VEVOR Low Profile Floor Jack 2 Ton (4400 lbs), Heavy Duty Iron Hydraulic Racing Floor Jack, Hydraulic Car Jack, Single Piston Quick Lift Pump, 4.9"-13.2" Height Lifting Range (Yellow)

Heavy Duty Low Profile Floor Jack with 4.9" Minimum Height for Sports Cars 

One of the standout features of this VEVOR heavy duty low profile floor jack is its 4.9-inch (125.2 mm) minimum height. It is low enough to slide under sports cars, lowered sedans, and other vehicles with low ground clearance that regular floor jacks cannot reach without scraping the chassis. This clearance allows the jack to fit under many sports cars and lowered sedans without contacting the chassis. 

The highest lift height of 13.2 inches (335 mm) is sufficient to change tires, check brake systems, replace exhaust components, and perform general undercarriage maintenance on most passenger cars. This 8.3-inch total travel range, from entry height to maximum lift, gives you the space you need to service cars without moving around mid-job.

2-Ton Hydraulic Lifting Capacity for Sedans, SUVs, and Light Trucks 

For regular garage maintenance, the 2-ton (4,409 lbs/2,000 kg) maximum lifting capacity is sufficient to handle the axle weight of many family sedans, sports cars, compact SUVs, and light pickup trucks. It is suitable for lifting many passenger cars, compact SUVs, and light-duty vehicles within its rated capacity. 

While the machine is under load, the hydraulic system gradually and smoothly applies the lifting force. The hydraulic system delivers smooth, controlled lifting throughout operation. The rated 2-ton capacity applies to the whole lifting range, from the lowest height to the highest. The jack is designed to provide stable lifting throughout its operating range. 

Single-Piston Quick Lift Pump for Fast and Controlled Vehicle Raising 

The single-piston hydraulic pump is designed to lift the car quickly, so it can reach working height with fewer handle strokes than multi-stage or slow-build pumps. Because this quick-lift mechanism takes less time, lifting a car to maintenance height is easier for people who use the jack frequently during the workday. The pump delivers smooth and consistent lifting performance. 

To lower the vehicle, turn the handle anticlockwise. This lets out the hydraulic pressure slowly and steadily, so the vehicle does not fall all at once. You need this smooth descent control to safely lower vehicles back onto stands or the ground without putting excessive stress on the hydraulic cylinder or letting the vehicle hit the floor too quickly. 

Sealed Hydraulic Cylinder with Overload Safety Valve for Leak-Free Operation 

A sealed hydraulic cylinder helps reduce the risk of oil leakage and supports stable lifting performance. This is more than just a nuisance; it directly affects the system's ability to support the load. The cylinder on this jack is well-built and sealed, which helps minimize oil leakage during normal operation. 

When the load exceeds the 2-ton rated capacity, the built-in overload safety valve opens automatically, releasing hydraulic pressure in a controlled manner before a structural overload can damage the cylinder or cause it to fail suddenly. This automatic safety system protects against overloading without the operator having to do anything. It works even if the user is not aware that the load limit has been reached. 

Q235A Welded Iron Frame with Thickened Carbon Steel Handle for Structural Strength 

The jack body is constructed from Q235A steel because it is strong enough to withstand pulling apart and easy to weld. The welded frame helps improve structural rigidity during repeated use. The steel construction gives the unit the stability it needs to keep it from rocking side to side under uneven loads without making it too heavy to move.

Carbon structural steel that has been strengthened and thickened is used to make the handle. It is made to resist bending or breaking when the jack is fully loaded and pumped. Failure of a handle during a lift is a major safety risk. The higher wall thickness and carbon steel specification directly address this failure mode in the handle design, rather than relying on use to avoid overstressing a lighter-gauge part.

Rotating Saddle and Swivel Casters for Precise Positioning and Easy Maneuvering 

The heavy duty low profile floor jack features a rotating saddle that automatically aligns the lifting platform with the vehicle's jacking point during the first contact phase. This works even with a small angle difference between the jack and the chassis lift point, without putting any stress on the saddle or the vehicle's sill. This ability to self-align reduces the risk of saddle sliding early in the lift, when the vehicle's weight is first being transferred to the jack and small positional adjustments are most critical.

You can easily move the jack across a workshop floor and precisely place it under the vehicle's jacking point using its two large rear wheels and two front swivel casters. The swivel casters allow for a small turning radius when approaching, which makes it easy to place the jack correctly in tight spaces between the wheels and the bodywork. 

Heavy Duty Low Profile Floor Jack with Storage Case for Portable Workshop Use 

The VEVOR heavy duty low profile floor jack comes with a storage case that keeps the unit safe during transport and neat when stored. The case fits the jack body and the removable handle together in a small package. This makes it easy to carry the jack in the trunk of your car in case of roadside emergencies or to store it efficiently in a garage with limited space without the handle sticking out or the jack rolling around. 

With dimensions of 447 x 200 x 180 mm and a weight of 18.8 lbs, this unit is small enough that one person can move and set it up without help. The steel construction gives it rigidity and load-bearing stability that cheaper aluminum options cannot match.