Customer Reviews for VEVOR Electric Honey Extractor Beekeeping Equipment 4/8 Frames Stainless Steel

It was easy to assemble. There is very little space between the revolving basket and the drum. National shallow frames have to be fixed in place or they lean and would prevent the machine from working. The internal reservoir is small so it is necessary to leave the tap open to enable the honey to drain into a bucket while it is being spun out. It makes a good job of emptying the combs as long as they are turned twice. Taking everything into account it offers very good value to a new beekeeper but they need slim hands to fix national frames into place.

Ottimo rapporto qualità prezzo ma il cestello è arrivato ovalizzato probabilmente durante il trasporto; quando gira tocca su un lato: ho dovuto raddrizzarlo. Adesso ok.

Die Schleuder macht was sie soll, die Verarbeitung ist dem Preis entsprechend und könnte natürlich besser sein. Der Motor ist leise und die Geschwindigkeit kann reguliert werden.

Worked well down side lots of sharp bits here and there cut my finger

Screwed the legs down to a 4 solid wooden platform to keep it sturdy while in operation and so pail can fit under. Spun one side at 70% rpm then flipped frames. Spun second side slowly then gradually increased speed to max. Flipped frames again to get first side fully extracted at max speed. There is some off balance wobble until more honey is removed from frames. This device works way better than a hand crank I previously used.

I had a small issue with the plastic covers while installing them. Once all the screws and nuts are in place loosely you have to make sure that you pull the cover outward while tightening the screws. A helper comes in handy at this point. If you don't do this the covers bind in the hinge and they will not lay flat on the metal drum. Overall very happy with this product. It's a very good bargain compared to other high priced extractors. Just right for the small bee keeper.

This was easy to assemble and dissassemble for cleaning. Mine did not have any safety switch but that is fine with me. Made extraction easy. It's not the fastest machine but is consistent and only takes about 5 minutes per side for 10 minutes for full extraction. Balance the load and 0 woble.

This product really works as it should and the other reviews were all correct. Its a nice machine! And fits anywhere.Thanks!

Worked well... Once I got the caster wheels and platform complete! The first time I used this extractor I thought the legs would rip off with 2 people trying to hold it down, and bolted to a heavy board! Then I made a base for it with casters thanks to some guy on YouTube! What a difference, totally manageable with one person and no more crazy leaping!So now 5 stars thanks to my modifications... Hoping this will help others with the shaking issues! And yes the legs are razor sharp as others have mentioned so be careful.So far so good

Die Schleuder macht was sie soll, die Verarbeitung ist dem Preis entsprechend und k?nnte nat_lich besser sein. Der Motor ist leise und die Geschwindigkeit kann reguliert werden.