Download VEVOR App 
Exclusive 5,00€ off for your first three orders on the App.
Scan the QR code to download
Without the need for countertop pitchers, large dispensers, or expensive bottled water, VEVOR filtered water faucets provide clean, filtered drinking water straight from your kitchen sink. VEVOR offers a well-made, appropriately rated solution for any washbasin configuration and water quality need, whether you're installing a dedicated drinking water tap next to your main tap or replacing an existing tap with a filtered variant.
Are you sick of purchasing bottled water, changing pitcher filters, or using tap water that tastes like silt or chlorine? Via a special tap installed at your sink, VEVOR filtered water faucets provide clean, delicious water by connecting directly to your under-sink filtration system. Every option in this collection, from high-end multi-finish models for recently remodeled kitchens to small single-handle filtered drinking water faucets for apartments and rental kitchens, is made to install neatly, filter consistently, and look as nice as the rest of your kitchen hardware.
From a single individual filling a glass to a family filling numerous bottles and cooking containers throughout the day, VEVOR filtered water faucets are designed to work with the most popular under-sink filtration systems.
Sediment, chlorine taste and odor, and particulate matter that can make tap water appear hazy or unpleasant to drink are the most common household water quality issues addressed by single-stage filtration systems connected to a dedicated filtered water faucet. Depending on the cartridge rating, a single carbon block or sediment filter cartridge placed beneath the sink can remove particles as small as 0.5 to 5 microns, which is adequate to address the water-quality problems in the majority of treated municipal water supplies that bring residual chlorine and pipe sediment into the house.
Installing VEVOR filtered drinking water faucets for single-stage systems doesn't require specialized plumbing knowledge, as they use a simple intake connection that fastens directly to the filter output via a push-fit or compression fitting. At typical household water pressures, the flow rate from a single-stage system is 0.5 to 1.0 gallons per minute at the tap spout, filling a one-liter bottle in less than 30 seconds and a regular drinking glass in 3 to 4 seconds. A single-stage system combined with a VEVOR kitchen sink filtered water faucets offers a significant improvement over unfiltered tap water at the lowest system cost and with the least maintenance requirements for homes where taste and clarity are more important than the removal of dissolved contaminants like heavy metals or nitrates.
While delivering water that has been filtered to a much finer level than single-stage carbon systems, multi-stage filtration systems and reverse osmosis units require a tap that can handle the reduced flow rates and specific pressure characteristics these systems produce. Reverse osmosis systems remove dissolved solids, heavy metals, fluoride, nitrates, and a variety of contaminants that carbon filtration cannot remove by filtering water down to 0.0001 microns. The trade-off is that RO systems, which store filtered water in a pressurized tank beneath the sink and dispense it through the tap when needed, produce filtered water more slowly than single-stage systems.
The narrower flow channel and air-gap or non-air-gap drain connection configurations required for reverse osmosis and multi-stage systems are built into VEVOR filtered water faucets. An RO system's flow rate at the tap is typically between 0.25 and 0.5 gallons per minute, which is lower than that of a single-stage system but still adequate to fill glasses, bottles, and cooking containers without excessive delay. A multi-stage or RO-compatible VEVOR filtered drinking water tap with the proper under-sink system is the right specification for homes with proven concerns about heavy metals, nitrates, or high total dissolved solids in their water supply.
The speed at which a filtered water faucet fills containers during regular kitchen use is determined by its flow rate, which is expressed in gallons per minute. A flow rate of 0.5 GPM is more than sufficient for drinking water use in a single-occupant home or a couple, as the daily volume consumed from the filtered tap is small, and filling time is rarely a significant nuisance. A flow rate of 0.75 to 1.0 GPM minimizes the total time spent waiting at the tap for larger families of four or more people, who use the filtered tap for drinking water, cooking water, and food preparation throughout the day.
The standard household water pressure of 60 PSI, which is the typical supply pressure in most residential structures, is used to rate VEVOR kitchen sink filtered water faucets based on their flow rates. The actual flow at the tap will decrease proportionally if your household water pressure is below 60 PSI. Choosing a model rated at the higher end of the flow range compensates for the lower supply pressure. The condition of the filter cartridge also affects flow rate: a partially clogged cartridge nearing the end of its service life significantly reduces flow before water quality starts to deteriorate, serving as a useful reminder that the cartridge needs to be replaced before filtration performance declines.
Since mismatched metals and finishes in the same sink area give a visually inconsistent look that undermines an otherwise well-finished kitchen, a filtered drinking water tap installed next to a primary kitchen tap should complement the existing hardware finish rather than conflict with it. The most popular kitchen hardware finishes, chrome, brushed nickel, matte black, and oil-rubbed bronze, are offered by VEVOR filtered water faucets, encompassing the entire spectrum of finish families utilized in both modern and conventional kitchen designs.
