Rack Case
Results for Rack Case
A rack case is a portable, enclosed housing built around standard 19 inch mounting rails, so rack-mount electronics can be screwed in place and moved as one protected unit. The rigid outer shell surrounds the equipment on every side, absorbing knocks and keeping out dust while the gear is lifted, loaded, stacked, or stored. Removable front and back covers close the case for transport and come off for use, giving access to controls at the front and connections at the rear. Because each device is fastened to the rails rather than packed loose, it stays in position during movement and can be set up again quickly.
VEVOR rack cases come in four builds. Shallow polyethylene flight cases add a microphone compartment, which suits wireless microphone receivers and compact processors. Shallow ABS rack cases hold amplifiers and controllers in a slim body for car and van trips. Standard-depth ABS rack cases take full-size power amplifiers and rack mixers, and rolling rack cases put wheels under heavier multi-unit racks headed for the stage. Typical uses are mobile DJ setups, live sound and touring racks, wireless microphone rigs, rehearsal rooms, and studio or broadcast gear moved between rooms.
Four things decide what you need:
- Rack space: add the U height of every device you plan to mount, then allow one spare unit for a power strip or future gear.
- Internal depth: measure your deepest unit from the front panel to its rear connectors and add about 2 inches for cable bends.
- Transport method: a carry handle suits short trips, while wheels earn their place once a loaded rack becomes heavy to lift.
- Accessory storage: a microphone compartment or door mesh pocket keeps mics, cables, and adapters with the rack instead of in a separate bag.
Compare every size and depth in the full rack case collection, or browse the wider musical instrument storage range for more ways to protect and carry your gear between gigs.
Rack Case Types at a Glance
Use this overview to narrow down the build before comparing individual models.
| Type | Shell Material | Rack Sizes Offered | Overall Case Depth | Trade-offs |
|---|---|---|---|---|
| Shallow PE flight case | Polyethylene (PE) | 2U, 4U, 6U | 10.24 to 15 in | Built-in mic storage, but deep amplifiers will not fit |
| Shallow ABS rack case | ABS | 4U, 6U, 8U | 12.2 to 14 in | Up to 8U in a slim body; tight rear cable room |
| Standard-depth ABS case | ABS | 4U | 18.9 in | Takes full-depth gear but is carried by hand when loaded |
| Rolling standard-depth case | ABS | 6U, 8U | 18.9 to 19.25 in | Wheels move heavy racks; the 8U gives up 1U to wheels |
VEVOR Rack Cases for Safe, Road-Ready Transport of Audio, Broadcast & IT Equipment
Are you transporting rack-mounted equipment from a studio, installation site, or gig? During vehicle transfer and load-in, a suitable rack case shields pricey equipment from impact, vibration, and environmental exposure. Standard 19-inch rack-rail spacing, robust locking, and the protection features required for professional equipment shipping are available across VEVOR's 1U rack case through 8U rack case line.
Rack Units & Compatibility: Choosing the Right Size for Your Equipment
Rack units, or "U"s for short, are used to measure the size of rack cases. One U is equivalent to 1.75 inches of vertical mounting space. You can avoid buying a case that doesn't fit your equipment's actual dimensions by determining your equipment's total U count and choosing a case with the right depth.
Knowing the Size of Rack Units: 1U to 8U Configurations
Internationally, rack unit measurements are defined for IT, broadcast, and professional audio equipment. A 4U rack case offers 7 inches of usable vertical mounting space between the rack rails, since 1U is equivalent to 1.75 inches. Wireless receivers, power conditioners, and effects processors are examples of small units that fit well in a 1U rack case. One double-height piece of equipment, such as a preamp, or two single-space units stacked, can fit in a 2u rack case. An adaptable compromise for a compact mixer, audio interface, and compressor without undue size is a 3U rack case.
The 4U rack case and 6U rack case sizes are adequate for a digital mixer, wireless rack, and necessary processing for touring and live sound. Complete production racks, including mixers, amplifiers, and several effects devices, are housed in a single 8u rack case. It is easy to match case size to your equipment with VEVOR's rack cases, as each listing explicitly states the U count and internal usable height.
Internal Depth and Equipment Clearance: Beyond U Height
One dimension is rack unit height; another is internal depth, which is often disregarded but determines whether your equipment physically fits front-to-back inside the case. The front panels of standard rack equipment are 19 inches wide, although the depth varies greatly. A digital mixer can be more than 18 inches deep, whereas a simple effects processor may be 8 inches. Make sure the case's internal depth fits this dimension, with room for the lid closure, by measuring the deepest piece of equipment from the front panel to the furthest rear protrusion, including cable connectors.
