Select the country/region, language, and currency you prefer for shopping.

Utility Pumps

Price
30 ~ 50
50 ~ 100
200 ~ 500
500 & Above
Customer Rating
5 stars only
4 stars and up
3 stars and up
2 stars and up
1 star and up
Special Offers
On Sale
Bulk Savings
In Stock
Pickup
Black Friday
VEVOR Gas Powered Water Pump, 50.8 mm, 132 GPM 6.5HP Semi Trash Water Transfer Pump Portable, Gasoline Engine with 7.62 m Discharge Hose, Heavy Duty Frame, Cast Iron Impeller, for Irrigation, Pools
(45)
219.99
219.99
Deal after registering
Member discounted price
0% cash back at checkout.
219.99
Non-PRO Account
219.99
Save
Non-PRO Account
You May Also Like
Recently Viewed

Results for  Utility Pumps

A utility pump is a general-purpose electric pump that moves water from one place to another whenever gravity cannot do the job. It draws liquid in through an inlet, drives it with a motor-spun impeller or a flexing diaphragm, and pushes it out through a discharge port to a drain, a tank, or a hose. Some sit directly in the water they are clearing, while others stay dry and pull liquid up through a suction line. Rated by how much it moves per hour and how high it can lift, a utility pump handles draining, transferring, circulating, and pressurizing water on demand.


The range covers six working types. Submersible utility pumps sit in the water and clear it fast, from 2,450 to 5,000 GPH with lifts around 30 to 33 feet. Transfer pumps stay dry and move water or thin liquids through hoses at 360 to 1,600 GPH on 110 to 120V AC. 12 Volt potable water pumps are self-priming diaphragm units delivering 1.2 to 6 GPM at 40 to 100 PSI for fresh-water systems. Recirculating pumps run low-wattage heads at up to 10 GPM to keep hot water looping. Condensate pumps lift the small drip from HVAC gear up to 33 feet to a drain. Gas-powered semi-trash pumps move 128 to 422 GPM for heavy outdoor jobs. Typical uses are draining a flooded basement, transferring water from a rain barrel or pool, supplying taps in an RV or boat, circulating a hot-water loop, and clearing HVAC condensate.


Four things decide what you need:


  • Flow rate: match gallons per hour or minute to how fast you must move water, since a drain race needs volume and a tap needs steady supply.
  • Head and pressure: check the lift in feet for drainage or the PSI for pressurized systems, because flow drops as the pump works against height.
  • Power source: pick 120V AC for fixed indoor use, 12V DC for vehicles and boats, or a gas engine for off-grid outdoor volume.
  • Placement: submersible goes into the water, surface-mount stays dry with suction and discharge hoses, inline mounts into the pipe run.

Browse the full utility pumps range to match flow and power to your job, or step up to the wider water pumps category.


Utility Pump Types at a Glance


Compare the main utility pump types below on the specifications and placement that most separate them.


Pump Type Flow Range Power Source Placement Best For
Submersible utility pump 2,450 to 5,000 GPH 120V AC Sits in the water Draining basements, pools, ponds and flooded pits
AC transfer pump 360 to 1,600 GPH 110 to 120V AC Surface, hose-fed Emptying rain barrels, hot tubs and aquariums
12V diaphragm / potable pump 1.2 to 6 GPM 12V DC Inline, self-priming Fresh-water taps in RVs, boats and off-grid cabins
Recirculating pump Up to 10 GPM 110 to 120V AC Inline on pipe Instant hot-water loops and heating circuits
Condensate pump 9.6 to 110 GPH 100 to 240V AC Beside the appliance Lifting HVAC, furnace and dehumidifier drip to a drain
Gas semi-trash pump 128 to 422 GPM Gasoline engine Surface, hose-fed High-volume irrigation and site drainage off-grid

VEVOR Utility Pumps for Marine, Residential, and Industrial Water Management


Are you looking for utility pumps that can handle everything from condensate drainage and basement flooding to cleaning marine bilges and transferring potable water? For professionals, boat owners, homeowners, and agricultural users, VEVOR provides a full range of submersible, transfer, recirculating, and specialty pumps. With confidence, choose the ideal pump for your application, required flow rate, and power supply.


Utility Pump Types and the Applications They Serve Best


Compared to most other types of fluid management equipment, utility pumps have a wide range of uses. You can choose the ideal pump for your specific water movement problem without sacrificing performance or reliability thanks to VEVOR's lineup, which covers every major pump type and application.


