VEVOR Benchtop pH Meter, 0-14 pH Range, Laboratory Tester Kit with Large Backlit Display, Calibration Solutions, Power Adapter, Stores Up to 50 Readings, for Temperature and Water Quality Testing

Benchtop pH Meter with 0-14 Range and 0.01 pH Resolution

Lab instruments demand precision, and this benchtop pH meter delivers. Reads the entire 0-14 pH spectrum with 0.01 pH resolution, allowing you to measure acidic and alkaline samples with the fine detail needed for lab work. That resolution can pick up small changes a less sensitive meter would miss, which matters when you need an accurate reading.

In addition to pH, it also measures temperature from 32-212°F or 0-100°C at 0.1°C resolution. Since temperature directly affects pH readings, measuring both together eliminates a common source of error. You get a complete picture of your sample in one pass instead of using two instruments. The combined precision meets the standards of serious work and won't make you question the numbers on the screen for research, water quality testing, or quality control.

1-to-3-Point Auto Calibration for Reliable Accuracy

A meter's accuracy depends on calibration, and this one makes it simple. It allows automatic or manual calibration across one to three points so that you can match the routine to your work's accuracy needs. For a quick check, a single-point calibration is sufficient; for demanding lab measurements, three points cover the full range.

The kit contains 50 mL of each of the following standard calibration solutions: pH 4.00, 7.00, and 10.01. The solutions are in the box, so you can calibrate on day one without looking elsewhere. Calibration against known standards helps maintain reading accuracy over time. The auto function takes the guesswork out of that step. That gives you results you can count on every time you sit down to test. Flexible calibration and solutions included.

50 Sets of GLP Data Storage for Full Traceability

Records are as important as the readings in a controlled setting, and this meter stores up to 50 sets of measurement data. Each stored set contains a record number, a measured value, a unit, a temperature, and a temperature compensation status. That level of detail means each entry is self-contained, not just a bare number without context.

This GLP-oriented data management ensures adequate traceability and quality control. If you ever need to refer back to previous results or record a series of tests, the saved records give you an easy, organized history. You don't have to rely on handwritten notes that might get lost or be misread. For labs with standards and audits, the built-in data storage makes the meter not only a measuring tool but a record-keeping tool, streamlining both your workflow and your reporting.

Composite Electrode for Simultaneous pH and Temperature

This unit has a combined electrode, a professional pH and temperature electrode, and measurements are taken at the electrode. The pH and temperature are measured simultaneously using a single probe. That simultaneous reading is more than a convenience; it allows the meter to apply proper temperature compensation while measuring.

The included 201T-F electrode delivers reproducible lab performance. Because it measures both together, your readings stay in sync. A pH value is only as accurate as the temperature at which it is measured. This design avoids the need for a separate temperature probe and the errors from mismatched readings. If you are testing general water or hydroponic solutions, the composite electrode will give you coordinated, reliable data that represents the true state of the sample in front of you.

Benchtop pH Meter with Large Backlit Display for Clear Reading

Readability affects accuracy more than you might think, and this benchtop pH meter takes care of that with a big backlit screen. The display shows pH and temperature at the same time so that you can see the full result at a glance. The backlight lets you read those figures in dim lab corners or poorly lit work areas where a plain screen would be hard to read.

A clear display reduces the chance of misreading values, a simple but real source of error in testing. You can see both numbers clearly, record them correctly, and move on. The stable benchtop design keeps the unit anchored on the bench as you read and work. The bright, spacious display, combined with the stable base, makes the meter easy to use over long testing periods without eye strain or mistakes.

Complete Kit with IP54 Rating for Lab and Field Use

A good instrument should be ready to work. The benchtop pH meter kit includes the main unit with an electrode holder, a DC 9V power adapter, a 201T-F electrode, and a user manual. This all-in-one package lets you set up and start testing without having to scavenge for missing accessories. The rugged benchtop design keeps everything steady during operation, making it ideal for both research and quality control environments.

The IP54 rating protects the unit from dust and light water splashes—a practical safeguard in a working lab. The meter is compact at 6.3 x 2.4 x 8.2 in and weighs only 2.7 lbs, yet stays firmly in place without crowding your bench. The durable ABS housing is designed to handle regular use over time. Together, these features make the meter a reliable, complete instrument for routine laboratory and water-testing work.