VEVOR Tap and Die Set, 60-Piece Metric M3 to M12 and SAE Sizes, with Coarse and Fine Thread Taps and Dies, Wrench, Carrying Storage Case and Complete Accessories, for Threading and Rethreading

High-Carbon Chrome Bearing Steel Construction for Superior Thread Cutting Durability

VEVOR makes each tap and die in this set from high-carbon chrome vanadium steel, providing each tool with the hardness and edge retention needed to handle challenging threading jobs. A heat treatment procedure at 1472°F/800°C hardens the steel throughout, creating a tool surface that is resistant to deformation even under continuous pressure. This heat treatment process helps tools maintain their edge longer than those that get dull after a few uses.

A metric tap and die set that provides reliable cutting performance over hundreds of threading cycles is the result. The steel construction maintains dimensional accuracy without chipping or cracking, whether a specialist uses stainless steel fasteners or a hobbyist threads machine screws into aluminum parts. For high-frequency tasks, users can rely on these tools without having to plan for early replacements.

58–62 HRC Hardness Metric Tap and Die Set for Accurate, Durable Performance

This metric tap and die set has a hardness rating of 58–62 HRC. At this degree of hardness, the cutting edges produce clean, burr-free threads that engage fasteners firmly and maintain tight tolerances during threading. Every tap and die has stamped markings that clearly identify each tool, allowing the user to choose the right size in a shop setting without guessing.

VEVOR achieves this hardness consistently across all 60 pieces, not just the most popular sizes. In practical applications, where a worn-out or mismatched tool can damage the workpiece or produce loose threads, this consistency is crucial. After repeated use, every component in the kit maintains its geometry, providing the same thread quality on the 50th operation as on the first.

60-Piece SAE and Metric Coverage for Repairing Damaged Threads and Cutting New Threads

This 60-piece set includes imperial sizes #4 through 1/2" and metric sizes M3 through M12, providing the user with a single kit that meets all typical threading requirements. The operator can match the appropriate pitch to the application without needing a separate set, thanks to the inclusion of both coarse- and fine-thread versions. This thorough coverage eliminates the expense and difficulty of having several tool kits cluttering the workshop.

The metric tap and die set is equally helpful for new builds and repair tasks, as it can be used to cut new threads and rethread damaged or stripped fasteners. While a fabricator creating unique brackets cuts clean threads into new stock, a mechanic working on a car restoration can chase corroded threads back to their original profile. A single kit handles both situations.

Four Supplementary Accessories for Precise Thread Starts and Enhanced Productivity

Along with the taps and dies, VEVOR includes a T-handle tap wrench, an adjustable die stock, a thread pitch gauge, and a flat-head screwdriver. From anchoring the die stock during external thread cutting to confirming the proper pitch before the operator commits to a cut, each auxiliary tool tackles a distinct threading difficulty. Having all of these tools in one set eliminates the need to look for relevant accessories separately.

By providing the operator with accurate torque control during internal thread cutting, the T-handle tap wrench lowers the possibility of tap breakage in blind holes. During repair chores, the thread pitch gauge saves time by quickly identifying the current thread pitch on fasteners or workpieces. When used in tandem, these accessories enable the operator to start threads precisely on the first try and maintain consistent thread quality throughout the task.

Metric Tap and Die Set with Multiple Metals for Adaptable Garage and Industrial Uses

This tap and die set cuts clean threads in carbon steel, cast iron, aluminum alloys, brass, copper, and stainless steel. The cutting edges are sufficiently accurate for softer non-ferrous materials like brass and copper, yet adequately hard to cut through hard ferrous metals thanks to the hardened steel construction. As a result, a single set includes all of the metals that a mechanic, fabricator, or maintenance specialist frequently works with.

The set is useful for residential garages, machine shops, light industrial facilities, and vehicle repair businesses due to its wide compatibility. Using the same equipment, a technician can re-tap aluminum engine parts in the afternoon after threading a stainless steel bracket in the morning. The metric tap and die set is a truly adaptable tool for a variety of work situations, as it handles material transitions without any modifications.

Lightweight PE Storage Case with Well-organized Compartments for Easy Transportation and Quick Access

With all 60 components and accessories included, VEVOR ships this set in a PE storage case weighing only 3.97 lbs (1.8 kg). A technician will not have to waste time searching through a loose pile of taps and dies thanks to the case's distinct sections that store each tool in a fixed, visible location. The size is clearly shown in each compartment, enabling the user to quickly pick up the appropriate piece and get back to work.

The full set is portable enough to travel between job sites without significantly increasing the weight of a tool bag, thanks to the small case dimensions of 12.40 x 7.87 x 1.77 in/315 x 200 x 45 mm. Additionally, the well-organized arrangement shields the tools from metal-on-metal contact that could chip their edges while in transit. The case ensures that every component is always ready for use, whether the kit is kept on a stationary workbench or is moved about every day.