VEVOR 5000 kg Electric Chain Hoist, 9.1 m Lifting Height, Three-Phase Overhead Crane with 100 m Wireless & 8.2 m Wired Remote Control, Double G100 Chain Hoist for Factories, Warehouses, Garages

100 m Wireless and 8.2 m Wired Remote for Flexible Hoist Operation 

This industrial quality electric chain hoist includes both a wired pendant for close range control and a wireless remote with a 100 m range. The wired pendant provides workers with direct tactile feedback during detailed positioning work. The wireless remote, on the other hand, lets them control the machine from a safer distance when loads swing wide or when spaces make it hard to move.

You do not need any special tools or changes to the setup to switch between control modes. Operators can move around the area without changing positions to reach a fixed panel. The wireless range includes large bays, outdoor staging areas, and warehouses with multiple bays, where workers are often far from the hoist. Both types of controls have emergency stop buttons, so no matter which remote a user is holding, they can quickly shut down the system.

Upper and Lower Limit Switches with Auto Braking for Secure Lifting 

This electric chain hoist has upper and lower limit switches that turn off the motor when the hook moves too far. When the lower travel limit is reached, the chain cannot go too far, the hook cannot hit the hoist body, and the load cannot fall without being managed. The user does not need to take any action during each lift cycle to stay within safe limits.

If the power goes out, the auto-braking device stops the load immediately and holds it in place so it does not move or fall. The emergency stop feature allows operators to immediately shut down the machine if unexpected hazards appear on the floor below. This heavy-duty electric chain hoist has three safety features: limit switches, auto-braking, and an emergency stop. These features make it a reliable choice for lifting heavy objects where safety gaps cannot be flexible. 

Industrial Quality Electric Chain Hoist with IP55 Aluminum Motor Housing 

The metal motor housing on this electric power hoist has an IP55 rating, which means it is dust-tight and can withstand water jets from any direction. The aluminum housing is lighter than steel housings and dissipates heat faster. This trait helps the motor last longer in harsh environments such as factories and industrial workshops.

Insulation with an F class rating can last for a long time in temperatures up to 155°C, which is much higher than the temperatures that most hoists work at during standard shifts. The built-in fan moves air through the motor while the motor is running, preventing it from overheating during long lift cycles. The IP55 enclosure, F-class windings, and active cooling system of this hoist make it reliable enough for daily use in harsh industrial settings for heavy work, so it does not need to be serviced very often. 

5000 kg Lifting Capacity with Industrial Quality Electric Chain Hoist Performance 

This industrial quality electric chain hoist can lift up to 5,000 kg (11,000 lbs) on three-phase 380–415V, 50 Hz power, making it a capable solution for heavy manufacturing, construction, and logistics settings. The motor maintains constant torque throughout the 9.1-meter lift height, enabling it to handle engines, structural steel, and large parts without performance loss.

Operators in factories, warehouses, or garages get a hoist that maintains rated capacity on every lift, with no warm up cycles or load adjustments needed. Full load torque delivery is smooth and stable thanks to the three-phase power system. This hoist is easy to install on standard overhead crane beam systems because it has a net weight of only 155 kg and measures 695 × 420 × 760 mm.

2 Speed Motor Control for Fast Lifts and Precise Load Positioning 

This overhead crane hoist has two different speeds: 10.8 feet per minute for quick repositioning and 3.6 feet per minute for precise placement. The operators can smoothly change speeds without stopping the lift. This feature saves time during long production shifts and reduces operator fatigue.

The slow speed mode is very helpful when dropping heavy parts onto precise fixtures or mating surfaces where exact placement is important. Fast speed handles the bulk of vertical travel, and slow speed does the final few inches of descent. Any operator can feel confident in their control, regardless of load size or destination, thanks to this two-speed system.

Dual G100 Alloy Steel Chain System for Balanced Heavy Load Lifting 

There are two G100 grade steel chains running in parallel on this industrial quality electric chain hoist. This feature spreads the load weight evenly across both lines. The two chains work together to keep big loads stable during every lift cycle and prevent uneven stress. This setup gives you steady tension and a good grip at full rated capacity, whether you are moving steel beams, engine blocks, or industrial machinery.

Because these chains are G100 grade, they can handle high-impact and high cycle loads much better than standard grade links. Each chain link resists deformation under sustained load, which keeps both the hoist and the cargo below safe. With the 360° rotating forged hook, this system makes sure that workers correctly align the load before each lift. This feature reduces swing and improves control in warehouses, factories, and workshops.