Download VEVOR App 
Get 5,00€ Off 99,00€+ Orders on Your First 3 App Orders
Scan the QR code to download
VEVOR's car audio accessories provide the power, clarity, and connectivity that every in-car listening experience requires, whether you are designing a complete custom car audio setup, upgrading a factory radio system, or adding bass to a daily driver. We provide everyday drivers, audio enthusiasts, and professional installers with a reliable source for complete car audio upgrades. Our range includes under seat car subwoofers, car multichannel amplifiers, car mono amplifiers, CarPlay screens, car audio subwoofers, wireless car stereos, and 4 channel car audio amplifiers.
Do you want to add wireless smartphone connectivity to an older car without replacing the dashboard entirely, or are you sick of flat, lifeless factory audio that doesn't deliver the bass, clarity, and volume your music deserves? The in-car listening experience can be transformed from background noise control to true audio enjoyment with the correct car audio accessories. VEVOR offers the ideal modification for every car and audio objective, from wireless car stereos and CarPlay screens to strong car audio subwoofers and multichannel amplifiers.
The two choices that most directly affect whether a car audio upgrade blends seamlessly into the interior of an existing vehicle or creates installation challenges are component type and installation location. With explicit installation position instructions for each product type, VEVOR's car audio accessories are arranged by component category.
Subwoofers add the physical impact and musical depth that separate a truly satisfying car audio system from one that is just louder than the factory installation by accurately reproducing the low-frequency bass content that factory speakers and even aftermarket full-range speaker upgrades cannot deliver. With shallow-mount driver designs that fit within the typical under-seat clearances of most passenger cars, SUVs, and trucks, without requiring trunk space or custom enclosure fabrication, VEVOR under-seat car subwoofer models are specifically engineered for installation in the constrained space beneath front or rear vehicle seats.
For trunk installations where maximum bass production and low-frequency extension below 35 Hz are crucial, VEVOR's line of car audio subwoofers includes larger 10-inch and 12-inch speaker types in ported and sealed enclosure configurations. From 200 watts for small under-seat versions to 1,200 watts for large-format dual-voice-coil trunk subwoofers intended for high-output systems powered by specialized mono amplifiers, VEVOR's subwoofer range offers peak power handling. Both 2 ohm and 4 ohm voice coil impedance options are available across the range, enabling impedance matching to the mono amplifier's rated stable load for optimal power transfer efficiency without amplifier instability at the selected wiring configuration.
The power source that drives every speaker and subwoofer in an automobile audio system, beyond the output capacity of the factory or aftermarket head unit, is an amplifier. The cleanliness and power of the entire audio system under demanding listening conditions depend on the choice of amplifier class and channel configuration. With power ratings ranging from 500 watts RMS to 2,000 watts RMS at a 2-ohm load, VEVOR's car mono amplifier models are specialized subwoofer amplifiers featuring Class D topology. They offer the continuous low-frequency power output that subwoofer drivers need for precise bass reproduction at high volume levels without thermal shutdown.
With RMS power ratings of 50 to 150 watts per channel at 4 ohms, VEVOR's 4 channel car audio amplifier models power four full-range speakers concurrently with Class AB or Class D topology. This feature covers the entire range from high-output component speaker systems to modest factory speaker replacement applications. In systems that include both speaker and subwoofer upgrades, VEVOR's car multichannel amplifiers in 5 and 6 channel configurations combine full-range speaker channels with a dedicated subwoofer channel in a single chassis, eliminating the need for two separate amplifiers. This feature is a practical, space-saving solution for installers working within the limited amplifier mounting space in most standard passenger vehicle interiors.
CarPlay screens and wireless car stereos enable smartphone integration, navigation, and streaming audio connectivity in cars that are not possible with factory infotainment systems, either because the vehicle is older than modern connectivity standards or because the factory system lacks the wireless pairing and app integration that modern smartphone use patterns require. The CarPlay screen line from VEVOR includes flush-mount double-DIN replacement units that fit into the factory head unit opening for a fully integrated, OEM-quality appearance, as well as plug-and-play portable models that attach to the dashboard via suction or adhesive mounts, without requiring dashboard disassembly.
VEVOR's wireless car stereo models support both Apple CarPlay and Android Auto via wireless Bluetooth, eliminating the reliance on USB cables that can lead to dashboard clutter and cable wear from frequent daily connections and disconnections. From 7 inches on small single-DIN replacement units to 10.1 inches on wide-format double-DIN models with split-screen functionality for concurrent navigation map and media player displays, VEVOR's CarPlay lineup offers a variety of screen sizes. Under real-world driving conditions, VEVOR's premium wireless car stereo models with Bluetooth 5.0 and built-in Wi-Fi maintain stable wireless pairing connections across the entire range of smartphone positions within the vehicle cabin. These, without dropouts, plague older Bluetooth General CarPlay implementations.
