RV Covers
Results for RV Covers
An RV cover is a fitted fabric shell that drapes over a parked motorhome or travel trailer from roof to skirt. It usually comes with buckle straps that run under the chassis, tire covers, a storage bag and a repair kit. The owner lifts the rolled cover onto the roof, unrolls it down both sides, then cinches the straps and fits the tire covers. These covers are designed for outdoor storage in driveways, yards and open lots. Unlike a carport, a cover packs into a bag, and unlike a plain tarp it is cut to one length band.
Every cover here shares zippered side and rear doors and a strap set that crosses under the body. Compact trailer covers suit 18 to 20 ft units that still need a fully closed shell. Mid-length covers move up to 22 to 24 ft, with a rear door for trailers that enter near the back. Oxford fabric covers replace the non-woven top with woven Oxford on 28 to 31 ft trailers. Long trailer covers stretch to 30 to 33 ft for the biggest towables in stock. Class A motorhome covers close over 40 to 43 ft coaches with a taller body panel. Owners choose by measured length, fabric and how much weight they can lift onto the roof.
Five things decide which one fits:
- RV length band: the measured length range each cover is cut for.
- Top fabric: the material and layer count over the roof.
- Cross-section: the width and height of the shell around the body.
- Spare length: how far the shell runs past the longest RV in its band.
- Carry weight: what you lift onto the roof while fitting it.
See every RV cover on this page, then browse the wider RV supplies range.
RV Cover Types at a Glance
The four cover builds on this page differ in fabric, body profile and the load you hoist, as the rows below set out.
| Type | Fabric Build | Shell Profile | Lift Weight |
|---|---|---|---|
| Short-band trailer cover | Four non-woven layers on the roof, three down the sides | 103.1 in wide, 104.7 in high | 26.5 lbs for the 18-20 ft size |
| Long-band trailer cover | Same four-over-three non-woven layering, longer cut | 106.3 in wide, 108.3 in high | 37.0 lbs for the 30-33 ft size |
| Oxford trailer cover | 300D Oxford roof with 210D Oxford sides, 1000 mm water rating | 106.3 in wide, 108.3 in high | 24.9 lbs, lighter than any non-woven cover |
| Class A motorhome cover | Four non-woven layers on the roof, three down the sides | 107.1 in wide, 120.5 in high | 47.0 lbs, the heaviest build |
VEVOR RV Covers for Every Class, Size, and Travel Trailer Configuration
Are you looking for a cover that perfectly matches the length and class of your RV? VEVOR RV covers provide a precise fit and significant weather protection, whether you own a Class A motorhome, a Class C camper, or a travel trailer with slide-outs. Every cover shields your investment from UV rays, wind, rain, dust, and debris, ensuring that your RV is always prepared for travel.
RV Class and Length Compatibility Across the VEVOR RV Cover Range
Purchasing the wrong-size cover exposes your RV and costs you money. Instead of a loose, generic sheet that flaps in the wind and damages the surface, each RV class and length needs a cover that fits the vehicle's actual profile. VEVOR manufactures RV covers for specific class profiles and length ranges, providing each owner with a snug, secure fit that withstands all weather conditions.
Class A RV Covers for Full Size Motorhomes
Class A motorhomes require coverings that complement their huge, flat-sided profile without sagging or tugging because they are at the top of the size scale. With reinforced seams and elastic hem corners that securely grasp the vehicle body, VEVOR Class An RV covers span the entire length of the motorhome. In addition to preventing wind from lifting the cover, this snug fit removes the friction and flapping that gradually erode painted surfaces.
With purpose-sized panels, VEVOR provides Class A RV covers for 30-, 32-, and 40 ft RV covers in a variety of length bands. Each cover has adjustable tension straps that buckle beneath the vehicle. These straps help keep the cover stable in high winds throughout the storage season.
