Customer Reviews for Vevor Cross Slide Table Milling Drilling Machine Worktable 5-1/2" X 12" X Y Axis

Many reviews focus on the finish of these tables, in most respects mine was usable out of the box. I stripped it and relieved all sharp edges but found the ways to be adequately ground so just lubricated. Thrust bearings were present and the gib strips adjusted to leave free movement with no play. The only issue was the perfunctory flaky chroming of the hand wheels which I had to clean up!. For the price I was impressed but have yet to affirm the levels on the horizontal plane. Not so critical on drill press but important for milling? Overall a worthwhile purchase.

perfect function for my use in my garage shop, i use it in my hobby mill...................................................................................................................................................................................................................................

Fast shipment, no fuzz. Item fullfills my need. Also a good price. No complains. Sweden. .................................................................................

Arrived fast and well packed to Finland. I took it apart, filed, cleaned and adjusted it. After that it is perfect. I like it. You can`t beat this deal. I strongly recommend.

Good price-quality ratio, express shipping, great contact with the store. One of the few stores that cares about the customer and the good name of the store! However, the product has minor defects that can be removed by yourself. These are play on the cranks and the metric scale is carelessly engraved he was not influenced by it. I also recommend that you lubricate all friction elements well (for this I recommend graphite grease). DIY enthusiasts can confidently recommend the product!

Sau schwer und stabil, kann man gut mit arbeiten wenn s nich so genau sein muss

Soweit ok mußte kleine Verbesserungen machen am schraubmechanismus Vorschub seitenschub, da sehr schwer gängig es ging ansonsten gans gut durchdacht das ganze Danke

Great value for money, had to adjust the lead screws to take up the backlash but works great. A cheap way of converting a pillar drill into a milling machine.

zu grob verarbeitet. Aber auch sehr Massiv. Etwas nacharbeiten und der Tisch reicht zum bohren aus. Kann ich bedingt empfehlen. Schön ist das Gewicht und die Auflge Fläche ist plan und sauber geschliffen

There is a little slop in the XY when it arrives, but tightening the shims and a teardown/rebuild fixes most of it. Unless you are doing heavy milling operations--BUY IT! I turned my milling table into the XY of a DIY Lathe. So long as the shims are tight, the cuts are clean! I'm incredibly impressed by the craftsmenship of this milling table. Definitely definitely worth the money!