High Bay Lights
Results for High Bay Lights
A high bay LED light is an overhead luminaire built to push a usable level of light down to the floor from a tall ceiling, where ordinary fixtures mounted that high would leave the ground dim. A single unit combines an array of light-emitting diodes, a driver that converts mains power to the current the diodes need, a reflector or lens that shapes the beam, and a finned metal body that carries heat away from the diodes. It hangs from a hook, chain or bracket rather than sitting in a ceiling grid, and it replaces the gas-discharge lamps once used for the same job.
The range here splits into two families. Bay lights are round UFO-style high bay fixtures from 150W to 250W, each putting out 21,000 to 36,000 lumens at 5000K or 6000K, rated IP65 and running on 100 to 277V, sold in packs of 4, 6, 10 and 20. Alongside them sit stage effects units: fireworks controllers and cold spark machines from 500W to 700W with DMX control and adjustable spark height, grouped under the broader commercial lighting selection. Typical uses are lighting warehouses, workshops, factories, gyms and garages from the roof, and producing spark effects for stage, DJ and wedding events.
Four things decide what you need:
- Mounting height: match the fixture to how high the ceiling is, since a 150W unit is rated for 15 to 18 ft while a 250W unit is rated for 28 to 35 ft.
- Light output: allow more lumens as the ceiling rises, because light spreads and weakens over the longer drop to the floor.
- Pack size: count the fixtures the span needs, then buy the 4, 6, 10 or 20 pack that covers it in one order.
- Color temperature: 5000K reads as natural daylight white, while 6000K is a cooler, bluer white for a starker look.
Browse the full high bay lights range to match output to ceiling height, or step up to the wider lighting category.
High Bay LED Light Types at a Glance
| Type | Output | Mounting Height | Control | Best For |
|---|---|---|---|---|
| 150W bay light | 21,000 lm | 15 to 18 ft | On/off via 7 ft cord | Shops, garages and bays with low ceilings |
| 200W bay light | 30,000 lm | 20 to 26 ft | On/off via 7 ft cord | Workshops and mid-height warehouses |
| 250W bay light | 36,000 lm | 28 to 35 ft | On/off via 7 ft cord | Tall warehouse and factory ceilings |
| Cold spark machine | 500W or 700W, 6.6 to 16.4 ft spark | Floor-standing | DMX and remote | Indoor stage, DJ and wedding spark effects |
| Fireworks controller | Multi-channel firing | Floor or console | DMX with LED screen | Sequenced firing of several effect units |
VEVOR Stage and Lighting Equipment for Venues, Events, and Commercial Facilities
Are you searching for a well-organized lineup of stage and lighting equipment that includes production control systems, professional event effects, and robust facility lighting? For event planners, venue managers, and facility operators, VEVOR offers high-bay LED lights, cold spark machines, and fireworks controllers. Find the appropriate control format, output specification, and equipment type for your application right now.
Stage and Lighting Equipment Types and the Applications Each One Serves
Within a single product portfolio, stage and lighting equipment covers two different application categories: dramatic effects equipment for live events, shows, and productions, and high-output overhead facility illumination for commercial and industrial locations. VEVOR offers items designed for professional performance in both categories.
High Bay LED Lights for Industrial and Commercial Facility Illumination
When standard commercial light fixtures cannot project enough light intensity to the floor level without the excessive fixture density that results in prohibitive installation and energy costs, high bay LED lights are the standard overhead illumination solution for warehouses, manufacturing facilities, sports halls, large retail spaces, and any interior environment with ceiling heights above 15 feet. When installed at heights where light intensity decreases significantly with distance from the source, VEVOR high bay LED lights deliver the high lumen output needed to meet minimum illumination levels for warehouse picking operations, manufacturing quality control, and sports facility use.