Zipper-access doors in the front and rear panels of VEVOR Class A covers allow owners to access the engine compartment, entrance door, and windscreen without removing the entire cover. This lets owners perform routine inspections without removing the cover. Throughout the off-season, full-size motorhome owners can enjoy the ease and protection their investment deserves with VEVOR Class A RV covers.
Class C RV Covers for Mid Size Cab-Over Campers
Standard covers struggle to accommodate the unique cab-over sleeping area of Class C RVs, which extends forward past the cab. With a curved front panel that neatly fits the cab-over area without bunching or leaving gaps, VEVOR Class C RV coverings compensate for this longer front overhang. The windows and cab-over seams are two of the most frequent leak locations on Class C cars, and this exact design keeps moisture away from them.
Class C VEVOR sizes include 24-foot, 27-foot RV covers, and 28 ft RV covers, which are among the most popular length ranges requested by owners. Customers receive a fitted outcome rather than a compromise, since each size uses pre-formed panels that correspond to the actual proportions of typical Class C floor plans. The regions where the cover contacts rooftop edges and slide-out corners, which experience the most wear during wind exposure, are protected by reinforced corner patches.
By allowing air to circulate beneath the cover, integrated vents in the roof panel prevent moisture buildup and the growth of mildew on the outside of the RV. For mid-size camper owners, VEVOR Class C RV covers offer a solution that accurately fits the distinct cab-over design and maintains that fit for months of outdoor storage.
Travel Trailer Covers and RV Trailer Covers for Towable Units
Compared to RVs, travel trailers and fifth wheels have distinct coverage requirements. Due to their owners' seasonal use, these towable units sit lower to the ground, often have multiple slide-out rooms, and spend more time in storage than RVs. With low-profile hem designs, slide-out-compatible side panels, and sturdy corner reinforcements that withstand abrasion at ground level, VEVOR travel trailer covers address all these issues.
From 18-foot compact models to 32-foot extended floor plans, VEVOR offers covers up to 32 ft to accommodate many towable trailers. Popup campers and smaller entry-level trailers work well with the 18-foot RV cover. Mid-size family trailers with one or two slide-outs are the aim of the 24 ft RV coverings. Larger luxury trailers with extended kitchen or living quarters and full-length sliding rooms can be accommodated by the 30 ft RV cover.
Owners can access storage compartments without having to battle the entire cover thanks to the zippered side panels at the utility compartment and entry door of each RV travel trailer cover. The front cap panel's soft inner lining shields the gel coat and fiberglass finishes from surface-contact scratches, while the elasticized rear corners wrap the cover tightly over the trailer's hitch end. VEVOR trailer covers provide towable RV owners with a comprehensive, season-long protective solution that accounts for the unique shape and access requirements of their vehicles.
Which RV Cover Fits Your Rig
Measure the RV with its bumper, ladder and spare tire but without the hitch, then find the line that matches to land on one cover.
| Confirm Before Purchase | Matching Specification | Recommended Product | Main Limitation |
|---|---|---|---|
| Your trailer measures 18 to 20 ft end to end | 18 to 20 ft band on a 253.5 in shell | 18-20 ft trailer cover | Falls short once the body passes 20 ft |
| Your trailer measures 22 to 24 ft end to end | 22 to 24 ft band on a 300.4 in shell | 22-24 ft trailer cover | 29.3 lbs to lift onto the roof |
| You want an Oxford top for a 28 to 31 ft trailer | 300D Oxford top, 1000 mm water rating, 24.9 lbs | 28-31 ft Oxford cover | Fits trailers up to 31 ft only |
| Your trailer measures 30 to 33 ft end to end | 106.3 in wide, 108.3 in high shell, 408.3 in long | 30-33 ft trailer cover | 37.0 lbs to lift onto the roof |
| Your Class A coach measures 40 to 43 ft with roof units | 516.5 in long, 120.5 in high shell | 40-43 ft motorhome cover | Too long for a 37 ft coach, 47.0 lbs to lift |
Size Specific RV Covers From 18 ft to 40 ft for a Perfect Fit Every Time
Purchasing a cover by length range instead of a generic size group yields significantly better outcomes. A cover with the simple designation "large" may fit anywhere between 28 and 36 feet, and none of those lengths will fit it well. Every customer chooses a cover that is within a few feet of their RV's exact length because VEVOR offers RV coverings in narrow length bands. Keeping the fabric under tension rather than slack results in a tighter fit, better wind resistance, and longer cover life.