Because water stains are less noticeable on a bright reflective surface than on brushed or matte finishes, chrome is the easiest finish to wipe clean and works well in modern and transitional kitchens with polished metal cabinet hardware and faucets. For kitchens that use a combination of cool and warm metal tones, brushed nickel is the most neutral option, as its soft, diffused surface reflects both without looking out of place next to either. Matte black goes well with black cabinet pulls, dark worktops, and undermount sinks with black drain hardware in modern kitchen designs where the hardware palette is purposefully dark and graphic. Because of VEVOR's variety of finishes, you can choose filtered water faucets that look like they were included in the original kitchen design rather than an afterthought.
VEVOR filtered water faucets feature filter cartridges with service lives that reduce the frequency and cost of ongoing maintenance, and they are designed for simple do-it-yourself installation.
The typical 1-3/8-inch sink deck hole used to mount VEVOR filtered drinking water faucets has the same diameter as the pre-drilled auxiliary holes next to the main faucet position on most kitchen sinks. The same hole size may be drilled through porcelain, composite, and stainless steel sinks without a pre-drilled hole using the proper step bit or hole saw. It is a common do-it-yourself project that doesn't call for a plumber. The mounting hardware fastens from underneath the sink with a single lock nut that may be tightened manually or with a basin wrench in small under-sink spaces. The tap body descends through the deck hole from above.
A conventional 1/4-inch push-fit or compression-fitting inlet is used for the water-supply connection on VEVOR kitchen sink filtered water faucets. This inlet attaches directly to the RO tank delivery tube or the outlet port of the under-sink filter housing. The connection doesn't require soldering, thread-sealing tape, or specialty fittings, and if a novice installer follows the given instructions, the full installation, from unpacking to the first water draw, usually takes 20 to 40 minutes. VEVOR filtered water faucets are a useful upgrade or replacement for an existing system, as well as a new installation component, since they work with filter housings and RO systems from the most popular under-sink filtration brands.
The frequency of filter cartridge replacement and the cost of the replacement cartridge are the main factors influencing the continuous cost of filtered water faucets. Depending on the cartridge type and filtration stage, VEVOR filtered water faucets systems use cartridges rated for 500 to 2000 gallons of filtered water. Depending on daily consumption and incoming water quality, a typical household would need to replace these cartridges every six months to two years. Since sediment loading rather than volume is frequently the limiting factor on cartridge service life, households with greater sediment loads in their incoming water will exhaust cartridge capacity more quickly than those on a clean municipal supply.
One of the most accessible replacement consumables in the home filtration market is carbon block cartridges used in single-stage VEVOR sink filtered water faucets systems. Because of their low unit cost, the annual maintenance expenses of a filtered faucet system are competitive with the ongoing costs of bottled water or countertop pitcher filter replacements. When the higher filtration quality is considered, RO membrane cartridges used in multi-stage systems have a longer service life of one to three years but a higher unit replacement cost. This results in an average annual cost per gallon of filtered water that is either the same or lower than that of single-stage systems. Each tap and system comes with precise cartridge replacement specs from VEVOR, making the cost of ongoing maintenance clear before purchase.
From straightforward single-stage chlorine removal to complete reverse osmosis compatibility, VEVOR filtered water faucets meet every filtration type, flow rate, finish, and installation scenario a homeowner or renter would require. VEVOR is the sensible option for anyone who wants clean, delicious drinking water straight from the sink, thanks to its simple DIY installation, extended cartridge service life, and finish selection that complements any kitchen hardware palette. Explore the entire selection of VEVOR filtered water faucets now to improve the quality of your kitchen water with just one easy addition.
The common 1/4-inch push-fit inlet used to connect the majority of VEVOR filtered drinking water faucets is compatible with the output ports of most under-sink filter housings and reverse osmosis systems. Before placing an order, make sure the product is compatible with your current system by looking at the relevant product listing.
Depending on the type of cartridge and the amount of water used in the home, replacement intervals may range from 6 months to 2 years. The majority of single-stage carbon cartridges have a 500–1000-gallon rating. The first obvious indication that a new cartridge is needed is typically a discernible decrease in the faucet's flow rate.
Yes. A basin wrench for the lock nut, a push-fit connection to the filter outlet, and a standard 1-3/8-inch deck hole in the sink are needed for installation. Without specialized plumbing knowledge, most installs take 20 to 40 minutes. VEVOR filtered water faucets come with comprehensive installation instructions.
Instead of matching the precise hue, match the finish family: matte black with black hardware, oil-rubbed bronze with warm-toned metal finishes, brushed nickel with brushed nickel or stainless, and chrome with chrome. Compared to a finish family mismatch, minor shade variations between brands are common and less obvious.
