VEVOR Swing Gate Operator Double Automatic Gate Opener Up to 300kg and 2.7m Long 50W AC Wing Gate Automatic Gate with Complete Push/Pull to Open Remote Control Kit 16mm/s

Automatic Double Gate Opener with Dual 50W Motors

With each 50W actuator operating on 24V DC power to independently operate its gate leaf while coordinating with the other, this automatic double gate opener is a full two-motor system. Since each gate leaf has its own dedicated actuator instead of sharing a single motor across a single moving panel, this dual-motor design is what really sets this kit apart from a single swing gate opener.

With an IP44 rating for reliable outdoor use, each steel actuator can withstand frequent exposure to dust, rain, and temperature fluctuations without gradually losing functionality. This automatic double-gate opener includes the matched set of actuators required to move both leaves easily and consistently for anyone establishing a true double-gate entrance. This eliminates the potential for power or timing mismatches that could arise from combining two unconnected single-gate motors.

Master/Slave Gate Settings for Synchronized Dual Operation

The two motors can communicate and coordinate their movements through an integrated master/slave gate design, ensuring both gates open and close in the correct order rather than acting independently or out of sync. For a twin-gate setup, this synchronization is crucial, as improper timing between the leaves could cause one gate to bind against the other or leave an uneven gap during operation, creating aesthetic and functional issues at the entry.

In addition to a single- or dual-gate setting, this automatic double-gate opener lets installers customize the system for the specific gate configuration they are automating. A single-actuator gate opener would not require or incorporate that type of built-in configuration choice because there is only ever one motor to control, rather than two that must operate in tandem.

16mm/s Actuator Speed with 300kg Per-Leaf Capacity

With a maximum actuator travel of 15 inches (38.5 cm) per motor, each actuator in this automatic double gate opener travels at a speed of 16 mm/s. Gate leaves up to 9 feet (2.74 meters) long and up to 661 pounds (300 kg) apiece can be accommodated by that per-motor travel distance, which means the system is rated per leaf rather than as a total across both gates.

Since a twin-gate design usually consists of two leaves of comparable size and weight that function together to span a single entry, the per-leaf capacity rating is important for precisely sizing this system for a particular gate installation. This automatic twin gate opener can manage a large combined entrance width because each side is rated independently at 300 kg. This prevents one motor from overworking the other and ensures each motor is matched to its assigned leaf.

Remote Control with 60-Second Auto-Close Function

With the two remote controls included in this package, which have a range of up to 98 feet (about 30 meters), you can open or close the gate from inside your car without going outside or using a manual latch. The gate adds a degree of convenience and security by automatically closing after 60 seconds, so you don't have to remember to do so each time you walk through.

The controller/actuator configuration in this automatic double-gate opener is designed to manage both motors concurrently, rather than just one, which is necessary for a double-gate setup. Despite the added difficulty of coordinating two distinct actuators to move together seamlessly each time the remote is used, drivers still enjoy the same one-touch ease they would expect from a single-gate system.

Soft Start and Stop with Obstacle Sensitivity Adjustment

By easing into motion rather than abruptly starting or halting, the built-in soft start and stop capability lessens mechanical strain on both motors and gate hardware. In a dual-motor system, where both actuators must remain correctly synchronized and mechanically sound for years of continuous use without one motor wearing out faster than the other, this smoother operation reduces wear over time.

Designed to work in conjunction with a photocell beam system, automatic stop-and-reverse capability adds a safety layer by stopping or reversing the gate's movement if an impediment is detected in its path. To ensure both gate leaves behave consistently under the same settings rather than reacting differently to the same obstruction, installers can also fine-tune the automatic double gate opener's sensitivity to obstacles or external forces.

IP44-Rated Automatic Double Gate Opener for Outdoor Use

Regardless of local weather patterns or seasonal conditions, this automatic double gate opener, which has an IP44 protection rating on both actuators, is designed to withstand frequent outdoor exposure and is suitable for commercial properties, farms, ranches, and residential driveways. If the electric system loses power at an inconvenient time, entry is not entirely prevented; a manual release key allows the gate to be opened by hand.

Because a single-wide leaf would be too heavy or impractical to swing securely on its own, this dual-motor kit is suitable for a variety of sites, including homes, farms, factories, stores, villas, and agricultural settings where a double-gate entrance is common. This double gate opener provides the full two-motor system needed to automate that setup correctly from the beginning for anyone managing a wider entrance with two coordinated gate leaves rather than a single swinging panel. This eliminates the need to source and match individual components from various suppliers.