Submersible Utility Pumps for Basement Drainage and Flood Control


Submersible utility pumps are the main tool for draining flooded basements, emptying water-filled excavations, removing accumulated rainwater from low-lying areas around a property, and clearing standing water from crawl spaces. They are designed to run while completely submerged in the water they are moving. VEVOR utility pumps feature sealed motor housings that prevent water from entering electrical components when submerged. They also have thermal overload protection, which automatically turns off the motor if the operating temperature rises over acceptable levels during prolonged pumping sessions. In emergency flooding situations, where the pump may need to run continuously for several hours to remove a significant amount of water, this protection is essential.


VEVOR offers utility pumps with automatic float switch operation, eliminating the need for manual monitoring during slow infiltration events, such as a sump pit gradually filling overnight. The pump turns on when the water reaches a predetermined level and off when it drops to a safe threshold. VEVOR utility pumps can be lowered into confined utility areas, window wells, and narrow sump pits where larger pump housings would not fit, thanks to their lightweight, compact design. Compared to uncoated ferrous metal components that corrode quickly when exposed to standing groundwater, stainless steel or corrosion-resistant plastic impeller and housing construction resists the slightly acidic or mineral-laden water typical in many basement flooding situations, helping extend pump service life.


Transfer Pumps for Fuel, Water, and Chemical Movement


Transfer pumps are designed specifically to move liquids from one container, tank, or location to another. These applications include chemical transfer in light agricultural and industrial settings, water movement between holding tanks and irrigation systems, and fuel transfer between storage tanks and vehicles. Both self-priming centrifugal and positive displacement VEVOR pumps are available, and each is suitable for different viscosity levels and transfer distances. While positive displacement pumps maintain constant flow rates when handling heavier fluids or lifting liquid over a considerable vertical height, self-priming centrifugal pumps effectively handle clean water and thin liquids over moderate distances.


The carrying handles and small size of the portable pumps in the VEVOR utility pumps line make it easy to move between various transfer locations on a farm or property, eliminating the need for a permanent installation when the pump is used for several transient purposes throughout the year. VEVOR pumps' inlet and outlet port sizes match standard hose and pipe fittings, eliminating the need for adapters and streamlining setup in field situations where locating custom fittings is impractical. Fuel-resistant seals and impellers that do not deteriorate or swell when exposed to petroleum products are among the materials VEVOR provides for pumps used in fuel transfer applications. Standard water-transfer pumps cannot safely meet this crucial compatibility requirement.


12V Volt Bilge Pumps and Marine Water Management


Bilge pumps, which automatically remove water that builds up in the bilge from deck wash, rain, minor hull seepage, and spray that finds its way below deck during inclement weather or rough seas, are an essential safety feature on any boat. With corrosion-resistant housings, stainless steel hardware, and sealed motor assemblies that withstand constant exposure to saltwater, bilge water contamination, vibration from marine engines, and hull movement through chop, VEVOR 12 volt bilge pumps are designed especially for the marine environment. Even when the ship is left unattended at the dock, automatic float switch models provide passive bilge management by turning on the pump as soon as water reaches the switch level without the operator having to do anything.


Models of VEVOR 12V bilge pumps have flow rates ranging from 500 gallons per hour for smaller recreational boats to 2000 gallons per hour or more for larger vessels with substantially higher bilge volumes and possible water intrusion rates. With flexible hose outlet routing that can suit the curved and angled discharge channels typical of production boat bilge spaces, low-profile pump housings enable installation in shallow bilge compartments where hull geometry restricts clearance. When doing routine boat maintenance at the dock or on the water, VEVOR bilge pumps' easy-access impeller covers make it possible to remove debris that has passed the intake screen without taking the pump out of its mounting position. This maintenance feature is useful, saving significant time and effort.


Aerator Pumps, Recirculating Pumps, and Condensate Pumps for Specialty Use


VEVOR's utility pumps portfolio includes a range of specialized pump types that handle applications that general-purpose pumps cannot, in addition to the main drainage and transfer categories. By constantly circulating and oxygenating the water in the livewell tank, the aerator pump for boat livewell applications keeps baitfish alive during fishing excursions. This feature prevents oxygen depletion, which quickly kills bait in warm water conditions. To keep bait lively and appealing to target species throughout the fishing day, VEVOR livewell aerators draw water from the lake or river and pump it through the livewell at a controlled rate. This feature maintains water temperatures and dissolved oxygen levels close to ambient levels.


