Select the country/region, language, and currency you prefer for shopping.

Pump Kits

Price
30 ~ 50
50 ~ 100
100 ~ 200
Customer Rating
5 stars only
4 stars and up
3 stars and up
2 stars and up
1 star and up
Special Offers
On Sale
Bulk Savings
In Stock
Pickup
Black Friday
New
VEVOR Discharge Hose 2" x 15.2 m PVC Lay Flat Backwash Water Pump Pool Hose, for Swimming Pool Sand Filter & Sump Pump, Water Transfer Drainage, Weather & Burst-Resistant, with Pin Lug Fittings, Blue
(8)
48.99
48.99
Deal after registering
Member discounted price
0% cash back at checkout.
48.99
Non-PRO Account
48.99
Save
Non-PRO Account
214 Views Recently
You May Also Like
Recently Viewed

Results for  Pump Kits

A water pump hose is a flexible pipe that carries water to and from a pump. On the intake side it draws water from a source such as a pool, pond, or flooded area into the pump, and on the outlet side it carries the pumped water to a drain, tank, or other discharge point. Hoses for pumps are built to hold their shape under suction, resist pressure, and connect to the pump with matching fittings. The right hose keeps flow steady, avoids leaks and collapse, and protects the pump from strain.


Water pump hoses are grouped by the side of the pump they serve. Suction hoses in 2 inch and 3 inch diameters are 20 feet long with rigid PVC walls. Backwash and discharge hoses run from 1-1/2 to 2 inches in lengths of 50 to 100 feet, in lay-flat or braided PVC. Suction hose kits bundle a suction hose, a discharge hose, a strainer, and clamps. Browse the pump kits. Typical uses are pool draining and backwash, flooded area drainage, irrigation top-ups, and site dewatering.


Four things decide what you need:


  • Diameter: match the hose bore to the pump inlet and outlet ports to avoid choking the flow.
  • Hose role: suction hoses need rigid walls, while discharge and backwash hoses can be lighter and flat.
  • Length: keep the suction run short, and size the discharge run to reach the drain.
  • Connections: check for camlock, cam and groove, pin lug, or NPT fittings that fit your pump.

See more Pump Accessories, or browse the full Water Pumps range.


Water Pump Hose Types at a Glance


Pump hoses separate by the pump they pair with, the side of the pump they serve, and the jobs they handle, so the table sets those factors side by side.


Hose Type Pump Pairing Flow Role Typical Job Trade-offs
2 inch suction hose 1.5 to 3 HP trash and transfer pumps Draws water into the pump Pool draining, yard and basement water Flexible and easy to connect, but limited flow
3 inch suction hose Pumps of 5 HP and above Draws water into the pump Pond transfer, dewatering, irrigation Higher throughput, but needs strong reinforcement
Pool backwash hose Pool filter backwash port Carries wastewater out Filter backwash to a drain Light and long, but not for suction
Suction hose kit Pump inlet and outlet sets Both sides of the pump New pump setups and replacements Fits as a set, but each size is fixed

VEVOR Water Pump Hoses for Suction, Discharge, and Pool Backwash Applications


Do you need a hose that can meet your pump's needs? The proper hose is essential whether you are carrying water across a construction site, backwashing a pool filter, or draining a flooded basement. VEVOR water pump hoses, available in standard diameters, flexible materials, and operating lengths suitable for both portable and stationary pump sets, are designed for real-world use.


Choosing Water Pump Hoses by Diameter and Application Type


Every pumping task is different, and the hose diameter directly affects the volume and speed of water flow. Knowing how diameter and application relate to one another saves time, stops pressure loss, and shields your pump from strain.


When to Use a 2 Inch Suction Hose


For light to medium-duty pumping jobs when mobility is just as important as performance, a 2 inch suction hose is the preferred option. Draining swimming pools, clearing standing water from yards or basements after a significant downpour, and irrigation top-ups on smaller plots are typical uses. It is simple to connect to mid-range centrifugal pumps without the need for heavy-duty connections or adapters, as the 2-inch diameter strikes a balance between reasonable flexibility and sufficient flow volume.


A 2 inch suction hose works well with 1.5 HP to 3 HP trash pumps and water transfer pumps for do-it-yourselfers and homeowners. When draining pools or clearing flooded garden beds, the bore size is crucial because it allows debris-laden water to pass through without clogging during normal use.


To avoid kinking under suction pressure, especially when running longer lengths, look for hoses with a reinforced spiral design. The pre-fitted couplings that come with VEVOR's 2-inch options make attachment easier and reduce connection time on the construction site. The most economical option in any pump hose kit for consumers handling seasonal water transfer activities is a high-quality 2-inch hose.


Heavy-Duty Jobs That Call for a 3 Inch Suction Hose


A 3 inch suction hose is required when flow volume is the primary consideration. Large pond transfers, municipal drainage operations, agricultural irrigation, and construction site dewatering all require higher throughput than a 2-inch hose can consistently supply. Your pump can run more effectively for longer periods because the larger bore lowers velocity at equivalent flow rates, reducing friction losses.


