Works in perfectValue for money

Cracking value for money, does what it says on the tin. Came with a euro plug so that got chopped off and replaced with a three pin and didn't come with a compressor nozzle but fortunately, I had a few knocking about.

As a complete novice at plasma cutting I decided to try this one. I could probably have got cheaper on e-bay or others but for this sort of thing it is worth the extra as it is easier to return it if it proves faulty.The power lead is a joke at just 1.4 metres long so I replaced it with ba nice long heavy duty lead with a 32amp plug. I installed a 32amp socket in the shed so I will have no power problems and gave it a try.Thin sheet, which is what I got it for is a doddle. It did a good job on various thicknesses and managed a decent cut on its stated maximum recommended 10mm despite my lack of skill! It really didn't like an old chunk of 14mm but it tried hard, I think it lacked air pressure to clear the slag as it stuck to the bottom and wouldn't let go.I have tried it on about a dozen cuts with different thicknesses and the tip is still fine despite it not being a pilot arc machine so no complaints there. All in all I am very happy with it.

Seems to work well after curing the air leak on the air regulator, did not get the make pictured in ad but another brand. ( More than likely all the same apart from the badge ) Also no bag included as in picture for keeping the plasma gun lead and earth lead in.Overall appears to be fine for DIY use.

Works well, need to be aware that for full power it will require a 32amp connection.

Çin malı sahtekarlığı avrupa malı olduğunu düşündüğüm için tercih ettim ama klasik çin malı ürün geldi 50 amper lik kutu içine 30amperlik malzeme koymuşlar hemde 6 mosfet den 2 tanesi yok yani 4 mosfet kısaca 20 veya 25 amper seviyesi gücü var içinde Cut351a2 ve cut35-2a2 kartları var

Fast shipping Works as it should. Feels pretty cheap but that is expected for such affordable price. A great addition to my hobby garage!

Could not believe it’s capability for the price and it does exactly what is says on the tin couldn’t recommend enough

Fantastic piece of kit, it works perfectly. A small unit with big punching power. Worth every penny.

I ordered this plasma cutter a little while ago. It was delivered very quickly and was well packed. It was not difficult to assemble and the instructions were quite easy to follow. Although I haven't used it a great deal it does seem to work very well. I did some test cuts in mild steel about 2.5mm thick which were clean and showed very little slag. I'm sure this machine will be a very useful addition to my workshop.