VEVOR covers the entire range of popular RV lengths, including 18, 24, 27, 28, 30, 32, and 40 ft. Measure from the front cap to the rear bumper and select the matching length band to get a tailored fit. Each length band offers a professional fit without unique pricing by using panel measurements and strap placement optimized for that particular size.
Material Quality and Weather Protection in VEVOR RV Covers
A precise fit only delivers full value when the cover material also resists weathering. VEVOR chooses cover materials that can sustain wind stress over several storage seasons, withstand UV deterioration, and repel water while allowing moisture vapor to escape. The right material will preserve your RV's finish and interior while being durable enough to pay for itself over many years of use.
UV Protection and Waterproofing That Keep Your RV Exterior in Top Condition
In the long run, sunlight damages RVs more than wind or rain. UV radiation deteriorates plastic trim on all exposed surfaces, oxidizes gel coat, fades decals, and cracks rubber seals. To prevent this kind of cumulative surface damage during storage, VEVOR RV covers use UV-stabilized outer fabric that reduces harmful UV exposure.
A water-repellent outer fabric and a breathable middle layer form the multi-ply outer layer. When it rains, the breathable layer allows trapped moisture vapor to escape while water flows off the outer surface. This combination reduces humidity under the cover that encourages mildew on siding, awnings, and seals, limits seam intrusion and prevents roof pooling. At each stitched junction, the roof panel's taped seams provide additional water resistance, offering owners peace of mind during periods of heavy rain and prolonged wet seasons.
Wind Resistance and Durability Features That Keep the Cover in Place All Season
When a cover blows off during the first heavy wind event, it offers little protection and could damage the RV's surface as it rips free. The multi-point attachment mechanism used by VEVOR RV coverings keeps the cover secured to the vehicle in strong winds. Adjustable belly straps cross beneath the chassis and buckle to pull the cover down and inward.
Corner patches, zipper borders, and reinforced stress areas at strap attachment points can withstand repeated tension loading without ripping. To prevent the cover borders from rising in gusts, the elastic hem at all four corners grips the vehicle body. VEVOR adds structural strength at each junction that wind pressure targets first by using double-stitched seams throughout each cover panel. When combined, these qualities provide RV owners with a cover that remains in place throughout the storage season without frequent readjustment or maintenance.
Best-Seller Comparison
The five best sellers below are set against the length band, top fabric, cross-section, spare length and carry weight that decide a good fit.
| Product | RV Length Band | Top Fabric | Cross-Section | Spare Length | Carry Weight |
|---|---|---|---|---|---|
| 30-33 ft Non-Woven Trailer Cover | Trailers of 30 to 33 ft, the longest band of the five | Four non-woven layers on the roof, three on the sides | 106.3 in wide by 108.3 in high, tied for roomiest | 408.3 in shell, about 12.3 in past 33 ft (calculated) | 37.0 lbs, the heaviest of the five |
| 28-31 ft Oxford Trailer Cover | Trailers of 28 to 31 ft | 300D Oxford roof, 210D sides, 1000 mm water rating | 106.3 in wide by 108.3 in high, tied for roomiest | 383.9 in shell, about 11.9 in past 31 ft (calculated) | 24.9 lbs, the lightest of the five |
| 20-22 ft Non-Woven Trailer Cover | Trailers of 20 to 22 ft | Four non-woven layers on the roof, three on the sides | 103.1 in wide by 104.7 in high, 3.6 in lower than rows 1 and 2 | 276.8 in shell, about 12.8 in past 22 ft (calculated) | 26.5 lbs, matching the 18-20 ft cover |
| 22-24 ft Non-Woven Trailer Cover | Trailers of 22 to 24 ft | Four non-woven layers on the roof, three on the sides | 103.1 in wide by 104.7 in high, 3.6 in lower than rows 1 and 2 | 300.4 in shell, about 12.4 in past 24 ft (calculated) | 29.3 lbs, 2.8 lbs more than the 20-22 ft cover |
| 18-20 ft Non-Woven Trailer Cover | Trailers of 18 to 20 ft, the shortest band of the five | Four non-woven layers on the roof, three on the sides | 103.1 in wide by 104.7 in high, 3.6 in lower than rows 1 and 2 | 253.5 in shell, about 13.5 in past 20 ft, the most slack (calculated) | 26.5 lbs, tied lightest of the non-woven covers |
Why Choose VEVOR RV Covers?
