New

VEVOR Fiber Fusion Splicer 6 Motors with 5s Fast Splicing and 15s Heating, 7800mAh Core Alignment Fibers Optical Splicer with 5" Touchscreen, 3 in 1 Fiber Holder, VFL & OPM for SM MM DS NZDS

6-Motor Core Alignment with 0.1 μm Accuracy for Low-Loss Fiber Fusion Splicer Machine Results

This fiber fusion splicer machine uses six powerful motors to place each fiber with 0.1 μm accuracy. Correct alignment matters because even a small gap between two cores can weaken the signal. The multiple motors ensure both fibers are centered before the arc fires. Multimode fiber can have fusion loss as low as 0.01 dB, keeping your optical links clean and performing well.

When technicians build or fix networks, they don't have to guess how each joint should fit together. This fiber fusion splicer lets you make small changes to the machine, so you can get more done and spend less time re-splicing. The six-motor system makes reliable, low-loss connections, which professional setups need, whether they are ending fiber in a data center or fixing a broken line out in the field. 

5s Splicing and 15s Heating for High-Throughput Field Work

The AI-9 proves its worth with speed. It takes only 5 seconds to make a splice and 15 seconds to complete the heat-shrink cycle. This means that it takes less than 30 seconds to make a full join from alignment to protected sleeve. When you have to complete many fiber terminations in one shift, those saved seconds add up to real hours over the course of the project.

On large deployments, short cycle times also keep people from getting tired and keep the momentum going. You do not have to wait between connections because you move steadily from one fiber to the next. This keeps the machine from becoming a bottleneck. This efficiency is especially helpful for contractors paid by the drop, since throughput directly affects earnings. The unit works well with busy commercial schedules and tight installation deadlines because it splices and heats quickly.

5" Touchscreen with 320x Magnification for Precise Splice Monitoring

If you can see your work clearly, you can tell the difference between a good splice and a bad one. Change settings and watch each join in real time on the 5-inch touchscreen. You can zoom in on either the X or Y axis separately at 320x or on both at 200x, so you can check the alignment from the position that shows the most detail.

The responsive touch interface makes every step easier, from selecting the fiber type to viewing the splice results on the screen. It supports 12 languages, so operators worldwide can work in their preferred language. It is even more convenient to connect a Bluetooth app to your phone and pair the unit with it for greater control and monitoring. These features work together to make a complicated process easy to follow. Both new and experienced splicers can rely on this fiber fusion splicer machine.

3-in-1 Fiber Holder Supporting SM, MM, DS and NZDS Fibers

The built-in 3-in-1 fiber holder is flexible and supports multiple fiber types without extra attachments. The unit works with single-mode, multimode, bare, and pigtail fiber, as well as dispersion-shifted and non-zero dispersion-shifted fiber. Because it works with so many fiber types, you only need one tool for all your projects and network standards.

Using a single holder for multiple fiber types reduces the need to fiddle with adapters and switch fixtures mid-job. The holder keeps the fiber in place for a clean splice. All you have to do is load the fiber. As a result, teams working with mixed infrastructure don't have to carry as many tools and can keep their workflows the same. This sensible design choice reflects how technicians really work when they switch between residential, commercial, and carrier-grade installations.

Built-in VFL and OPM for Complete Link Testing in One Fiber Fusion Splicer Machine

The AI-9 can diagnose and connect fibers. The Visual Fault Locator sends a visible light down the fiber to find breaks, bends, and bad connectors. The Optical Power Meter checks signal levels and measures insertion loss at each point. Because both tools are built into the fiber fusion splicer, you don't have to carry two separate devices to test continuity and link transmission quality.

This integrated testing saves time and reduces the chance of missing faults. After splicing, you can check right away to confirm the connection is good and light is passing through without issues. This way, you can catch problems early, before they become expensive callbacks. For field work, fewer instruments also mean a lighter load. The machine supports a full verify-as-you-go method, combining splicing and measurement in one portable unit to keep installations accurate and clients happy.

7800mAh Battery and Portable Kit for Extended Outdoor Operation

When working at remote sites or outdoors, you need long-lasting power. The 7800mAh rechargeable battery provides about 260 continuous splice and heat cycles on a full charge. That means you can work for a long time without being near a power outlet and without constantly searching for one. As a result, you can stay productive from the first splice to the last.

This kit has everything you need for work on the move. The splicer, fiber cleaver, fiber stripper, stool, bare fiber for arc calibration, alcohol bottle, straps, wrenches, and cleaning brush are all in a portable carrying case. Between jobs, everything stays put away and safe, so you're ready to start when you get to the site. The unit weighs only 7.05 kg, so it is still easy to move around. Its all-in-one design makes this fiber fusion splicer machine a reliable tool for technicians in the workshop and the field.