Download VEVOR App 
Get 5,00€ Off 99,00€+ Orders on Your First 3 App Orders
Scan the QR code to download
In every vehicle location and application, VEVOR's vehicle attachments offer a rugged appearance, practical enhancements, and effective protection. Our selection includes key exterior attachment points on your vehicle, including front bumpers and grille guards, skid plates, roof racks, and running boards. VEVOR offers well-engineered vehicle attachments designed for rigorous real-world use, whether you are designing a capable off-road rig, safeguarding a work truck, or enhancing a daily driver's capabilities.
Are you searching for vehicle attachments that, without sacrificing structural integrity or vehicle fitment, actually enhance the protection, recovery capacity, and functional versatility of your truck or SUV? With the correct add-ons, a regular car can become a specially designed vehicle that can confidently navigate challenging road conditions, job sites, and trail obstacles. Every vehicle owner can get a complete upgrade solution from VEVOR's extensive line of vehicle attachments, which includes running boards, bull bars, rear bumpers, and tow hooks.
Each critical area of the vehicle should be addressed with specially designed attachments tailored to its unique requirements to provide effective vehicle protection and functional upgrades. Every upgrade choice is complemented by a device designed for that precise use, thanks to VEVOR's range, which includes front-end protection, rear recovery, underbody shielding, and body access enhancements.
Front bumpers are among the most effective vehicle attachments for enhancing forward protection on trucks and SUVs used in off-road, agricultural, and construction settings, where factory plastic bumper fascias offer little real protection against trail obstructions, animal hits, or recovery loading. With application-specific hardware that provides a safe, rattle-free installation without altering the vehicle's structural components, VEVOR's front bumpers completely replace the original unit by bolting straight to the vehicle's existing frame mounting points.
VEVOR's front bumpers feature a heavy-gauge steel structure that offers impact resistance factory bumpers cannot match, shielding the radiator, intercooler, and front chassis rails from damage during recovery operations and low-speed off-road hits. Many VEVOR front bumper versions feature integrated winch-mount plates that support typical 8,000–12,000 lb electric winches, eliminating the need for a separate winch-mount bracket and combining two crucial off-road modifications into a unified front-end assembly.
Most VEVOR models feature D-ring shackle mounts integrated into the bumper ends, providing rated recovery attachment points and eliminating the need for aftermarket tow hook attachments. For drivers who desire impact protection and a mounting point for additional lighting without replacing the entire factory bumper, Bull Bars offer a more compact front-end protection solution.
Grille guards offer focused protection for the vehicle's front fascia, headlights, and grille without requiring a complete replacement like a front bumper change. To create a steel framework in front of the grille that deflects brush, debris, and animal strike impacts away from vulnerable cooling and lighting components during daily driving and light trail use, VEVOR's grille guards bolt to the factory bumper or directly to the vehicle's push bar mounting points.
In contrast to a complete steel bumper replacement, VEVOR's grille guards feature a tubular structure made of heavy-wall steel, offering significant deflection resistance while maintaining a clean visual profile. Satin black and textured black powder coat finishes are resistant to surface corrosion, stone chip damage, and UV deterioration, even after extended outdoor exposure and frequent off-road use. To connect a recovery winch to a car without a front bumper with an integrated winch plate, winch mounts are specialized vehicle attachments.
To position the winch at the proper height and angle for effective rope deployment during self-recovery and to help other cars on the trail, VEVOR's winch mount plates are designed to attach directly to the vehicle's frame horns or the factory bumper structure. VEVOR winch mount plates' load-rated steel design can withstand the entire pulling load of compatible winches under difficult circumstances without flexing or deforming.
Rear bumpers replace the factory rear fascia with a steel structure that guards against impact damage to the vehicle's tail, tow hitch receiver, and rear chassis during reversing maneuvers, trail obstacles, and small crashes that factory plastic pieces absorb poorly and irreversibly distort. For builds where complete perimeter coverage is the goal, VEVOR's rear bumpers are made of the same heavy-gauge steel as its front bumper options, ensuring consistent protection on both ends of the car.
The VEVOR rear bumpers' integrated hitch receiver openings maintain the standard 2-inch tow hitch compatibility, enabling trailer towing and the use of hitch-mounted accessories without requiring any further adjustments after installation. Many VEVOR rear bumper designs feature rear corner shields to protect the vehicle's tail corners, which are the most vulnerable parts when reversing on a trail or driving in tight spaces.
For vehicles, when a complete rear bumper repair is neither necessary nor possible, tow hooks provide a simpler rear recovery attachment. With grade-rated hardware that preserves the structural integrity of the recovery attachment under full recovery loading, VEVOR's tow hooks bolt straight to the vehicle's OEM frame-mounted tow hook tabs or recovery points.
