VEVOR carries a wide selection of magnetic sweepers designed for use on construction sites, in workshops, in warehouses, and in farm yards. Push models range from 15 to 36 inches wide. Forklift-mounted units are best for big lots, and handheld pickup tools are best for tight corners. All models feature powder-coated steel bodies, quick-release debris levers, adjustable handle heights, and rubber-tired wheels. With each shift, you can sweep a whole loading yard or clear nails from a driveway. This range offers widths and mounting styles to fit your needs.
Are you sick of finding flat tires, worn-out boots, and unwanted steel pieces all over a finished project? After several passes, a broom and gloves cannot fully clean up the mess left by a cleaner. VEVOR designs these units to work in real-world conditions, including dirt, mud, uneven concrete, and long shifts. First, choose the sweeping width and mounting type. Then, match the magnet's strength and features to the type of trash you need to remove.
Your choice of sweeping width and mounting style will determine how fast you clear the ground. If you do them right, cleanup will not be a job that anyone wants.
It is best to use a 15 inch magnetic sweeper for garages, machine shops, and private driveways with limited turning space. At a walking pace, it clears about 500 square meters an hour. Either the 17 inch magnetic sweeper or 18 inch magnetic sweeper will do the job, but the 17-inch unit will cover a little more ground with each pass. As long as these widths don't lift, they can go through normal doorways and between rack aisles, which matters more than speed inside.
Most small units weigh between 8 and 14 kg, which is not too heavy for one person to move into a truck bed. The 90–120 cm telescoping handles allow different people to work in a relaxed position without stooping. This size is perfect for occasional cleanup, like sweeping a workshop once a week or cleaning up your garage after a project. For shelves, engine bays, and floor spots that wheels can not reach, pair one with a magnetic pickup tool. This way, you can handle almost any situation that comes up on a small site.
If you often clean parking lots, roofing job sites, or fabrication floors, you should get a 24 inch magnetic sweeper. Compared to an 18-inch unit, the extra width cuts passes by about a third, which adds up quickly over a big area. The widest common push size is the 36 inch magnetic sweeper, and you can find them on construction sites, event grounds, and after demolition cleanup. The unit needs fairly flat ground and weighs at least 25 kg. It can clear well over 1,000 square meters an hour.
When wheels are this big, quality matters as much as width. Rubber or pneumatic tires with a diameter of 15 to 20 cm can go over gravel and expansion joints. Small, hard castors, by contrast, get stuck and skip. A rolling magnetic sweeper with an adjustable magnet height lets you set the clearance to match the surface's roughness. A good unit will have release methods that separate it from a frustrating one. A lever that drops trash into a bin without touching it saves real time and gloves on a job site that makes buckets of nails every shift.
When you drive fast, a forklift magnet sweeper can clear big yards by attaching to standard fork pockets. For places like steel fabrication plants, junkyards, and distribution centers, this is the only practical way to cover the wide area. Most mounting widths range from 36 to 72 inches. Adjustable fork pocket brackets should fit wagons with 500 to 900 mm spacing, and a chain or cable release should let the driver empty the basket without getting off the seat.
Pull-behind models connect to a tractor, ATV, or truck and work well on farm lanes and long access roads. Ground clearance matters because a magnet set too low will catch on ruts, and a magnet set too high will miss flat objects. No matter which mount you pick, do not go too fast. At speeds above about 8 km/h, a magnet roller starts skipping smaller items like screws, staples, and washers, even though its pull force is more than enough to do the job.
Most buyers choose a push type magnetic sweeper because it offers a good balance between coverage, cost, and storage. Only one person needs to clear a spot, and the unit hangs on the wall between uses. Handheld tools work with it, not instead of it. An extendable magnetic pickup tool can retrieve lost bolts from engine bays, drain channels, and behind machinery, which isn't possible with a wheeled unit. Most of them are 15 to 60 cm long and can lift 2 to 10 kg.
Also consider your surface. Rolling units work best on hard, mostly level ground. A magnet sweeper hanging from a car bumper often works better than wheels on thick grass, deep gravel, or churned mud because it floats over bumps rather than bouncing. Many workers keep a wide push unit for the main area and a small handheld unit for small jobs. That setup cleans the spot better than either one alone, and the handheld tool doesn't cost much.
More than size and placement, a sweeper's pickup ability depends on the magnets' material and workmanship. Before you buy, you should pay close attention to these details.
Most cheap units use ceramic ferrite magnets, which are long-lasting, heat-resistant, and strong enough to hold nails, screws, and other small pieces lying on the surface. Ten to twenty-five kg of pull force per unit is the norm. Neodymium magnets are more expensive but produce much stronger fields, up to 40 kg or more.
With neodymium, the strongest magnetic sweeper options can pull waste from gravel, grass thatch, and shallow mud, not just from smooth surfaces. Sweep height is the key measurement to check. This is the distance at which the magnet can still lift a normal nail. If it is less than 2.5 cm, you can only use clean, hard ground. Anything above 5 cm is strong.
Powder-coated steel housings are much more durable than painted sheet or plastic shrouds against rust and impact. Make sure that the magnet bar is completely covered. Exposed magnets can break when they hit curbs.
Prioritize quick-release levers. Scraping a full floor magnetic sweeper by hand takes a long time and can cause cuts from wire ends and torn lights. Maintenance is still necessary. After each use, wipe the face clean. Make sure the wheel bearings are clean, and keep the unit away from electronics and hard drives when you are not using it. With proper care, magnet-on-wheels units can maintain their pull for ten years.
There are 15, 17, 18, 24, and 36-inch push models, forklift-mounted units, and handheld pickup tools from VEVOR, so you can choose the right sweeper for your spot without having to make any sacrifices. Each magnetic rolling sweeper is made of powder-coated steel and features strong magnet systems, plus direct-to-consumer pricing lower than industrial supply catalogs. With quick after-sales customer service and easy returns, equipping your crew carries little risk. Looking at VEVOR magnetic sweepers right now will help you finish every job with a clean place.
Choose a width that fits your space. A 15- to 18-inch unit is fine for areas less than 200 square meters. Pick 24 to 36 inches for parking spots and building sites. If you have more than an acre, consider a model mounted on a forklift.
Stronger neodymium models can, to a certain depth. Usually, ferrite units can only move surface debris. Check the claimed sweep height; anything above 5 cm should handle loose gravel pretty well.
Most of them have a release lever that drops the trash into a bin all at once. If the machine does not have a lever, scrape the face with a stick or a gloved hand instead of your bare fingers.
No, magnets can only pull steel and iron together. Aluminum cans, copper scraps, and most types of stainless steel remain on the ground and need to be swept up as usual.
Not really. Under regular use, permanent magnets lose about 1% of their strength every ten years. Too much heat and impact cause far more damage than age alone.