Gasoline or diesel pumps with five horsepower or more are usually used in conjunction with a three-inch suction hose. To prevent collapse under negative inlet pressure, the hose at this diameter needs to be strengthened; check for steel spiral or wire-helix reinforcement incorporated in the rubber or PVC wall. To provide structural stability throughout the entire working length without adding undue weight, VEVOR designed its 3-inch suction hoses with this goal in mind.


The 3-inch option significantly reduces the time required to move large quantities for contractors managing project sites with ongoing groundwater intrusion or for farmers transferring water from rivers or lakes. To prevent intake restriction and reduced pump efficiency, always match the hose diameter to your pump's inlet port.


Pool Backwash Hose — Dedicated Design for Filter Maintenance


A pool backwash hose transports wastewater from the pool filter's backwash port to a designated discharge location outside the pool. Because a pool backwash hose is designed for moderate-pressure discharge rather than suction, it differs from ordinary suction hoses in wall construction and fitting specifications. To enable discharge across lawns or into storm drains, these hoses are often longer, lighter, and more flexible than suction hoses.


A pool backwash hose should have clamp-compatible cuff ends, a UV-resistant outer casing, and enough length to reach the discharge point without putting undue strain on the filter valve connection. While larger pools or those with unusual layouts may require up to 100 feet of hose, most residential setups only need 25 to 50 feet. Even when placed on uneven ground, the sturdy, flexible body of VEVOR pool backwash hoses prevents kinking.


The most popular above-ground and in-ground filtration systems are compatible with the clamp-style connection since it fits standard multiport valve outlets. Frequent backwash cycles are crucial for the health of filters, and a specialized, appropriately sized hose ensures this maintenance procedure is easy, quick, and clean.


Water Pump Suction Hose Kit — Everything in One Package


By combining the suction hose, discharge hose, and required couplings or clamps into a single purchase, a water pump suction hose kit eliminates the uncertainty associated with hose selection. This feature is especially helpful for users who are installing a new pump system or replacing worn parts all at once. Because they don't require sourcing individual parts, kits are sized to match the exact pump inlet and outlet sizes, guaranteeing a proper fit.


Although conventional coupling sizes also fit most third-party pumps in the same horsepower range, VEVOR's suction hose kits are designed to work directly with its pump portfolio. Each kit comes with clamping gear, a matching discharge hose for the outlet side, and a strengthened suction hose to handle incoming vacuum without collapsing.


Storing a complete kit together makes deployment easier for users who use portable transfer pumps on a seasonal basis. They can connect, run, and drain without having to look for missing fittings. Whether the task is large-scale pool draining, flood response, or agricultural water transfer, a full hose kit ensures the entire fluid channel is compatible, reliable, and ready to work.


Matching Water Pump Hoses to Your Pump Setup


Hose size is only half of the fit, since the pump port and the connector type decide whether a hose attaches at all, so the table below pairs common setups with a hose, its connector, and what to verify.


Pump Setup Hose to Pair Connector Type What to Verify Buyer's Note
Pool filter backwash port 2 inch backwash hose Camlock with clamps Valve outlet size Measure the distance to the drain before ordering.
Sump pump or sand filter discharge Lay-flat discharge hose Pin lug fittings Pump outlet thread size Check the thread, as one buyer reported a poor fit.
Trash pump with a 2 inch inlet 2 inch suction hose kit Camlocks and cam and groove Strainer fit at the intake The kit includes a steel strainer to block debris.
High-volume pump with a 3 inch inlet 3 inch suction hose kit 3 inch NPT connectors Inlet port size Match the 3 inch bore to avoid restricting intake.
Long run to a storm drain 100 ft discharge hose Clamps or pin lug Total run length Long discharge runs lose little flow when sized right.

Selecting Water Pump Hoses by Material and Length


Long-term dependability and daily usability are both impacted by material selection and hose length. If you get these two things correctly, your hose will last the entire season and function reliably from the first to the final connection.


Why PVC Suction Hose Is the Most Practical Choice


With a design that can withstand the mechanical demands of pump inlet pressure without rapidly deteriorating, PVC suction hose dominates the market for good reason: it combines affordability, chemical resistance, and flexibility. In contrast to rubber hoses, PVC is still lightweight and simple to coil, which is important when moving equipment around a construction site or storing it in between seasonal uses.


The reinforcing layer is essential to a high-quality PVC suction hose. The vacuum generated at a pump intake will cause standard PVC piping without reinforcement to collapse, stopping flow and perhaps damaging the pump. To preserve the bore form under suction, high-quality solutions incorporate a stiff spiral made of steel or PVC into the hose wall. This spiral reinforcement runs the full length of VEVOR's PVC suction hoses, not just at the ends.


Even in longer hose lengths, full flow is possible because the smooth interior bore reduces friction loss. Additionally, PVC can withstand a wide range of water temperatures and is resistant to mineral and algae accumulation typical in pool and agricultural applications. A PVC suction hose offers the best combination of performance, weight, and cost for most users who operate water pump hoses seasonally or for sporadic transfers.