By maintaining constant water flow through closed-loop piping systems that would otherwise lose temperature stability due to static heat loss, recirculating pumps support hydronic floor heating circuits, heating and cooling systems, and hot-water recirculation loops. VEVOR pumps use low-wattage motors that run continuously and silently without incurring significant electricity costs. Condensate pumps are specifically designed to collect and discharge condensate from high-efficiency furnaces, dehumidifiers, and air-conditioning evaporator coils. They do this by pumping the small but continuous volume of water produced by these appliances to a drain location that gravity drainage cannot reach. Compact reservoirs with automatic float switches and warning features on VEVOR pumps notify users when the reservoir fills faster than the pump can discharge, suggesting a possible obstruction in the discharge line before overflow damage occurs.


Choosing a Utility Pump by Job


Use the table below to map a common water-moving job to the pump type that fits it and the one factor to weigh for that job.


Your Job Priority Pick Key Consideration Why It Fits
Flooded basement or pit 120V AC submersible, 4,000+ GPH Inflow rate Removes water faster than it enters so the motor is not left short-cycling
Emptying a rain barrel or pool AC transfer pump, 360 to 1,600 GPH Suction lift Stays dry on the edge and draws the water out through a hose
Fresh water in an RV or boat 12V diaphragm pump, 40 to 100 PSI Battery supply Runs off the house battery and self-primes to hold steady tap pressure
Instant hot water at the tap Recirculating pump, up to 10 GPM Run cost Low-wattage head loops the line continuously without a large power draw
HVAC or furnace drip Condensate pump, up to 33 ft lift Lift height Pushes the small condensate flow up to a drain gravity cannot reach
Irrigating off-grid acreage Gas semi-trash pump, 128 to 422 GPM No mains power A gasoline engine delivers high volume where no outlet is available

Flow Rate and Power Source Considerations for Utility Pumps


Whether a utility pump operates as planned or becomes a source of annoyance the first time it is required depends on two factors: matching flow rate to your actual pumping need and choosing the right power source for your installation area.


Understanding Flow Rate and Head Pressure Requirements


While head pressure describes the pump's capacity to push liquid upward against gravity or through resistance in the discharge line, flow rate, expressed in gallons per hour or gallons per minute, describes the volume of liquid a pump moves under particular test conditions. A pump rated at 1800 gallons per hour at zero head may only provide 900 gallons per hour when moving water 10 feet vertically through a discharge line, since a pump's flow rate reduces as head pressure increases; both specifications must be assessed jointly. For utility pumps in the lineup, VEVOR provides performance curves or minimum and maximum flow rates at specified head heights, giving buyers the information they need to choose a pump that meets their actual flow demand at their installation head height.


Matching the flow rate to the property's worst-case water penetration rate for basement sump and drainage applications ensures the pump can remove water more quickly than it enters during periods of heavy rain without the motor cycling so quickly that it overheats. When time is of the essence, such as when filling an irrigation tank before a planting window closes or transferring fuel to a vehicle before a deadline, flow rate dictates how long a particular volume transfer takes.


Power Source Options Including 12 Volt Portable Water Pumps and AC Models


The two main sources of power for utility pumps are standard 120V AC household current for fixed installations near electrical outlets, and 12V DC from car batteries or marine electrical systems for mobile and marine applications when AC power is unavailable. The 12 volt potable water pump models from VEVOR are intended for use in RVs, camper vans, boats, and off-grid cabins where the 12 volt house battery system is the only available power source. They supply clean drinking water from an onboard fresh water tank to kitchen and bathroom fixtures via the vessel or vehicle's plumbing system.


AC-powered VEVOR utility pumps are suitable for fixed sump pit installations, basement drainage systems, HVAC condensate removal, and any other application where a permanent, hardwired, or outlet-connected pump is the most practical option. Common household circuits power them. During power outages and other emergencies when grid power is unavailable, users who need the same pump to run from either a generator's AC output or a battery bank's DC supply can benefit from dual-voltage compatibility on certain VEVOR utility pump models.


Best-Seller Comparison


Here is how the five most popular products on this page compare side by side.