Compared to the metal halide and fluorescent high bay fixtures that industrial facilities have traditionally used, the LED technology in VEVOR high bay LED lights offers significantly higher energy efficiency. It uses 40-60% less electricity for the same lumen output. It eliminates the lengthy warm-up and restrike delay that metal halide fixtures impose when lights are turned on after a cooling period. VEVOR LED high bay lights provide the energy savings of motion-controlled lighting without the warm-up period that made sensor control with metal halide alternatives impractical. They are compatible with occupancy sensor and daylight harvesting control systems, which turn lights off when areas are unoccupied and back on when activity is detected.
LED High Bay Lights and Bay Lights for Varied Ceiling Height Applications
With various optical distributions and wattage specifications matched to each height range, LED high bay lights and bay lights cover ceiling height applications from the standard high bay range above 20 feet to lower bay applications between 12 and 20 feet. This feature enables efficient delivery of target floor illumination levels without over-specification, which wastes energy, or under-specification, which leaves the space inadequately lit for safe and productive operation. Certain models of VEVOR LED high bay lights have interchangeable reflector and lens options that enable the light distribution pattern to be set up for either narrow beam projection down aisles between racking, where concentrated illumination is more effective than a wide distribution that wastes output in areas blocked by the racking structure, or wide flood coverage of open floor areas.
The finned aluminum heat-sink housings used for thermal management in VEVOR LED high bay lights effectively dissipate the operating heat generated by the LED drivers and chips, keeping the LED junction temperature within the operating range that maintains the light output depreciation timeline, which forms the basis of the manufacturer's lumen maintenance specification. The main commercial rationale for LED high bay lighting conversion projects in existing industrial and commercial facilities is the total cost of ownership advantage over metal halide, but inadequate heat dissipation in poorly designed LED high bay fixtures results in premature lumen depreciation and shortened driver life.
Cold Spark Machines for Safe Indoor Event Effects
While operating at a temperature low enough to be safe for indoor use, near performers and audiences, and locations where fire safety regulations or insurance requirements forbid open-flame pyrotechnics, a cold spark machine creates a spectacular fountain of sparkling, glowing particles that visually resembles a pyrotechnic spark effect. Under typical operating conditions, VEVOR cold spark machines use a titanium or zirconium granule fed through a heated grinding mechanism to produce sparks that glow visibly but remain at a surface temperature low enough to contact skin and combustible materials like fabric, wood, and carpet without igniting them.
From small indoor events where a one to two-meter fountain fits the venue scale to large stage productions where maximum height creates the dramatic visual punctuation for key performance moments, VEVOR cold spark machine models with adjustable spark height enable the visual scale of the effect to be calibrated to the ceiling height, stage size, and visual impact requirement of each particular performance. The event lighting and effects console operator can integrate the spark effect into the complete production control workflow that professional event production demands by using remote DMX control compatibility on VEVOR cold spark machines to trigger each machine and adjust spark height as part of a programmed show sequence without manually operating each machine at its position.
Fireworks Controllers for Professional Display Management
In a professional fireworks display or theatrical pyrotechnic production, a fireworks controller provides the electrical firing and sequencing interface that links to pyrotechnic effects and controls their ignition timing, sequence, and safety interlocking. The multi-channel design of VEVOR fireworks controllers enables individual pyrotechnic cues to be assigned to particular controller channels and fired in a programmed sequence, simultaneously, or in any combination required by the display choreography. This precise timing control transforms a random fireworks display into a synchronized visual performance that aligns with music or narrative.
Arm-and-fire dual-action firing sequences that prevent unintentional discharge during system setup and testing, continuity testing functions that confirm electrical connection to each pyrotechnic cue before the start of the display, and emergency abort functions that cut all firing signals simultaneously in the event of a safety incident requiring an immediate production stop are examples of safety interlock features on VEVOR fireworks controllers. A VEVOR fireworks controller offers the channel capacity, safety features, and operational dependability that professional display management requires for pyrotechnicians, theatrical effects technicians, and licensed display operators who need precise, dependable firing control from a system that satisfies professional safety standards.
