VEVOR Electric Hoist, 880 lbs 230V Electric Winch with 14 ft Wired Remote Control, 40 ft Single Cable Lifting Height, Single/Double Slings, Emergency Stop, Lift Hoist for Garage Warehouse Factory

Electric Cable Hoist with Remote Control and 880 lbs Double-Cable Capacity 

Not every lifting job needs two tons of capacity — and a unit sized correctly for the task is always safer and more manageable than oversized equipment running well below its limits. This VEVOR electric cable hoist with remote control can lift up to 880 lbs (400 kg) in double-cable mode and 440 lbs (200 kg) in single-cable mode. This is the perfect weight range for most daily lifts in workshops, home garages, and light commercial settings.

The 40-foot single-cable lifting height is sufficient to reach the full ceiling height in almost all common installations. At 15.4 kg, the unit is light enough to move and install without professional help, yet strong enough to withstand repeated heavy pulls without breaking. 

Pure Copper Motor with Active Cooling for Consistent Lifting Performance 

This electric cable hoist with remote control features a motor with pure copper windings, a choice that directly affects the machine's performance under constant load. Copper is better at conducting electricity than aluminum, which means less energy is lost as heat during each cycle. Because of these factors, the torque output is stronger and more consistent from the first use of the day to the last, helping maintain consistent torque during extended use. 

During operation, a built-in cooling fan actively draws heat away from the motor case before it builds up to potentially harmful levels. This thermal management lets the unit handle many back-to-back lift cycles in a busy workshop without being turned off for too long because it is too hot or taking too long to cool down between uses. 

14 ft Wired Remote That Keeps Operators Away from the Load Path 

Staying out from under the hanging load is the most important safety habit to keep in mind when using a ceiling hoist. That is easy to do with the 14-foot (4.2-meter) wired remote—it gives the user enough space to stay safe and see the load clearly during the whole lift cycle without being too close to the machine. 14 feet of cable reach is sufficient to cover the entire work area beneath the hoist installation point in a typical garage bay.

In some situations, the wired link is better than a wireless connection. If you press a button on a wired remote, it will always respond right away, without relying on batteries during a job. This approach is different from wireless systems. The 14-foot wired remote is just the right distance for operators who value absolute reliability over wireless ease. It is close enough to keep control but far enough to stay safe.

Single and Double Cable Modes to Match Load Weight and Speed Requirements 

Every lift is different depending on whether it has a single- or double-cable arrangement. The single-cable setting moves up to 440 pounds at 27.6 feet per minute, which is fast enough to handle lighter loads without waiting too long between cycles. Lowering the speed to 13.8 feet per minute, the double-cable mode increases capacity to 880 pounds by distributing the load across two cable runs. 

The usefulness comes from being able to change settings on a single system. A shop that moves light tools and lifts heavy parts can use the same hoist for both tasks without any problems. They can adjust the hoist configuration depending on the job, instead of keeping two different units. The two cables also provide a good safety margin when lifting heavy items near the maximum weight limit. 

Electromagnetic Brake and Emergency Stop for Two Layers of Load Security 

Every ceiling hoist must be able to safely hold a load in the air between moves. When the motor power goes out, this unit's electromagnetic brake instantly engages, locking the load in place so it does not move or fall slowly. There is no need for continuous power input to hold the position, as the brake does so automatically. This means that the load stays exactly where the operator leaves it until they give another signal.

The emergency stop switch is separate from the normal raise and lower controls. It gives you a way to stop the mechanism immediately without using the main remote's features. If something goes wrong during a lift, such as a load swinging, the space is tighter than expected, or someone walks into the work area, one press stops everything right away. With two separate systems protecting each lift, if one fails, it does not affect the safety of the process as a whole, which is what you should expect from professional lifting equipment.

Electric Cable Hoist with Remote Control Ready for Garage, Factory, and Beyond 

Fitting ceiling mounts is meant to be easy. If you use metal or solid wooden strips to attach the hoist straight to crossbeams, you do not need any special hardware or complicated rigging. After mounting, most people have the unit set up and working in less than an hour. This electric cable hoist with remote control can handle all the tasks a normal workshop needs, such as moving heavy materials, lifting engines and gearboxes, and handling equipment during repair or installation work.

With a capacity of 880 pounds, a small footprint of 400 x 150 x 190 mm, and a unit weight of only 15.4 kg, this hoist takes up very little overhead space while still lifting loads. This VEVOR machine offers the right balance of capacity, safety, and ease of use for anyone setting up their first workshop hoist or adding a second installation point to an existing hoist.