VEVOR 6L Upgraded Ultrasonic Cleaner (400W Heater,180W Ultrasonic) Professional Digital Lab Ultrasonic Parts Cleaner with Heater Timer for Jewelry Glasses Instruments Cleaning

6 Liter Ultrasonic Parts Cleaner with 40kHz Frequency for Deep Crevice Cleaning 

The VEVOR 6 liter ultrasonic parts cleaner works at 40 kHz and makes high-frequency cavitation bubbles that can reach holes, surface crevices, and small cracks that you cannot reach by hand. This frequency effectively removes oils, wax, and stubborn surface spots without damaging the cleaned item. The end result is a full clean that does not damage even delicate or carefully machined surfaces.

By processing multiple items at once, the 6L tank size increases throughput without compromising cleaning quality. It is good for use in professional settings that require demanding conditions, such as jewelry studios, dental offices, and optical labs. The 40kHz frequency distributes the energy in the tank, so the results are the same for everything, whether you are processing small parts in groups or cleaning one-of-a-kind, precise instruments. 

Dual Built-In Transducers Delivering 180W Ultrasonic Power for Consistent Cleaning Results 

Two built-in ultrasonic transducers, creating a total output of 180W, spread cavitation energy evenly across the floor of the 6L tank. This even spread eliminates dead zones, or places where cleaning energy drops off, so everything in the tank gets the same treatment no matter where it is placed. When working on several things at once, it is especially important to maintain steady energy coverage, as uneven output can lead to inconsistent batch results.

The 180W output from the transducers is well suited to the 6L chamber size, as it delivers sufficient power to clean oils, biological residues, flux, and mineral deposits without placing excessive stress on sensitive parts. The transducers are designed to remain operational even after many cleaning cycles; they continue to produce the same signal over time. Because of this, the device is a good choice for work settings that need daily stability and repeatability. 

300W Heating System with 0–80℃ Adjustable Temperature to Accelerate Dirt Removal 

The 300W heating element rapidly raises the solution's temperature and maintains it throughout the cleaning cycle. The operator has precise control over the thermal environment and can adjust the temperature from ambient to 80°C. Heat loosens oils, waxes, and biological debris by reducing their adhesive strength, thereby shortening the time required for ultrasonic action to complete the cleaning process. For optimal cleaning effectiveness, heating and ultrasonic operation can operate concurrently, combining thermal and acoustic energy.

Lower temperature settings enable operators to still reap the benefits of ultrasonic cavitation for heat-sensitive materials without subjecting them to needless thermal stress. Higher temperatures can be confidently chosen for applications needing near-sterilization conditions or substantial soiling. From consumer jewelry and eyeglasses to precision optical instruments and scientific glassware, the cleaner's adjustable range makes it adaptable to a wide range of items and cleaning needs.

0–30 Minute Digital Timer with Auto Shut-Off for Reliable Hands-Free Operation 

Cycle durations can be set between 0 and 30 minutes using the digital timer, and the machine will automatically shut off when the predetermined period is reached. This feature prevents overprocessing of delicate materials, such as coated lenses or adhesive-set stones, and eliminates the need for manual monitoring. It is useful in hectic work settings where employees must divide their attention among several tasks, since the machine stops at the end of the cycle without requiring operator input.

The straightforward control interface reduces the learning curve for novice operators by allowing them to initiate a cleaning cycle with minimal setup. In regulated contexts like dentist offices or quality-controlled manufacturing facilities, repeatable timer settings facilitate standardized cleaning processes. Throughout the process, the digital display keeps users informed without needing close attention by providing a clear, real-time readout of the remaining cycle time.

304 Stainless Steel Tank with Leak-Proof Integral Design for Long-Term Durability 

The 6 liter ultrasonic parts cleaner is made of 304 stainless steel, a grade chosen for its ability to resist rust and corrosion and to withstand the use of a variety of cleaning agents in professional settings. The device is completely sealed against water leaks, and the integral construction ensures there are no joints or seams inside the tank that could eventually fail. Even under everyday usage in challenging conditions, this construction quality ensures dependable, long-term operation.

Because the flat inside surface of stainless steel does not retain residues, odors, or chemical traces between cycles, it also makes tank maintenance easier. This feature is especially crucial when moving between different types of items or cleaning agents throughout the workday. Rings, necklaces, dentures, coins, eyeglass frames, and small instruments are just a few of the items the tank's 6L capacity can hold, making it appropriate for both daily and professional cleaning applications across a variety of sectors.

6 Liter Ultrasonic Parts Cleaner with Valve Drain, Handle, and Anti-Slide Feet for Easy Use 

With a built-in valve and a 1-meter drain line, this 6 liter ultrasonic parts cleaner allows you to swiftly and thoroughly empty the tank without tilting or lifting the device. This feature is a useful benefit in high-throughput environments where efficient modifications to solutions between batches are required. The stainless steel cover prolongs the cleaning solution's useful life by keeping impurities out during idle times and lowering evaporation during heated cycles.

The unit has anti-slip rubber feet that hold it securely in place during use, and its portable handle makes it easy to move between workstations. The small footprint, weighing 4.6 kg and measuring 325 x 175 x 275 mm, is suitable for ordinary shelving and benches. Built-in heat dissipation enhances long-term dependability by shielding internal components during prolonged use. When combined, these characteristics make the device ideal for ongoing professional use in light-industrial, jewelry, optical, and dental contexts.