VEVOR 1000 kg Electric Chain Hoist, 6 m Lifting Height, 230V Single Phase Overhead Crane with 4.5 m Wired Remote Control, G100 Chain Electric Lift Hoist for Factories, Warehouses, Garages

G100 Alloy Steel Chain Electric Lifting Hoist for Maximum Load Reliability

With its G100 alloy steel chain, this electric lifting hoist can handle heavy industrial loads without stretching or deforming. With a rated capacity of 1000 kg, the chain distributes the load evenly across both strands, reducing stress concentration. It works the same way every time, whether you are lifting engines, steel beams, or big machine parts. The chain's surface has been heat-treated to protect it from wear and rust.

The two-chain design constantly balances each load from the hook to the motor. This feature eliminates the uneven pull that wears out single-chain units too quickly. A forged hook that can rotate 360° locks onto rigging points at any angle, so workers do not have to move the load around all the time. VEVOR makes this chain system work efficiently in places like garages, factories, and warehouses where uptime is important.

Dual-Speed Control for Precision and Power in Every Lift

This electric lifting hoist has two different speeds: 13.2 ft/min for quick vertical movement and 6.6 ft/min for exact load positioning. With the wired pendant, you can quickly adjust the lift speed to match the job. In fast mode, you can quickly move large objects, and in slow mode, you can precisely control assembly, alignment, or placement with little space between objects.

Because the motor has two speeds, you never have to choose between safety and economy. The speed of operators performing engine swaps or staging parts should slow when exact placement is required. When the speed changes, it does not happen suddenly, which could damage fragile parts or cause loads to become unbalanced. The VEVOR electric lifting hoist operates at two speeds, making it useful for both heavy industrial lifting and fine mechanical work.

15 ft Wired Pendant for Confident Close-Range Operation

With the 4.5-meter wired pendant, operators get a direct signal reaction right away, without the delay or risk of interference that comes with wireless systems. When you press a button, the motor acts right away, so you can keep your full attention on the task at hand while placing carefully. The length of the pendant's cable maintains operators' safe viewing range of the load throughout the entire lift cycle.

For up, down, fast, slow, and emergency stop, VEVOR makes pendant controls with clearly marked buttons. The tactile layout lets workers focus on the job instead of fumbling for the right button under a lot of stress. The wired system maintains a strong signal, so the electric chain hoist does not experience signal dropout in a busy workplace or a single bay garage. Without this feature, load drift or sudden stops during important lifts would happen.

Upper and Lower Limit Switches for Automatic Travel Protection

When the hook reaches the end of its travel range, the electric lifting hoist's upper and lower limit switches cut power to the motor. The upper limit keeps the hook block from hitting the motor housing, and the lower limit keeps the chain from going too far and jumping the sprocket. Both switches operate automatically, so workers do not have to keep an eye on the hook position while lifting items repeatedly.

When the power goes out, the automatic stopping system kicks in right away, locking the load in place so it does not move or fall. An emergency stop button on the pendant gives you another way to turn it off by hand so that you can do it right away in any situation. Together, these different layers of safety keep every lift cycle within the set limits. VEVOR builds all safety features into the hoist's body without making it bigger or harder to use every day.

IP54-Rated Motor with F-Class Insulation for Industrial Durability

The AC 230V motor has an IP54 rating, which means that dust and water splashes from any direction cannot enter its internal parts. A built-in cooling fan actively manages heat during long lifting sessions. This feature keeps heat from building up, which, over time, hurts the motor's performance. Because it has F-class insulation, it can handle continuous operating temperatures that regular motors cannot. This feature makes the unit reliable for long shifts every day.

While under load, the aluminum alloy housing maintains a net weight of 29 kg, keeping the structure stable. The small size (525 × 170 × 275 mm) makes it possible to fit in tight overhead spaces where larger hoists cannot fit. This unit works with standard 230V single-phase power, so you can connect it to existing workshop circuits without needing special industrial wiring.

6 m Lifting Height Electric Lifting Hoist for Versatile Overhead Reach

This electric lifting hoist can reach a height of 6 m, which is high enough to move car frames, mezzanine levels, and tall warehouse racks. You can work at full height in most business garages and light industrial bays without having to move the trolley. When not in use, the 6 m chain fits nicely into the built-in chain bag, leaving the work area clear.

You can attach the hoist to I-beam trolleys, fixed ceiling hooks, or overhead crane rails, depending on what kind of support you already have in your building. This machine has a lifting path of 6 meters and a maximum weight of 1000 kg. It can remove engines, lift pallets, and set up equipment all at once. VEVOR designs the chain guide and sprocket so that the chain does not twist or go out of line under maximum load.