Customer Reviews for VEVOR Pipe Bender 3/8 to 1 Inch Pipe Tubing Bender Tube Bender 10 to 25mm Bending Formers Pipe Bender Set 7 Round Dies Size for Copper Brass Aluminum Stainless Steel Pipe

really good tool looking forward to making some good stuff

Good quality for the price point.

Does the jobDoes are not perfect but can_ beat it for the price

Hace las curvas en acero INOXIDABLES a 90 perfectas.

Excellent materiel, petit b_ol, je m'attendais.dais avoir avec un mallette !?

Good product. Use caution to load the bend on plane with the dies, otherwise you will crack or chip the die just like I did.

I usually don't do reviews. Don't know what to say. My story on this bender1st-this is a tube bender, measuring the OD(outside diameter) of aluminum tube. This is what I have and needed. Pipe is measured by ID( inside diameter)So, make sure you know what you have,tube/pipe from the startB-I have a shop, brand new, so no place to mount the base yet-so I skinned a tree just a little and mounted the base on it. Very happy I thought of that, thought outside the box per say3-since I had never done this before and only one aluminum tube so no room for error. I marked the center of the tube w marker, placed it in center of jig, rolled it towards the hold clamp and marked it there. Then placed it in hold clamp and started bending. It ended up being almost perfect. Luck/Skill=you decide. Placed a 2'x3' carpenter square on it marked the long side and cut off 1/4"D-this was exactly what I needed and affordable for me. I'm a DisVet so not a lot of money to waste or throw awayFifth-this works great, all manual, but I have more strength so for it is PERFECT and preciseInfinity/Last/Z-it is still mounter on tree(2 weeks now approx) still bending tube, for friends now, making boat hold on brackets and 4"tall rails around top of Jon boats

I've used this bender for several projects and am very happy with the results. It was clean and ready to use upon removing its packaging. It wasn't oily and/or dirty like a lot imported metal working tools are.

The tubing bender is what I needed to be able to bend light wall 1/2", 5/8" and 3/4" tubing. I was even able to bend 3/8" solid round rod with no problems. I would not use this for bending heavy gauge tubing. Another tip, when using this bender I always shoot a little wd40 into the dies themselves as this will help it by causing less friction when bending tubing.

It is what I wanted