VEVOR Low Profile Floor Jack 3 Ton (6600 lbs), Heavy Duty Aluminum Hydraulic Racing Floor Jack, Hydraulic Car Jack, Dual Piston Quick Lift Pump, 3.7"-18.3" Height Lifting Range (Yellow)

3 Ton Aluminum Low Profile Floor Jack for Heavy-Duty Lifting Power 

Rated to lift 3 tons (6,613 lbs / 3,000 kg), this 3 ton aluminum low profile floor jack lifts sedans, SUVs, and light trucks with ease. The high load capacity lets both home and professional mechanics lift a variety of vehicles without exceeding the rated limits. The jack is designed to provide stable lifting with minimal movement under rated loads. 

This lifting capacity makes the jack suitable for routine maintenance tasks. It is a reliable choice for shops that work on a variety of cars during the week, from small sedans to mid-sized SUVs and trucks. Professional mechanics and home users can use the same jack for a wide range of tasks, from quick tire changes to longer undercarriage jobs without switching between different jacks for most compatible vehicles.

Dual-Piston Rapid Pump for Fast 3.5-Stroke Lifting 

Compared with many single-piston floor jacks, which require 12 or more pump strokes to lift most cars, the dual-piston pump system requires only 3.5. When two parallel cylinders work together, hydraulic fluid is delivered more quickly to the lifting system. This means you don't have to pump the handle as hard or as long before you can work under the car.

To protect both the jack and the vehicle from damage, a built-in overload safety valve opens automatically if the load exceeds the rated capacity. There are no oil leaks in the hydraulic cylinder even after many lifts. This means that the jack's performance stays the same, without gradual pressure loss. The quick dual-piston stroke and reliable overload protection make it possible to safely lift and lower a vehicle with a lot less downtime between jobs.

3.7"-18.3" Lifting Range for Low-Clearance Vehicle Access 

This jack's low profile makes it easy to slide under vehicles with low ground clearance, such as sports cars and lowered sedans that higher jacks cannot reach. Its minimum height is 3.7 inches (93 mm) and its maximum reach is 18.3 inches (465 mm). The low entry height allows easier access to vehicles with limited ground clearance. 

The 18.3-inch height gives you enough clearance to change tires, fix brakes, repair exhaust systems, and work on the suspension of larger SUVs and trucks. Combined with its lifting capacity, this tool can handle almost all the work in a mixed garage, so you do not have to switch between jacks for different clearance needs. Check your vehicle's lifting point height to ensure compatibility. 

Welded Aluminum Alloy Frame for Corrosion-Resistant Durability 

The fully welded frame of this 3 ton aluminum low profile floor jack makes it lighter and less likely to rust than steel jacks. Even in a damp shed, the aluminum construction resists corrosion and provides structural strength and rigidity. 

The jack is easier to move between vehicles or storage spaces because aluminum is lighter than iron or steel. This is helpful for people who work in more than one work bay or need to bring tools to a job site. At 48.1 lbs (21.8 kg), it is still easy for one person to lift without losing any of its lifting power. This makes it a good choice for mobile mechanics and home workshops without heavy-duty lifting gear. Welded seams make the frame more rigid, so the jack stays in place and in shape even after repeated loading and unloading.

Detachable Two-Piece Steel Handle with Rotating Rubber Saddle 

The handle is made of reinforced carbon structural steel and is split into two pieces for easy storage. This means that the jack takes up less room in a trunk, toolbox, or closet shelf. Raising and lowering the jack is easier with the long handle than with shorter ones because it provides greater leverage. It also helps reduce operator effort during repeated use. 

At the lift point, a rotating rubber saddle can be adjusted to align perfectly with the vehicle's original support points. This cushion contacts the underside of the car and helps prevent scuffs or dents. With a smooth, controlled descent, turning the handle counterclockwise lowers the vehicle. This gives you confidence when working under a raised vehicle. The sturdy handle and adjustable saddle make it easy to place and use the jack, even for people who have never done car maintenance at home before.

3 Ton Aluminum Low Profile Floor Jack with Swivel Casters for Easy Mobility 

Large front wheels and rear swivel casters let this 3 ton aluminum low profile floor jack roll smoothly across a garage floor, even while supporting a partially lifted vehicle. Because there are a handle on each side, you can push, pull, or move the jack to exactly where you need it.

This mobility, along with the jack's small size (26.4 x 12.6 x 8.3 inches), makes it easy to move around a crowded garage or to work from one car to another without lifting heavy items. It combines lifting capacity with convenient handling for everyday garage use. The compact design, reinforced frame, and smooth-rolling wheels make it easy to position, operate, and store after use.