The typical situation in which a component is purchased without verifying that sufficient space, power wiring access, and signal routing channels are available at the intended installation location is avoided by planning the installation location before acquiring any automotive audio device. A power wire run from the battery, a ground connection to a nearby chassis bolt, and a signal input from the head unit's RCA output or a speaker-level input adapter are required for under-seat car subwoofers to mount beneath the front passenger or driver seat using the included low-profile mounting brackets. This feature is simple to install, and most skilled do-it-yourselfers can finish it in 2 to 3 hours.
The most time-consuming stage in a complete subwoofer installation is power wiring from the battery down the vehicle's chassis to the trunk for trunk-mount car audio subwoofers in sealed or ported enclosures. Using the included mounting hardware, amplifiers can be mounted to the trunk floor, side panels, or under seat locations. The choice of location is influenced by the amount of flat surface area that is available, the proximity of the amplifier to power and ground connection points, and the availability of sufficient ventilation clearance around the amplifier chassis for heat dissipation during prolonged high-output operation. CarPlay screen portable variants are the easiest car audio accessories to install for purchasers without DIY electrical skills, as they only require a 12V USB power connection from the car's USB port or 12V accessory socket, and a Bluetooth or USB connection to the factory audio system.
A car audio component's power rating and integrated features affect how well it functions in its intended application and how easily it integrates with the vehicle's current electrical and audio infrastructure.
The single most crucial specification literacy skill for any car audio buyer is to understand the distinction between RMS and peak power ratings. This feature is because the peak power figures mentioned in marketing materials represent momentary maximum output rather than sustained continuous power delivery, which determines real-world loudness and audio quality under typical listening conditions. RMS power ratings and peak values are prominently displayed on all VEVOR car audio accessory product pages, enabling precise component comparisons and proper matching between amplifier RMS output and subwoofer or speaker RMS power-handling capabilities.
The second crucial specification pairing is impedance matching between the amplifier and the speaker or subwoofer load. This is because connecting a 4-ohm-rated amplifier output to a 2-ohm subwoofer wiring configuration draws twice the intended current from the amplifier output stage, which can lead to overheating and eventual failure in amplifiers not rated for stable 2-ohm operation. The dual-voice-coil subwoofer models in the range include wiring diagrams showing series and parallel connection options that achieve 2-ohm and 4-ohm final impedance from dual 4-ohm or dual 2-ohm coil configurations. This feature simplifies the impedance calculation that first-time installers find most confusing during a subwoofer system build. Additionally, VEVOR's mono amplifiers clearly state their minimum stable impedance on the product specification panel.
How well the system can be adjusted for optimal sound quality in the unique acoustic environment of a car cabin, and how easily it interfaces with source devices during regular use, are determined by the features built into car audio accessories. VEVOR's multichannel amplifiers feature built-in digital signal processing, including parametric equalization, time alignment, and crossover frequency control. These features enable the installer to account for high-frequency absorption, bass buildup, and acoustic reflections that vary with the interior volume, glass area, and seat material.
The roll-off in low-frequency output that happens with smaller subwoofer enclosure volumes in under-seat and compact trunk installations, where enclosure size is limited by available vehicle space, is compensated for by bass boost controls on VEVOR's mono amplifiers, which enable 0 to 12 dB of boost centered at a selectable frequency between 40 Hz and 80 Hz. One-touch wireless pairing memory automatically reconnects the driver's smart device to the vehicle upon vehicle startup, without requiring manual Bluetooth pairing each time the vehicle is entered, and is one of the wireless connectivity features on VEVOR's CarPlay screens and wireless car stereo models. This feature reduces the daily interaction overhead that wired and manual-pair wireless implementations impose on users during a typical commuting routine.
Under seat car subwoofers, car audio subwoofers, car mono amplifiers, car multichannel amplifiers, wireless car stereos, and CarPlay screens are just a few of the many car audio accessories offered by VEVOR. All of these accessories are built with practical power ratings and useful features at competitive prices. VEVOR offers the ideal part for any car or audio application, whether you are improving a daily driver or creating a unique system. Explore the entire selection and place your order right now.
For optimal bass performance, a mono amplifier delivers all its power to a single subwoofer channel. A four-channel amplifier powers each full-range speaker. The most space-efficient option for a full-system upgrade that includes both speakers and a subwoofer is a multichannel amplifier that combines all features in a single chassis.
Yes, VEVOR's under-seat subwoofers fit under the majority of typical passenger vehicle, SUV, and truck front seats thanks to their shallow-mount driver designs, with mounting depths of 3 to 4 inches. To ensure the subwoofer's claimed height fits within your available under-seat space, measure the clearance beneath your car seat before making a purchase.
Only a 12V USB or accessory socket power connection and Bluetooth pairing to the built-in audio system are typically necessary for portable CarPlay screen variants. Signal wiring and dashboard disassembly are not required. Dashboard removal and installation of power, ground, and speaker wiring are necessary for flush-mount double-DIN CarPlay devices.