Equipment can be fastened to both mounting planes for stability during transit, as the front and rear rack rails of high-quality cases are threaded for standard rack screws. Only front-mounted equipment is susceptible to internal movement, which can damage circuit boards during vibration. Every VEVOR rack case product page includes the usable interior depth and U height. Before placing an order for deep equipment or equipment with a lot of back connectivity, make sure the depth mentioned includes your deepest item, plus at least 2 inches for cable bend radius.
Foam Padding, Shock Mounting & Internal Protection
The interior protection system distinguishes between a basic box with rack rails and a real equipment transfer case. During vehicle transportation, high-quality internal protection controls vibration and impact forces. Impact protection begins with a closed-cell foam coating on the side walls and inside of the lid. Depending on the casing quality, the foam thickness usually ranges from 1/2 to 2 inches. In shallow 2U rack cases, thicker foam provides better protection but decreases internal clearance.
By isolating equipment from case-shell vibration during transit, shock-mounted rack rails reduce overall strain on solder joints and circuit boards. To disconnect equipment movement from case movement and thereby extend equipment service life, professional touring cases use rail-mounted systems that are either spring-loaded or rubber-isolated. Foam cushioning is standard on VEVOR's 4u rack case through 8U rack case models, and shock-mounted rail alternatives are explicitly indicated for a few touring-grade setups.
Standard 19-Inch vs. Shallow Rack Compatibility
The width between rack-rail mounting holes, or the 19-inch standard, has remained constant across professional equipment since standardization in the middle of the 20th century. Using genuine 19-inch spacing helps avoid compatibility issues with your case. "Effects racks," or shallow rack cases, are designed for equipment that does not require the full front-to-back depth.
When hauling simple wireless receivers or small effects units, a 2U rack case in a shallow layout may be only 12 inches deep, compared with 18 to 20 inches for typical touring cases, reducing weight. Throughout its U-size range, VEVOR offers both standard-depth and shallow rack cases; each listing clearly indicates the depth, so consumers can match case depth to their specific equipment profile without ordering too many cases or too much weight.
Matching the Case to Your Rig
Rack size and depth set the shortlist, but the gear you carry decides which extras matter most.
| Rig | Case Setup to Look For | Key Consideration | What to Watch For |
|---|---|---|---|
| Wireless mics and in-ear receivers | Shallow case with a microphone compartment | Mic storage | Keeps fragile mics with receivers; check antenna clearance at the front |
| Power amplifiers | Standard-depth case with removable front and back covers | Heat buildup | Run with both covers off so warm air can leave the rack |
| Mobile DJ processing and interfaces | Shallow 4U or 6U case with a door mesh pocket | Cable clutter | Pocket holds cables and adapters, so one case covers the gig |
| Multi-unit touring rack | Rolling case with wheels and a pull handle | Loaded weight | Rolling saves lifting; allow for the unit lost to the wheel base |
| Stacked cases in a van | Case with recessed latches and stacking grooves | Stacking stability | Flush latches will not snag; strap stacks so cases cannot slide |
Material & Protection Features: Built to Survive the Road
Whether a rack case will withstand years of transportation or break down after a few hard loads depends on its material structure and protection features. It is easier to distinguish between cases designed for professional use and those intended primarily for light-duty applications when one knows which features and materials are important.
Case Shell Construction: Plywood, ABS, and Hybrid Materials
The outer shell material determines the case's weight, impact resistance, and structural rigidity, and these factors are crucial when the case is handled by venue employees, placed in cars, or stacked. The industry standard for professional touring is plywood laminate construction. Baltic plywood with seven or nine plies is highly impact-resistant while remaining lightweight. Plywood casings have a mechanical advantage that plastic cannot match: they absorb and spread impact energy throughout the shell instead of sending it straight to the equipment inside.
For regulated transit situations, such as moving from studio to studio or transporting a personal automobile, ABS plastic boxes are more lightweight and provide sufficient protection. ABS is more resistant to moisture and scratches than plywood, yet it breaks when struck hard. A plywood structure is the safer option for professional touring when cases are handled roughly. All of VEVOR's professional range rack cases are made of laminated plywood, with edge protection and reinforced corners prominently marked on each listing.
Hardware, Latches & Handle Quality for Daily Use
How effectively a case handles the many open-close cycles and handling required for professional use depends on the hardware quality. Mid-tour hardware failure may result in equipment damage or delayed performances. Draw latches or butterfly latches with spring-loaded mechanisms allow one-handed operation and secure closure even during transit vibration. When stacking cases, recessed latches flush with the case exterior eliminate the risk of snagging. When fully closed, high-quality latches with positive engagement and cast or forged structure offer tactile feedback.
Recessed molded wells with sturdy spring-loaded grips protect hands while stacking and enable comfortable carrying of filled containers. It is better to rivet handles through the case shell as opposed to screwing them to surface plates since riveted handles resist pull-out failure and distribute force across a greater shell area. Across the board, VEVOR's rack cases feature spring-loaded handles and recessed butterfly latches, with hardware that matches the case's size and intended purpose. A 6u rack case features strengthened latches rated for heavier touring loads, while a 1U rack case uses lighter hardware to keep its weight down.
