VEVOR Deep Well Submersible Pump, 2HP/1500W 230V/50Hz, 9.8 m³/h Flow 108 m Head, with 9.1 m Electric Cord, Stainless Steel Water Pumps for Industrial, Irrigation & Home Use, IP68 Waterproof Grade

1500W Power and 108 m Head for Strong, Reliable Water Delivery

Extracting water from deep underground sources requires consistent mechanical power and exceptional pressure management. This unit is 1500W (2HP) and runs on standard AC 230V/50Hz. The power level enables steady transport of water up and out, even under the pressure of deep installations. Our submersible deep well pump can run continuously for extended periods.

The maximum head of 108 m (354 ft) is significantly outside the range of most ordinary pumps in its class. Such a lift can make water sources that would otherwise be unusable available. The G1.5 outlet provides a large, clear flow path. A 9.1 m power line is included so you can start without needing extra supplies. It's a capable package and ready to go from day one.

Submersible Deep Well Pump with 15-Stage Impellers for High Flow Output

High flow and steady pressure aren't accidents; they're the consequence of good engineering. This pump features a 15-step thermoplastic impeller design that builds pressure at each stage, reaching a maximum flow rate of 9.8 m³/h (43.15 GPM). That's enough volume for a large family, to operate a huge irrigation system, or to keep an industrial water operation running without interruption.

The multi-stage design implies that the pump can also handle the load. The work is distributed to each step of the impeller so that no one element is overloaded during operation. This deep-well submersible pump will continue to operate dependably at full capacity and under lighter loads. Ensuring a smooth and reliable flow you can depend on day after day, without the stress of pressure drops or inconsistent delivery.

Full Stainless Steel Body for Superior Corrosion and Rust Resistance

A submersible deep well pump that will spend its life underwater must be developed for that environment. This device goes further than others by making the entire frame from stainless steel, not just selected pieces, but the outlet and all connecting elements, too. All surfaces exposed to water need to be protected against rust and corrosion for long-term submersion, and we've got you covered.

This uniformity of material makes a genuine practical impact over time. Pumps made from mixed materials often develop weak points at junctions or connectors where different metals respond differently to water exposure. This design minimizes weak points. Throw in CE certification and a full IP68 waterproof rating, and you have a pump designed to stay in the ground and keep working for years without compromising the structure or causing unanticipated deterioration that needs attention.

Pure Copper Motor with Overheat Protection for Long-Lasting Performance

The motor in this submersible deep well pump features pure copper windings, which enhance its longevity. Copper is a better conductor than typical alternatives, so the motor runs cooler under load, loses less energy, and delivers more consistent power over longer use. It gives you a stronger water flow with less load on the system.

And beyond efficiency, the integrated overheat protection provides real peace of mind. If the motor temperature is too high or the pump runs under irregular conditions, it immediately shuts down to prevent damage. This feature is especially helpful during extended summer watering sessions or continuous overnight cycles when no one is monitoring the system attentively. Just remember, never run this pump dry, as dry running can cause catastrophic, permanent motor damage in a short time.

Built-In Check Valve and Filtration Mesh for Clean, Steady Water Flow

This pump works effectively at keeping the water clean and the system pressurized. Whenever the pump stops, a built-in check valve prevents backflow. Without it, water can flow back into the well, causing a loss of pressure and possibly bringing impurities back into the system. One less thing to install individually, one less potential point of failure to deal with.

The stainless steel filter mesh works in conjunction with the check valve to prevent debris and particles from entering the motor and internals. Fine sediment is normal in new wells during the first few weeks of operation; therefore, using gauze over the filtration inlet will protect it until the water clears. Both of these features work together to keep the system clean and prevent wear from particulate exposure, thereby prolonging the pump's service life.

VEVOR Submersible Deep Well Pump Ready for Industrial, Farm, and Home Use

One of the best things about this pump is the flexibility. It is suitable for a wide range of applications without any change or specific setup. Industrial water supply, farm irrigation, residential well systems, river pumping, canal water lifting, and reservoir pumping. This submersible deep well pump handles them all with equal reliability and consistent output.

The installation is simple, provided that one condition is met: the diameter of the well casing must be at least 10 mm larger than the pump body diameter. Other than that, the compact form fits nicely, and the provided cord gets you up and running quickly. This pump adjusts to you, whether you're the homeowner tired of erratic water supply, the farmer seeking continuous irrigation, or the operator controlling an industrial water process. It's meant to be a long-term cure, not a quick fix – and it works just like that.