New

VEVOR Dual-Lens Articulating Borescope, Two-Way Articulated Endoscope Camera with Light, 5" HD IPS Spilt-Screen, 8X Zoom, 8 + 1 LEDs, IP67 Waterproof Snake Camera for Automotive, Plumbing (1.5m Cable)

Dual Lens Articulating Borescope with Front and Side Cameras Running Simultaneously 

The VEVOR dual lens articulating borescope features front- and side-facing cameras that operate simultaneously and display both views side by side. To see a side surface, the user has to move the tip away from the forward view, which means they lose sight of the front. With two separate cameras working at the same time, both views can be seen on the screen at the same time, without having to move the probe.

This dual-view design is useful for inspections where both forward progress and side wall conditions need to be monitored, such as engine cylinders and pipe junctions. This design allows both views to be monitored simultaneously, providing more inspection information with each probe insertion. 

5" IPS Split Screen Displaying Both Camera Feeds at the Same Time 

To support the split-screen layout without making each view too small to read important details, the 5-inch IPS display is larger than the 4.3-inch screen on the single-lens model. The screen shows both front and side camera feeds side by side, with each half rendering at sufficient resolution to identify surface defects, corrosion, debris, and sealant conditions without zooming. 

With an 854x480 screen resolution and a 1280x720 HD lens output, both feeds show pictures with accurate color reproduction and clear edges. IPS panel technology keeps the brightness and color consistent across the whole width of the display.

8+1 LED Configuration for Full-Coverage Illumination Across Dual Viewing Angles 

Nine LEDs—eight around the lens housing and one extra provide enough light to illuminate two camera angles at the same time from a single probe tip. The 9-LED arrangement provides balanced lighting for both camera angles and reduces shadows around the inspection area. 

Three adjustable brightness levels allow the user to balance illumination between the two camera feeds. When the probe is close to a highly reflective surface on one axis, like the wall of a polished metal cylinder that can be seen by the side camera, turning down the brightness keeps that feed from being overexposed while keeping the front camera, which may be farther away from its subject at the same time, well-lit.

5000 mAh Battery Supporting 5–6 Hours of Continuous Professional Inspection 

The 5000 mAh battery offers nearly twice the capacity of the 2600 mAh battery in the single-lens model. It can work continuously for 5–6 hours on a single charge. This longer runtime helps professionals complete extended vehicle checks, building surveys, and pipeline inspections without frequent recharging. 

The dual lens articulating borescope provides 5–6 hours of continuous operation, which is long enough to last a full normal work shift. A mechanic performing pre-purchase inspections in one day, or a building inspector checking the HVAC and water system of a whole building, does not have to worry about the battery dying. This means that they can check more before needing to recharge the battery. 

8 mm IP67 Probe with 1.5 m Rigid Snake Cable for Tight Space Navigation 

With its 8 mm probe diameter and 1.5 m rigid snake cable, this camera can easily move through engine bays, pipe systems, HVAC ductwork, and mechanical equipment cavities with limited access points and tight cable management requirements. To keep the probe in place in the cavity, the stiff snake design helps maintain directional control during insertion. This is different from fully flexible cables, which bend or curve when pushed through a curved or bent access path.

For drain inspection, wet pipe systems, and any other use where the probe comes into contact with standing water, the dual-lens probe's IP67 waterproof rating protects it during immersion up to 1 meter deep. The oil-resistant design at the lens tip adds protection for engine and mechanical checks where lubricant contact is likely. The two-way 180° flexibility still works in this case; the knob control moves both cameras in the same direction at the same time as the lens tip bends.

8× Zoom, 32 GB SD Card, and Photo and Video Capture for Full Documentation 

If the operator wants to enlarge an area of interest without moving the probe, they can use 1×, 2×, 4×, 6×, and 8× zoom levels on either the active camera feed or both feeds at the same time. When you zoom in 8 times on an engine part or pipe joint, you can see surface details that are not clear in normal view. This helps reveal fine surface details during inspection. 

The included 32 GB SD card stores photos and videos. These create a record of the inspection that can be reviewed later, shared with a client, or compared with another inspection done after the repair. It freezes the split-screen view at the moment of capture and saves both camera angles at the same time in a single image file, which a single-lens camera can not do.

Dual Lens Articulating Borescope for Automotive, HVAC, and Pipeline Inspection 

The combination of simultaneous dual-lens viewing, 5" split screen, 5000 mAh battery, and IP67 protection positions this dual lens articulating borescope among the capable options — suited to inspectors who work through multiple complex inspections per day and need a camera that delivers more visual information per probe insertion than a single-lens unit can provide. 

When holding the handset at an angle during floor-level or overhead access checks, the 180° image rotation function keeps the display oriented. The high-temperature alarm sounds if the probe tip detects heat levels that are too high for safe operation near engine parts, HVAC heating elements, or industrial process equipment. At 1.15 kg, the handset is still light enough to be used with one hand during a full inspection.