VEVOR PCP Air Compressor, 350W 2700 RPM Portable Diving Compressor, 4500 Psi High Pressure with 8 mm Quick Connector & Built-in Cooling Fan, 1.5L Tank Auto-shutoff Design Powered by Home & Car Battery

Air Compressor for PCP Airguns with Adjustable Pressure and Auto-Stop

You can set your target pressure on this air compressor for PCP airguns and then let it do the rest. It has an adjustable pressure gauge and a visible temperature display. After reaching the set pressure, the unit shuts off automatically, helping prevent overfilling and letting you avoid watching the gauge the whole time it is filling.

This feature makes it easy to track the compressor's temperature during a fill, thanks to an LED temperature display. This air compressor has a maximum pressure of 4500 PSI (300 Bar) and an inflation rate of 2700 R/min. It is suitable for PCP air rifles, paintball tanks, and other high-pressure tools, whether you are filling one tank at a time or several at once.

Dual Power Source for Home or Car Battery Operation

You can plug this portable PCP compressor into a 110V or 220V wall outlet at home, or use a 12V car battery when you're outside, so you can fill up your tanks wherever you are. The power source does not matter where you are, at a range, in the field, or in your garage, and switching between the two is easy and requires no extra tools. This feature means that the compressor is truly portable and not limited to a single setting.

You can use tanks up to 0.4 Gal (1.5 L). It takes 18 minutes to fill from 0 to 300 Bar, but only 5 minutes to fill from 200 to 300 Bar. The 4.9-foot car power line that comes with it makes outdoor setup easy and requires no extra cables. This feature is especially helpful for people who fill up their tanks at the range or away from a wall outlet, where getting power can be a problem.

Built-In Cooling Fan for Oil and Water-Free Operation

Unlike water-cooled compressors that need extra water tanks, this air compressor for PCP airguns cools itself with a built-in fan, so it does not need any extra oil or water. There is also a built-in power converter, so there is no need to handle a separate adapter. This feature makes setup easy for first-time users who want a simple, low-maintenance fill solution without having to track down or replace extra parts.

You can control the cooling fan manually. If the temperature rises above 70°C (158°F), turn off the compressor but leave the fan running to lower the temperature safely. For continued use, especially during longer fill sessions or back-to-back tank refills, this manual cooling step helps prevent internal components from overheating and wearing out.

Built-In Oil/Water Separator for Clean, Dry Air Output

You can use it over and over again without worrying about the air quality getting worse because it has a built-in oil/water separator and an activated carbon separator on the hose that filters out both oil and water from the air supply. This set of filters helps ensure that every fill-up delivers clean, dry, high-pressure air. This feature reduces the chance that contaminants will reach your tank or gun over time.

The inflation nozzle has an 8mm quick connector and a copper nozzle, making it easy to connect and disconnect between fills. This feature lets you quickly switch between tanks or guns without dealing with leaks or slow-to-connect fittings. This feature saves time when you are filling a lot of gear at once, like when you are going through a list of tanks before leaving.

Multiple Safety Features for Secure High-Pressure Filling

The adjustable pressure gauge, bleed valve, burst disc, and fuse in this compressor provide many safety features during operation. When used together, these safety features reduce the risk of overpressurization or equipment failure, which gives people new to high-pressure filling equipment greater confidence.

The unit is easy to move and store because it has a wire spool and a portable handgrip that keep the power cord organized and stop it from getting tangled. The compressor is perfect for use at home or while traveling because it has safety features and is small enough to take with you. You can store it between sessions or keep it ready in your car.

Air Compressor for PCP Airguns Across Multiple Applications

This air compressor for PCP airguns works with paintball tanks, air pistols, PCP air guns, and mini diving bottles. This feature makes it a good choice for people who work with many different kinds of high-pressure tools. Its small size does not limit its uses, and it can easily switch between different filling tasks without requiring separate tools.

The unit is light (19.8 pounds) and small (13.4 x 6.7 x 10.2 inches), so it is easy to carry and store, whether you are going to the range or just want to keep it at home. It is small and portable, with two power options and an auto-stop feature that makes refilling easy wherever you need it. This feature means you only need one tool for a variety of high-pressure filling tasks, rather than several different tools.