Choosing High Bay LED Lights by Ceiling Height and Use
Use the table below to map a space to the fixture or effect unit that suits it, with the single factor that matters most for each case.
| Space or Use | Priority Pick | Key Consideration | Why It Fits |
|---|---|---|---|
| Low shop or garage, 15 to 18 ft | 150W bay light, 21,000 lm | Mounting height | Rated for the shorter drop, so output is not wasted above a low ceiling |
| Workshop or warehouse, 20 to 26 ft | 200W bay light, 30,000 lm | Light reach | Extra lumens carry the longer distance to the floor without going dim |
| Tall factory or warehouse, 28 to 35 ft | 250W bay light, 36,000 lm | Peak output | Highest lumen figure holds floor brightness from the greatest height |
| Cooler, starker light wanted | 6000K 150W bay light | Color temperature | 6000K reads bluer than 5000K where a crisp white is preferred |
| Indoor stage or wedding effect | 500W to 700W cold spark machine | Spark height | Adjustable 6.6 to 16.4 ft fountain scales to the venue without open flame |
Features and Control Options Across VEVOR Stage and Lighting Equipment
Stage and lighting equipment features and control integration affect operational flexibility, energy efficiency, and how well each product integrates into a professional production or facility management workflow.
Dimming, Sensor, and Smart Control Features for High Bay Lighting
VEVOR high bay LED lights' control features go beyond basic on/off illumination to include active energy management technologies that lower operating expenses during the installation's lifetime. When maximum illumination is not required, such as during reduced-activity warehouse zones, early morning restocking before full staff arrival, or end-of-day facility wind-down periods where full lighting levels consume energy without improving productivity, dimmable driver options on VEVOR LED high bay lights enable light output to be reduced from full brightness to a lower level.
To provide the energy savings of automated lighting management in a fixture format compatible with the current control infrastructure of the majority of commercial and industrial building management systems, VEVOR LED high bay light drivers with 0–10V dimming capability connect to standard building management system dimming controls and occupancy sensors that automate light level adjustment based on occupancy detection and daylight availability. By lowering the total wiring length and connection count needed to supply a row of fixtures from a single circuit feed point, daisy-chain wiring options for VEVOR high bay LED light models facilitate installation across lengthy fixture runs in warehouse and industrial applications.
DMX Control, Wireless Triggering, and Production Integration
These effects devices can be integrated directly into professional lighting and effects control consoles that oversee all production elements from a single operator station, thanks to DMX control compatibility between VEVOR cold spark machines and fireworks controllers. This feature gives professional event production the coordinated timing and programmed sequence control needed for intricate multi-element shows. Using a straightforward channel-assignment procedure, DMX addressing on VEVOR cold spark machines assigns each machine a distinct address within the DMX universe. This feature enables the console operator to control each machine separately or to group several machines for simultaneous, synchronized triggering at critical points in the production sequence.
Without the cable runs that wired DMX requires between the control position and each effect unit, wireless remote control options on certain VEVOR stage effects equipment offer the operational flexibility to trigger effects from any position in the venue. This feature reduces setup complexity and increases the flexibility of effect placement across stages, catwalks, and audience areas where cable routing would create trip hazards or limit the production designer's positioning options.
Best-Seller Comparison
Here is how five of the high bay LED lights on this page, compare side by side.
| Product | Power | Output per Fixture | Color Temp | Pack | Mounting Height | Best For |
|---|---|---|---|---|---|---|
| 20-Pack 150W 21000LM | 150W | 21,000 lm | 5000K | 20 pcs | 15 to 18 ft | Largest pack here; kitting out a whole low-ceiling shop in one order |
| 6-Pack 250W 36000LM | 250W | 36,000 lm | 5000K | 6 pcs | 28 to 35 ft | Brightest fixture here; the tallest warehouse and factory ceilings |
| 6-Pack 150W 21000LM | 150W | 21,000 lm | 5000K | 6 pcs | 15 to 18 ft | Lowest wattage in the five; small bays and single-shop fit-outs |
| 6-Pack 200W 30000LM | 200W | 30,000 lm | 5000K | 6 pcs | 20 to 26 ft | Mid-height pick; workshops between the 150W and 250W ranges |
| 10-Pack 200W 30000LM | 200W | 30,000 lm | 5000K | 10 pcs | 20 to 26 ft | Same 200W fixture in a larger pack for bigger mid-height spans |
Why Choose VEVOR Stage and Lighting Equipment?