Product Type Max Flow Power Head / Pressure Material Best For
1 HP Submersible, 4000 GPH Submersible sump 4,000 GPH 1 HP, 110V AC 31 ft head Nylon / fiberglass, IPX8 Highest-flow submersible here; fast drainage of pools and basements
Cast Iron Transfer, 1600 GPH AC transfer 1,600 GPH 1/2 HP, 115V AC 120 ft head Cast iron Only cast-iron body in the five; rugged repeat transfer duty
120V Transfer, 360 GPH AC transfer 360 GPH 1/10 HP, 120V AC 46 ft head Aluminum Alloy Lowest draw with a hose kit; small barrel and aquarium jobs
1/3 HP Submersible, 2450 GPH Submersible sump 2,450 GPH 1/3 HP, 110V AC 30 ft head High Strength Plastic Lighter submersible option; steady pits and slow infiltration
12V Diaphragm, 5 GPM 12V diaphragm 5 GPM 12V DC 40 to 100 PSI adjustable Plastic Pump Body Only DC pressure pump here; RV, marine and food-truck supply

Why Choose VEVOR Utility Pumps?


For marine, residential, agricultural, and industrial applications, VEVOR offers a full line of utility pumps, including 12 volt potable water pumps, 12 volt bilge pumps, recirculating pumps, condensate pumps, and aerator pumps. Every pump offers low pricing, dependable motor protection, and sturdy construction, making professional-grade water management affordable for all budgets. Your pump is ready when you need it most, thanks to VEVOR's trustworthy after-sales support. Choose the ideal pump for your needs right now by browsing the entire lineup.


FAQs


What is the difference between a submersible utility pump and a transfer pump?


The purpose of a submersible utility pump is to remove water from flooded areas by operating while completely submerged. Usually surface-mounted, a transfer pump uses externally linked suction and discharge hoses to transfer fluids between containers or locations.


Can a 12-volt potable water pump be used safely for drinking water?


Yes, as long as the pump has food-grade seals and materials and is expressly rated for potable water use. VEVOR 12-volt potable water pumps are safe for use in fresh water systems in RVs, boats, and off-grid cabins, as they are made from materials approved for contact with drinking water.


How do I choose the right flow rate for a bilge pump?


Depending on the size of your vessel and the possible rate of water intrusion, adjust the bilge pump flow rate. Higher-capacity pumps are required for larger vessels in harsher weather. Generally speaking, larger boats need 1500 gallons per hour or more, whereas boats under 20 feet usually need 500 to 1000 gallons per hour.


Can I use a utility pump as a sump pump in my basement?


Yes, for occasional drainage. A portable submersible utility pump clears a flooded basement well, and float-switch models cycle on their own. For permanent pit duty, a dedicated sump pump sized to your inflow is the steadier long-term choice.


What are the main differences between utility pumps and sump pumps?


A utility pump is a portable, general-purpose tool you move between draining jobs. A sump pump is installed permanently in a pit and wired to run automatically. Many submersible models serve either role, but sump duty rewards a fixed, float-controlled setup.


What should I consider when choosing a high-efficiency sump pump?


Match flow to your worst-case inflow so the motor is not cycling constantly, and check the head rating against your pit-to-drain lift. A float switch, thermal overload protection, and corrosion-resistant construction all cut wasted run time and extend service life.


Which type of pump is more energy-efficient: utility or sump pump?


Neither wins outright; efficiency comes from sizing. A pump matched to its job runs less and draws less. A float-switch submersible only runs when water is present, which is usually more efficient than an oversized unit short-cycling against low inflow.


Are there energy-efficient water pumps suitable for home use?


Yes. Low-wattage recirculating pumps run quietly on standard household current, and condensate pumps draw very little to clear HVAC drip. For drainage, a correctly sized submersible with thermal overload protection avoids the wasted energy of a pump that runs when it should rest.


Can you recommend the best water pumps for large water tanks?


For filling or emptying large tanks quickly, a high-flow unit matters most. A gas semi-trash pump moves up to 422 GPM for off-grid volume, while a 120V AC transfer pump handles tank-to-tank moves where an outlet is close by.


What are the best portable water pumps for camping or outdoor use?


A 12V diaphragm pump is the portable choice, running off a battery to supply taps or a sprayer at adjustable pressure. For larger outdoor draining or irrigation away from power, a gasoline-engine semi-trash pump delivers far higher volume.


Tips & Inspiration