Matching Hose Length to Your Pumping Setup


Pump performance and convenience are both impacted by the sensible choice of hose length. If it is too short, you will have to place your pump uncomfortably near the water source. Friction losses and excessive length lower flow rates and increase the strain on the pump motor. The typical recommendation for suction hoses is to make the run as short as possible, preferably less than 20 feet, because each foot of inlet line increases the vacuum the pump needs to create to extract water.


Because the pump is pushing rather than pulling, discharge hoses are more tolerant of length. Lengths of 25 to 100 feet are typical for pool backwash hoses and discharge lines, with no appreciable performance loss, as long as the diameter is suitable for the flow rate. Standard water pump hose lengths from VEVOR include 13, 20, and 25 feet.


Longer discharge hoses are also available for pool and drainage applications. Before making a purchase, measure the actual distances between the pump and the source and between the pump and the discharge point. The expense and trouble of connecting hoses with connectors, which create potential leak sites and increase flow resistance, can be avoided by selecting the proper length up front.


Water Pump Hoses Best-Seller Comparison


The five best sellers below are one backwash hose, three suction hose kits, and one lay-flat discharge hose, so compare diameter, length, and connection against your pump ports and discharge distance.


Product Hose Type Inner Diameter Length Construction Connection Best For
2 Inch x 100 ft Blue Backwash Hose Backwash hose 2 in 100 ft High-density PVC, layered braid Camlock, aluminum fittings Single hose with camlocks; pool backwash to a far discharge point
3 Inch Suction Hose Kit, 65 ft Suction kit 3 in 20 ft suction, 65 ft discharge Rigid PVC, braided discharge 3 in NPT connectors Only 3 inch kit here; high-volume pond and site transfer
2 Inch Suction Hose Kit, 65 ft Suction kit 2 in 20 ft suction, 65 ft backwash Hard PVC, braided backwash Camlocks, cam and groove Longest backwash run in a 2 inch kit; pool draining at distance
1-1/2 Inch x 100 ft Lay Flat Discharge Hose Discharge hose 1.5 in 100 ft PVC, braided polyester Pin lug, 1.5 in NPT Only lay-flat hose here; sump and filter discharge, stored flat
2 Inch Suction Hose Kit, 50 ft Suction kit 2 in 20 ft suction, 50 ft backwash Hard PVC, braided backwash Camlocks, cam and groove Shorter 2 inch kit; small pump setups and compact sites

Shop VEVOR Water Pump Hoses for Reliable, Leak-Free Performance


VEVOR's selection of water pump hoses includes all diameters, materials, and lengths required for site drainage, pool maintenance, and agricultural transfer. Every product, including 2- and 3-inch PVC suction hoses, complete suction hose kits, and specialized pool backwash hoses, is designed to fit firmly and function reliably. VEVOR is the sensible option due to its competitive cost and reliable after-sales service. Choose the ideal hose for your pump now by browsing the entire selection.


FAQs


Can I use a PVC suction hose with a gasoline-powered pump?


Yes, gasoline-powered pumps can use PVC suction hoses with spiral reinforcement. To avoid air leaks that reduce suction performance, make sure the hose diameter matches the pump inlet port and that all connections are securely fastened.


What length of pool backwash hose do I need?


Most home pools require a backwash hose 25 to 50 feet long to reach an appropriate discharge position. To prevent connection issues, measure the distance between the drain or discharge area and the backwash port on your filter before making a purchase.


Is a 2-inch or 3 inch suction hose better for a water transfer pump?


The intake size and flow requirements of your pump will determine this. For tasks involving modest transfer and tiny pumps, a 2-inch hose works well. Larger pumps with more than five horsepower and high-volume applications require a three-inch hose.


Does hose length affect pump performance?


Yes, especially when it comes to suction. Longer suction hoses can lower the flow rate because they increase the inlet-hose demand. To maintain effective pump performance, keep the suction hose runs short and match the diameter properly.


Can you recommend durable hoses for high-pressure water pumps?


For higher pressure, choose braided hoses rated for it. The product pages list a 90 psi working pressure, with burst ratings of 174 to 180 psi on the 3 inch kit and the lay-flat hose. See the 1-1/2 inch lay-flat discharge hose.


How do I choose the right size of water pump hose for my needs?


Match the hose diameter to your pump's inlet and outlet ports. A 2 inch hose suits 1.5 to 3 HP pumps, and a 3 inch hose suits 5 HP and larger pumps. See the 2 inch suction hose kit.


What are the different types of hoses used with water pumps?


The main types are suction hoses with rigid walls, discharge and lay-flat hoses, pool backwash hoses, and complete suction hose kits. Each serves a different side of the pump. Browse the pump kits.


What are the best water hose kits for garden use?


For garden use, a 2 inch suction hose kit suits yard drainage and irrigation top-ups with mid-size pumps. The 20 ft suction hose plus a 50 ft discharge hose covers most gardens. See the 2 inch 50 ft kit.


How do I choose the right hose part for my water source heat pump?


The hoses on this page are for water pumps, and no heat pump fittings are listed. For a water source heat pump, follow the unit maker's hose and fitting specifications, matching connector size and pressure rating.


Tips & Inspiration