From 18-foot travel trailers to 40-foot Class A motorhomes, VEVOR RV covers accommodate every class, length, and trailer layout. Waterproof seam construction, UV-stabilized fabric, and multi-point attachment mechanisms keep your cover securely in place and your RV safe throughout the season. VEVOR offers competitive pricing, professional-grade protection, and dependable after-sales support. Explore the entire selection of RV covers right now to safeguard your investment.
Frequently Asked Questions
How do I measure my RV to choose the correct cover size?
Measure in a straight line from the front cap to the rear bumper. Choose the VEVOR cover length band that corresponds to your measurements. A properly fitting cover has minimal slack to avoid surface friction and flapping.
Do VEVOR travel trailer covers fit units with slide-outs extended?
No. Slide-outs must be fully retracted before installing any RV cover. To properly handle contact pressure, VEVOR travel trailer coverings have reinforced side panels at common slide-out points and support the slide-out profile when retracted.
Can I leave my RV cover on during winter snow loads?
Yes. VEVOR RV covers use reinforced seams and roof-panel construction to handle seasonal snow. Remove large snow accumulations regularly to reduce roof load and cover stress.
What makes VEVOR RV covers breathable, and why does that matter?
VEVOR covers use multi-ply fabric with a permeable middle layer that blocks liquid water while letting vapor escape. By doing this, you can protect the outside and interior surfaces of your RV from mould, mildew, and condensation damage while storing it.
Can I put on an RV cover by myself, and how do I do it?
You can, but a second person on the ground makes the roof work faster and safer. Set the rolled cover on the roof with the FRONT label forward, unroll it down both sides, then clip and tighten the under-body straps. The 18-20 ft trailer cover weighs 26.5 lbs to lift.
What are the best materials for RV covers to withstand weather?
Multi-layer non-woven fabric and coated Oxford fabric both suit outdoor storage when the cover also breathes through vents. Non-woven layers stay soft against paint, while Oxford adds abrasion strength. The Oxford RV cover pairs a 300D roof with 210D sides and a 1000 mm water rating.
What maintenance is required to keep RV covers in good condition?
Keep the cover clean, dry and patched. Brush off leaves and snow, let the fabric dry fully before folding it away, and check the buckles and zips at each visit. The 20-22 ft cover comes with a repair patch, double-sided tape and a storage bag.
What are the benefits of using a cover for my RV or camper?
A cover keeps sun, rain, snow, dust and bird droppings off the paint, seals and roof while the RV sits parked. It also cuts the washing needed before the next trip. The 22-24 ft travel trailer cover adds reflective strips front and back for visibility at night.
Can you recommend the best RV cover for winter storage?
For winter, pick a cover cut to your exact length band, with vents to release moisture and straps that pull it tight against wind. Clear heavy snow so it does not weigh on the roof. The 40-43 ft motorhome cover has six vents and a full under-body strap set.
What should I consider when buying a cover for my travel trailer or teardrop trailer?
Start with the measured length, bumper and ladder included, then check roof height and where the doors sit. Teardrop trailers shorter than 18 ft fall below the smallest band here, so a cover would hang loose. The 30-33 ft travel trailer cover opens at the side and rear for entry.