VEVOR Deep Well Submersible Pump, 1100W 230V 50Hz, 7.1 m³/h Max Flow 105 m Max Head with 19.4 m Electric Cord, Stainless Steel Water Pumps for Industrial Irrigation and Home Use, IP68 Waterproof Grade

VEVOR 1.5 HP Deep Well Submersible Pump with 1100W Power and 105 m Head

Extracting water from deep underground sources requires a reliable pumping mechanism capable of sustaining consistent pressure. The machine is powered by a 1100W power source and a conventional 230V/50Hz AC power supply. This provides a steady output to meet real-world water supply demands. Whether you operate it for a few hours or a full working day, the VEVOR 1.5 hp deep well submersible pump maintains consistent performance without losing any.

This pump delivers a maximum head of 105 m (345 ft). That reach extends far beyond the depth most regular pumps can handle, opening access to water sources that would otherwise remain out of reach. A G1¼ discharge outlet keeps the flow path wide and clear, and the long 19.4 m (63.65 ft) power cord lets you reach the pump connection point without additional cable extensions right away.

14-Stage Impellers for Steady Flow and Deep, Reliable Water Delivery

Not all pumps can generate a steady flow at depth, and this one is designed expressly to do so. The 14-step thermoplastic impeller system generates pressure at each level to provide a maximum flow rate of 7.1 m³/h (31.26 GPM). The output is suitable for household water supply, garden irrigation, and light agricultural use when reliable delivery is more important than sheer volume.

With the tiered impeller technique, the pressure develops evenly rather than relying on a single component to do the job. This 1.5 hp deep well submersible pump delivers consistent performance whether operating at near-full capacity or handling modest needs throughout the day. The flow remains constant, the pressure is held, and the system operates without the variations that can be problematic to linked appliances, irrigation lines, or storage tank systems, which rely on a steady supply.

Full Stainless Steel Construction for Lasting Rust and Corrosion Resistance

Life underwater is hard on any material, and most pumps reflect that life. This unit takes a different approach, building the entire frame from stainless steel. Not just the exterior casing but the outlet and all connected components. Every portion that touches water is equally protected, leaving no weak areas for rust or corrosion to take hold.

That consistency in all components really makes a difference during the life of the pump. In mixed-material structures, joints and connectors are generally the first to fail because not all metals respond the same way to long-term exposure to water. The substance here is homogeneous throughout. The CE certification confirms it meets established safety and quality criteria, and the full IP68 rating for water resistance ensures it can withstand continuous submersion without damage. This model is a pump built to sit in the ground and remain running consistently for years to come.

Pure Copper Motor with Overheat Protection for Consistent Long-Term Use

This 1.5 hp deep well submersible pump is wound with pure copper in the motor, and that one design decision makes a huge difference in the pump’s day-to-day performance. Copper conducts better than standard motor windings. Hence, the motor stays cooler, utilizes energy more efficiently, and provides a steadier flow of water over lengthy periods of operation. Less heat build-up also implies less stress on the motor over time.

The built-in overheat protection adds to that reliability. If the motor temperature gets too high, the pump stalls, or it enters an unexpected operating condition, the pump immediately shuts down to prevent damage. That’s the kind of protection that really counts when the pump is left operating unattended, such as during overnight cycles or long irrigation periods. Very important note: Do not run this pump at low water levels or when the pump is dry. Even a short dry run will permanently harm the motor, and such damage is not covered under the usual warranty.

Clean, Uninterrupted Supply with Built-In Check Valve and Filtration Mesh

Good water quality and system stability are closely linked, and this pump addresses both. When the pump stops, the water is prevented from pouring back down into the well by the built-in check valve. Backflow means a loss of pressure, the risk of contaminating the supply line, and needless stress on the system every time the pump is restarted. The integrated nature of this valve eliminates that problem, and no separate installation procedure is required.

The stainless steel filtering mesh works in tandem with it to trap debris, sediment, and particles before they reach the pump’s internal working parts. This protection is critical, especially in the first few weeks after a newly drilled well, when fine debris is prevalent. In the meantime, you can place a sheet of gauze over the filter intake to create an additional barrier while the water clears. These two aspects work in tandem to maintain the water’s purity and the system’s efficiency, with significantly less maintenance attention over time.

VEVOR 1.5 HP Deep Well Submersible Pump for Industrial, Farm, and Home Applications

This 1.5 hp deep well submersible pump is really beneficial for that reason. It is quite adaptable to varied situations. It draws water from deep wells, reservoirs, canals, rivers, and other surface water sources without requiring any setup changes between applications. It can easily handle industrial water supply, agricultural irrigation, household well systems, and garden watering. Whatever the setting, it just gets connected and begins to work.

Installation is clean and simple. The primary requirement is that the well casing diameter must be at least 10 mm wider than the pump body to ensure the unit fits properly and water can flow around it. Once validated, the lengthy power cable and normal discharge connector make the rest of the operation quite uncomplicated. This 1.5 hp deep well submersible pump is for those who want a reliable, low-maintenance option capable of meeting real day-to-day demands - not a pump that needs regular attention or early replacement after one season of operation.