Best-Seller Comparison
Here is how the five top-listed rack cases on this page compare on the details that set them apart.
| Product | Usable Rack Space | Internal Depth | Mobility | Latch Type | Sealing | Built-in Storage | Best For |
|---|---|---|---|---|---|---|---|
| 6U PE Flight Case, Mic Compartment | 6U | 8.7 in | Carry handle | Recessed twist | Dust and splash seal | Mic compartment, mesh pocket | Only PE shell with mic storage here; shallow wireless rigs |
| 6U ABS Rack Case with Casters | 6U | 19.25 in | Casters, aluminum handle | Heavy-duty twist butterfly | PU seal strips | / | Deepest clearance and only stacking grooves; full-size amps |
| 8U Rolling Rack Case, 7U Space | 7U (plus 1U wheel base) | 18.4 in | Wheels, retractable handle | Recessed twist | Dust and splash seal | Mesh pocket | Most rack space in the top five; amp racks that roll |
| 4U Shallow ABS Rack Case | 4U | 11.4 in | Carry handle | Recessed twist | Dust and splash seal | Mesh pocket | Most compact ABS case here; processors carried by hand |
| 4U ABS Rack Case, 18.4 in Internal | 4U | 18.4 in | Carry handle | Recessed twist | Dust and splash seal | Mesh pocket | Full-depth clearance without wheel bulk; deep 4U amp stacks |
Shop VEVOR Rack Cases for Professional-Grade Equipment Protection
Professional audio and IT equipment shipping requires precise size, robust materials, and protection measures, all of which VEVOR rack cases provide. VEVOR can be used for any application, from small 1U and 2U rack case configurations for effects to large 6U and 8U rack case settings for traveling production. Each case offers competitive pricing and dependable post-purchase support. Examine the entire selection and safeguard your equipment right now.
FAQs
How do I calculate the number of rack units I need for a case?
For each item of equipment you intend to attach, add up its U height. A 1U is equivalent to 1.75 inches. To allow for cable management, choose a 6U rack case if your total equipment height is 5U. To ensure case depth compatibility, always measure the front-to-back dimensions of your deepest unit.
What is the difference between a 2U rack case and a 4U rack case?
For two single-space units or one double-height unit, a 2U rack case offers 3.5 inches of vertical mounting space. With 7 inches of vertical capacity, a 4U rack case can hold 4 single-space units or combinations of units.
Can I mount non-rack equipment inside a rack case?
Yes, however, you need rack shelves or specially made mounting plates fastened to the rack rails for the correct equipment security. During transportation, never put loose items inside a rack case, as vibration can damage both your rack-mounted equipment and any loose items.
Are VEVOR rack cases suitable for air travel?
When correctly packed, VEVOR's plywood rack cases are appropriate for checked baggage. Padding made of foam guards against impacts from handling. Inside the case, remove or secure any loose cords. A filled 6U or 8U rack case frequently exceeds the usual restrictions, so be sure to check the airline's weight regulations.
Do rack cases come with rack rails and mounting hardware?
Yes, the front and rear rack rails of VEVOR rack cases are pre-installed and threaded for standard 10-32 rack screws. Most models come with rack screws and cage nuts; before placing an order, check the product descriptions to confirm that the hardware is included.
What are the best rack cases for transporting audio mixers?
The best choice is a standard-depth case with enough internal depth for the mixer plus about 2 inches for rear cables. A 6U standard-depth rack case with casters suits most rack-mount mixers, while shallow cases only fit compact mixers and interfaces.
What features should I look for in a rack mount mixer case?
Look for front and rear rack rails, removable front and back covers, and secure latches. Removable covers let you reach controls and rear connectors at the gig, sealed seams keep out dust, and a door pocket keeps cables with the case. Always confirm internal depth first.
Are there durable and lightweight 4U rack cases available?
Yes. VEVOR's 4U range includes polyethylene and ABS cases with thick shells, recessed latches, and a sealed design against dust and light splashes. Shallow models are lighter to carry than full-depth cases, such as this 4U shallow ABS rack case with 11.4 inches of internal depth.
What are the best 4U rack cases for audio equipment?
The best 4U case is the one whose internal depth matches your deepest unit. VEVOR's 4U cases offer 8.7, 11.4, or 18.4 inches of internal depth, so a 4U flight case with a mic compartment suits wireless receivers, while full-size amplifiers need the 18.4 inch model.
How do I choose the right size rack case for my guitar equipment?
Add up the rack units of your guitar rack gear, such as a preamp, wireless receiver, and power conditioner, then allow one spare unit. Next, measure the deepest unit including rear connectors. A 2U shallow flight case suits a compact rig, while larger setups need 4U or 6U.