For commercial buildings, event spaces, and professional production settings, VEVOR offers a full spectrum of stage and lighting equipment, including high-bay LED lights, bay lights, cold spark machines, and fireworks controllers. Every product offers affordable pricing, useful control integration, and dependable performance, helping make professional lighting and effects equipment accessible across a wide range of budgets. Your equipment is prepared for every event and every facility thanks to VEVOR's dependable after-sales assistance. Look over the entire selection now.
FAQs
What wattage high bay LED light do I need for a 25-foot warehouse ceiling?
A 150W to 200W VEVOR LED high bay lamp can typically provide a roughly 20 to 50 foot-candle lighting level needed for regular industrial work and warehouse picking on a 25-foot ceiling. Before choosing a fixture, always use a photometric plan to determine the quantity and spacing of fixtures depending on your goal illumination level and floor area.
How many high bay LED lights do I need?
Divide your target light level by the output each fixture delivers at your ceiling height, then adjust for spacing and fixture overlap. As a rough start, one 200W high bay fixture covers a sizeable bay, but a photometric plan gives the exact count.
How do I dim LED high bay lights?
Use fixtures with a dimmable driver and connect them to a compatible 0 to 10V control or occupancy sensor. VEVOR dimmable-driver models let output drop from full brightness to a lower level during quiet periods, so always confirm the driver supports dimming before wiring in a controller.
How do I choose the right high bay LED lights for my industrial space?
Match wattage and lumen output to your ceiling height and task brightness, then pick a color temperature and pack size that fit the floor plan. Taller bays and detail work point toward 250W fixtures, while moderate heights are well served by 150W units.
Are high bay LED lights energy-efficient compared to traditional lighting?
Yes, LED high bay fixtures draw far less power than metal halide or fluorescent fixtures for the same brightness, cutting energy use substantially. They also switch on instantly with no warm-up, last longer, and pair with sensors and dimming so you only run full output when the space actually needs it.
How do I wire high bay LED lights?
Connect line, neutral, and ground to the fixture leads within its 100 to 277V input range, matching your supply voltage. Many VEVOR LED high bay models support daisy-chain runs from one circuit. Always cut power first and have a qualified electrician handle permanent installs.
What are the best high bay LED lights?
The best fixture is the one matched to your space. For bright, large-area coverage, high-output UFO high bay lights with an IP65 rating and wide 100 to 277V input are a strong choice. Pick wattage by ceiling height and the pack size that fits your layout.
Are cold spark machines safe to use near performers and audiences?
Yes, VEVOR cold spark generators are appropriate for indoor locations where open-flame pyrotechnics are forbidden since they generate sparks at temperatures low enough for safe use in proximity to artists and audiences under typical operating conditions. When using effects equipment in occupied venues, always adhere to local event safety requirements and manufacturer operating recommendations.
Can VEVOR fireworks controllers be used for theatrical stage pyrotechnics?
Indeed, the multi-channel firing, safety interlocking, and continuity-testing capabilities that professional effects technicians need for dependable, safe production firing make VEVOR fireworks controllers suitable for both indoor theatrical pyrotechnic applications and outdoor displays. The use of pyrotechnic devices in any application must always comply with local licensing laws.
Do VEVOR high bay LED lights work with occupancy sensors?
Indeed, standard occupancy sensors and building management system controls that lower light levels in unoccupied areas and restore full output when activity is detected are compatible with VEVOR LED high bay lights with 0–10V dimmable drivers, providing the energy savings of automated lighting control across warehouse and industrial facility installations.