New

VEVOR Articulating Borescope Camera with Light, Two-Way Articulated Endoscope, 6.2mm Slim Lens, 4.3" IPS Screen, 8X Zoom, IP67 Waterproof Inspection Camera for Auto, Mechanical Equipment (1.5m Cable)

Articulating Borescope Camera with Light and 180° Two-Way Flex for Multi-Angle Inspection 

The VEVOR articulating borescope camera with light has a probe tip that can bend 180° in either direction from the cable axis. This lets the camera inspect straight ahead, around corners, or at various viewing angles inside confined spaces. The handheld unit controls this two-way movement, allowing the operator to move around internal bends and point the lens at specific points of interest inside the inspection cavity. This design allows inspection angles that are difficult to achieve with a fixed, non-articulating probe. 

At a 6.2 mm (0.24 in) probe diameter, the lens enters the tight passages found in automotive engines, mechanical assemblies, HVAC ductwork, and industrial pipelines where larger-diameter probes cannot enter without disassembly of surrounding components. This makes the borescope a non-destructive inspection tool for maintenance tasks that would normally require taking parts apart.

6.2 mm Slim Probe with IP67 Waterproof and Oil-Resistant Lens for Harsh Environment Use 

The 6.2 mm probe diameter allows entry to tight spaces inside most engine cylinders, valve chambers, gearbox housings, and pipe interiors without having to widen the inspection point or remove nearby parts. The slim profile helps the probe move more easily through narrow passages, making it easier for the user to guide it through curved areas. 

The lens end of the probe has an IP67 waterproof rating, allowing temporary immersion in water under specified conditions while protecting against dust intrusion. It also protects against oil, coolant, hydraulic fluid, and cleaning agents that are common in automotive and industrial inspection settings. An oil-resistant lens surface stops the buildup of contamination that happens on unprotected lenses in oiled engine environments. This keeps the image quality clear during the check without having to clean the lens several times during the session.

4.3 in IPS Screen with 1280×720 HD Resolution and 8x Zoom for Detailed Visual Diagnosis 

The 4.3-inch IPS display shows the camera feed at a resolution of 1280x720 HD. The color accuracy and viewing angle uniformity that IPS panel technology provides are the same across the whole screen. This is important for correctly judging the condition of internal parts during engine and mechanical inspections.

With five zoom levels, 1x, 2x, 4x, 6x, and 8x, the user can go from seeing a large part of the inspection area to getting a very close look at a specific defect or measurement point without moving the probe. The 8x maximum zoom level lets you look at small surface details like crack propagation lines, pitting depth, seal degradation, and deposit thickness right on the 4.3-inch screen, allowing closer inspection directly on the built-in display. 

8 LED Lights with 3-Level Brightness Adjustment and Overheat Buzzer Alarm 

A probe tip with eight LED lights arranged around the lens aperture lights up the inspection area from multiple directions at the same time. This keeps shadows from internal surface features from hiding flaws when lighting comes from only one spot. The three-level brightness adjustment lets the operator lower the LED output in metal cavities that reflect light, where full brightness washes out surface detail, and raise it in heavily contaminated or deeply recessed areas that need the most light to show what is going on underneath.

Overheat protection constantly checks the lens temperature and sounds an audible warning when the probe tip gets to 85°C. This lets the operator know before long-term heat damage happens to the lens module or cable tip. This safety feature is important for checking engines that have just been used or industrial machinery that is still in use, since residual heat in the inspection cavity can raise the probe's temperature without any obvious signs, prompting the operator to allow the probe to cool before continued use. 

Articulating Borescope Camera with Light and 1.5 m Rigid Snake Cable for Stable Navigation 

Its 1.5 m semi-rigid snake cable maintains its shape during insertion, helping transmit push force to the articulating probe tip while reducing buckling. This means the probe tip stays in the same direction as the operator moves it throughout the inspection run.

The articulating borescope camera with light features a cable designed to resist exposure to oil, coolant, and solvents commonly found in automotive and industrial environments. This helps maintain the cable jacket and articulation performance during repeated inspection sessions while reducing surface wear caused by chemical exposure. 

2600mAh Battery, 32GB SD Card, and Photo/Video Recording for Extended Field Inspections 

The 2600mAh rechargeable battery provides up to 3–4 hours of continuous operation, suitable for many vehicle and industrial inspection tasks. This runtime is suitable for inspections of HVAC ducts, pipelines, and multi-cylinder engines without frequent recharging. 

The articulating borescope camera with light includes a 32GB SD card for storing inspection photos and videos. If the camera feed appears upside down from the operator's perspective, the 180° image rotation function corrects the display orientation, helping maintain the correct viewing orientation regardless of probe position.