VEVOR Bypass Sliding Door Hardware Kit, 1829 mm Aluminum Alloy Dual-Track Bypass Door Hardware, Smooth and Quiet Sliding, Easy to Install, for 25 to 45 mm Thickness 915 mm Width 2 Door System

6 ft Dual-Track System for 36" Wide Doors with 150 lbs Per Door Capacity for Easy Sliding

The bypass door hardware kit includes a 6-foot dual-track system that fits 36-inch-wide closet and room doors. The built-in stacked-track design lets two doors move smoothly along their own paths, without getting in each other's way. Heavy, solid-wood or plastic door panels can weigh up to 150 lbs each, and the tracks will not sag. For normal 36-inch door widths, the 6-foot length covers enough of the track, and the overlap when the door is closed is just right. 

Because the tracks are different, you can slide either door to reach the items on either side. The 150-lb limit per door can hold heavy doors with glass, decorative panels, or thick, solid building materials. The 6-foot track length is just right for 36-inch doors. Hence, the doors can open properly, and the system runs smoothly the whole way. The method works well for closets in bedrooms, pantries, laundry rooms, and other places that need bypass doors.

Bypass Door Hardware Kit Fits 1" to 1 3/4" Door Thickness with Independent Door Movement

To accommodate various door types, the door hardware kit supports door thicknesses from 1 inch to 1 3/4 inches. In residential applications, this range fits standard hollow-core doors, solid wood doors, and composite panel doors. Without any changes or special adapters, the adjustable mounting system holds doors tightly across this range of thicknesses. 

The range of thicknesses covers most door panels, including custom door panels available from door suppliers and home improvement stores. Because each door slides independently, you can get to the back door by sliding the front door away instead of both of them moving at the same time. Each door operates smoothly on its dedicated track without binding, rubbing, or interfering with the other door's movement. 

Three-Wheel Hangers with Wear-Resistant Nylon Wheels for Smooth Rolling

The bypass door hardware kit includes three-wheel hangers that evenly distribute the door's weight across multiple moving contact points. There are three nylon wheels in each hanger. These wheels do not wear down easily and roll smoothly along the aluminum track without grinding against metal. The nylon wheel is quiet when in use and will not wear down after thousands of opening and closing cycles. 

The nylon is wear-resistant, so it keeps rolling smoothly without developing flat or rough spots over time. With three wheels instead of two, the hanger is more stable, and the doors do not sway or bounce during operation. All three wheels stay in contact with the track due to the balanced design, which evenly distributes the load across the hanger assembly. The nylon material does not make noise like metal wheels on metal tracks do.

Bypass Door Hardware Kit with Premium Aluminum Alloy Construction for Resisting Deformation and Rust

The bypass door hardware kit is made from a high-quality aluminum alloy, making it strong and less prone to bending when loaded. Even when 150-pound doors are on the tracks, the material stays straight and does not bend or sag over time. The metal does not rust or corrode when it comes into contact with water in bathrooms, basements, or other humid places. 

The aluminum alloy design prevents warping or twisting, which can occur with cheaper materials, making it hard to open and close. Because it does not rust, the metal maintains its appearance and functionality in damp places without breaking down or staining. When the temperature changes, the material's support properties stay stable. It does not expand or shrink too much, unlike some materials. 

Door Stoppers and Floor Guides for Stable Tracking

The bypass door hardware kit includes door stoppers that make it easy to access the back door during operation. These stoppers limit how far the front door can move, letting you slide it out of the way to fully open the back door. The kit also includes floor guides that ensure the doors slide smoothly and do not swing away from the wall. The guides ensure the door stays in the right place along the entire slide path.

With the door stoppers in place, the front door cannot slide too far and block the area where the back door tracks are. The floor guides connect to the floor and contact with the bottom of the door to stop it from moving side to side off the track. While the guides let the doors slide smoothly back and forth, they do not let them spin side to side, which could lead to binding or derailing. 

Easy Installation with Clear Steps and Multiple Size Options

The bypass door hardware kit features a simple design and clear installation instructions, making it easy to set up yourself. The kit comes with clear instructions on how to place the track, put in the hangers, and adjust the doors so they work properly. With multiple sizes, it can work with a wide range of door widths and opening sizes across a variety of room layouts. 

The clear steps for installation eliminate guesswork and prevent common mistakes that can affect how the door works or cause hardware to break. Because there are different sizes, you can choose the right track length for your door width without having to cut it to fit. Use the fasteners and mounting brackets that come with the hardware to attach it to standard wood or metal framing.