For any truck or SUV used on rocky trails, forest roads, and rough terrain where exposed underbody components like the engine oil pan, transmission, transfer case, and fuel tank are constantly at risk of impact from rocks, stumps, and trail debris that can cause catastrophic and expensive damage if proper protection is not in place, skid plates are among the most functionally important vehicle attachments.
Depending on the application, VEVOR's skid plates are made of heavy-gauge steel or aluminum alloy. Steel offers the most impact protection for harsh terrain, while aluminum offers a significant weight reduction for builds where unsprung mass is an issue. Instead of concentrating impact forces at specific mounting points during rock strikes, mounting methods use factory underbody attachment points, enhanced by additional hardware, to distribute impact loads across the skid plate structure.
In raised trucks and large SUVs where the factory step height becomes unfeasible after a suspension lift, running boards provide a step surface along the vehicle's rocker panel, significantly facilitating passenger ingress and exit. The non-slip step surface treatments on VEVOR's steel or aluminum running boards provide grip in muddy, icy, and wet circumstances that arise during outdoor work and trail use, where safe footing during vehicle entry and exit is a real safety concern.
Every upgrade will provide the appropriate level of capability for your specific vehicle use, terrain type, and long-term durability expectations, provided you are aware of the available materials and protection ratings across VEVOR's vehicle attachments.
Impact resistance, weight contribution, corrosion resistance, and long-term surface attractiveness are all strongly influenced by the materials used in vehicle attachments under the harsh conditions of off-road and worksite use. The main building materials for VEVOR's vehicle attachments are aluminum alloy and high-strength steel, both of which are suitable for various vehicle uses and performance goals.
For serious off-road use, rock crawling, and agricultural work sites where attachments frequently contact hard objects under heavy loads, high-strength steel construction offers the maximum impact resistance necessary. When assessing suspension capacity and payload ratings, steel's increased density adds weight to the front or rear end of the vehicle. Compared to identical steel designs, aluminum alloy construction delivers up to about 40% weight savings while retaining sufficient strength for everyday workplace applications and mild off-road use.
To provide corrosion resistance that endures through extended outdoor exposure, pressure washing, and trail mud without premature surface degradation or rust bleed at weld points, powder coat finish systems on VEVOR's steel attachments employ multi-stage preparation, including a phosphate treatment and an epoxy primer beneath the topcoat.
When buying vehicle attachments, the most crucial practical factor to consider is proper vehicle fitment. If an attachment does not match your specific make, model, and year, it must be modified, compromising both structural integrity and appearance. To enable customers to verify compatibility before purchase, VEVOR's vehicle attachments are designed to application-specific dimensions, with fitment lists that clearly indicate compatible vehicle models.
VEVOR's bolt-on vehicle attachments can often be installed by mechanically competent owners using common hand tools, using the original mounting points already in place, and the supplied hardware. Due to the weight of components, skid plate and bumper replacements usually require two people to fit safely. When constructing a full vehicle attachment package, start with front protection since front bumpers and grille guards offer the most protective coverage.
Next, add skid plates for underbelly protection, and as the project progresses, add rear bumpers, running boards, and roof racks. For both working vehicle operators who rely on their vehicles daily and recreational off-road enthusiasts, VEVOR's affordable pricing across its entire vehicle attachment line makes developing a truly capable, well-protected vehicle attainable at a cost that fits practical upgrading budgets.
From front bumpers and bull bars to skid plates, running boards, and roof racks, VEVOR's vehicle attachments are built with heavy-duty steel and aluminum for rigorous real-world use and cover every modification position. Building a powerful, well-protected car is simple and inexpensive thanks to precise vehicle fits, long-lasting powder-coat finishes, and low prices. Start your project with confidence by browsing the entire VEVOR vehicle attachments collection now.
VEVOR front bumpers are made to application-specific specifications and are listed by make, model, and year of vehicle compatibility. To ensure proper alignment and mounting-point compatibility, make sure your car's exact year and trim level match the fitment list on the product page before purchasing.
Without drilling or altering the frame, most VEVOR skid plates bolt directly to the stock underbody mounting locations. The supplied hardware and the installation instructions guide the fitment procedure. Depending on the vehicle's trim level and any installed underbody accessories, some applications may require minor bracket modifications for exact alignment.
Indeed, VEVOR running boards are compatible with raised pickups and mount to OEM rocker panel connection points. Make sure the product is compatible with the lift height and rocker panel configuration of your car. Step surface positioning relative to the door sill may be affected by certain lift heights; this should be verified before purchase.
The main powder coat finishes for VEVOR vehicle attachments are satin black and textured black, which are resistant to surface corrosion, stone chips, and UV rays. For owners who prefer a bespoke paint color that complements their vehicle's current exterior color scheme, some models are available with a raw steel primer finish.
