Customer Reviews for VEVOR 30L Pressure Feed Paint Pot Tank 8 Gallon Spray Gun Sprayer Regulator Air Agitator with Manual Mixing Agitator

Pot sous pression impeccableJ_i modifi le mano pour mon utilisation (peinture 1bar)Et j_i aussi chang des raccords et enlev la vannes qui sont un peu ? cheap ?J_i chang les tuyaux pour des plusieurs long (10m)Le pistolet semble correct mais je l_tilise pasJ_i mont dessus mon iwata WS200Seul la cocotte m_nt_essait et elle me convient parfaitement

Rapport qualit prix parfait a date

Brilliant bit of kit. I converted it into a resin casting pressure pot, the paint extraction pipe and paint agitator all unscrew so all that_ needed is a bolt with 2 metal washers and 2 rubber washers for where the agaitator pipe goes.It_ sits it about 45psi comfortably without the air compressor attached, so the resin can cure overnight.Extremely happy with the product

fonctionne parfaitement, m'a aid repeindre une pi_e de 50m2le compresseur utilis est un 100Lune notice d'utilisation aurait _ agr_ble

I have never used one of these so this is new to me. My BIGGEST problem is the instructions are not in English. I need ENGLISH so I can figure out how to use the thing.

I bought this to make a pressure pot for resin casting. Build quality is excellent for the price and by spending a couple of quid on fittings it_ up and running and holding pressure for 24 hours.

Purchased for conversion to a resin curing pot. Had to buy all new fittings and a gauge. The ones that come with the pot are junk once removed. Also the paint feed tube had to be cut out, as it's so polished that none of my wrenches would grab it. The seal is GREAT. Most inexpensive pots have junk seals that should just be thrown away. Not this one. Only time I had an issue was because some dirt got on the seal that I didn't notice.

Worked great like I knew it would didn_ have any problems with it.

This pressure pot had an excellent price and everything arrived on time and in perfect condition. Works great for my needs. I definitely would purchase again.

Works good,I just changed the regulator and pressure relief for better ones.I'm using it as a pressure pot for resin and does the job.