All

Customer Reviews

  • 4.7
  • 4.5
  • 4.6
  • 4.7
Alan Craigon Alan Craigon
Mr
Excellent anvil for the occasional need I have. Mounted on wooden block it makes a solid work platform. Can't fault this product and would recommend.
0
Renier de Jager Renier de Jager
30kg Anvil
Heavy, so the box it was packed in disintegrated in transit and was delivered with very little of the packaging in tacked. Anvil survived a little worse for ware but all in one piece albeit with a few scratches.
0
Working in Wood Working in Wood
Mr
Very good for the price. Overall very useful. The horn is a lightly rough casting and required some smoothing for finer work as does the hole , but overall the weight and design are fine for an occasional use bench anvil.
0
Rick Rick
Not the worst
It's a fairly hard lump of metal to bash other lumps of metal against. What could go wrong?
0
Stalexmkl Stalexmkl
Round Horn Steel 30kg
Excellent product, I ordered 2 times already. Good casting quality and price which is lower than similar products!
110lb Blacksmith Anvil Steel Anvil 50kg Solid Heat Treated Round Horn Metal Work
0
rawfish111 rawfish111
Nice tone
For its size a good little Anvil. I have it mounted on a Sycamore log to gain the height and have had no issues with it as yet. Mainly I have used it so far for basic forging and pattern welding.I will be making some tools for use in the Hardy hole and also a holdfast in the next few weeks but envisage little problems with this having taken away the manufacturing burrs. Hardy Hole is 25mm as its the Pritchel Hole
0
Stalexmkl Stalexmkl
Round Horn 30kg
For this price it is an amazing anvil! Overall quality is very good, design as well. The only thing that could be better is the additional holes on the bottom for mounting, but in any case I am very satisfied!
110lb Blacksmith Anvil Steel Anvil 50kg Solid Heat Treated Round Horn Metal Work 110lb Blacksmith Anvil Steel Anvil 50kg Solid Heat Treated Round Horn Metal Work 110lb Blacksmith Anvil Steel Anvil 50kg Solid Heat Treated Round Horn Metal Work 110lb Blacksmith Anvil Steel Anvil 50kg Solid Heat Treated Round Horn Metal Work
0
Thor Thor
The well-tempered anvil
Sold my very large anvil and invested in this. Very happy. Excellent quality casting. Ideal for driving out kingpins and cold-tempering road springs at a weight I can move around if necessary. Strongly recommended.
0
Paul Paul
Second roll of PEX LINE
anvil decent for the most part got a bunch of chips and the round hole is unusable but that second statement anyone can tell by looking at the thing so I'm telling you nothing new. What might be of use however that my 60kg anvil the drivers refused to deliver for over a week then attempted to return to sending stating I refused it (I did not) I called and waited 4 days for call backs but no answer so I went to the depo where the tracking said it was (waiting for return). Due to its weight they would of never attempted to deliver it (because its unweight to not need pallet to get to the depo but to heavy to be delivered by one person on a ups van? go figure that one out cause I cant.) However due to its weight the return also would of took abnormally long which is why I was still able to pick it up. So Once it is at your local depo I recommend just going to pick it up in person don't bother with the customer service they wont help and the "refused the package" I think is their attempt to get out of contract by blaming the purchaser. (this isn't why I rated it 4 stars that's just the finish of the forge scale and chip marks meaning it needs about 2-4 hours of good clean up)
0
David S. David S.
Nice anvil for a reasonable price
Arrived very poorly packaged in a crap box with no packing material.This anvil is both cast and steel. The casting marks are clear however it is cast solid steel and not hollowform cast iron. Is it forged? Meh. Is it heat treated? Also. Meh.The top surface is a ground finish. The edges are rough, pitted, and sharp. A little grinding on the sides gets you down to clean metal and you can then break the edges to a well rounded shape.The horn is covered with a thick coat of paint with deep pitting beneath. It took some effort with a variety of flap discs, mill files, and sandpaper to remove the pitting but the steel beneath is solid.All in all. Not a bad little anvil for working at a small scale. I give it a four out five because it is about the only anvil available in this weight, and the price is okay but it does need some work to bring it up to an acceptable working state.
110lb Blacksmith Anvil Steel Anvil 50kg Solid Heat Treated Round Horn Metal Work
0

People Who Bought This Item Also Bought

44-330-175-5511 Monday to Friday, 08:00-16:00, GMT+1 ©2009 - 2022 VEVOR All Rights Reserved