Rather than a single general category, VEVOR's carpets serve four different flooring needs. Designed for boat decks and patios, marine carpet rolls are 6 feet wide, 13 to 52.5 feet long, and come in a 32-ounce cutpile with a waterproof TPR backing. Carpet panels are available in squares measuring 18 by 18, 20 by 20, and 24 by 24 inches. They are sold in packs of 10 to 24, covering 22.5 to 96 square feet. Garage floor pads range from a small 3x5 foot to a full bay 8'10"x22'. Carpet padding rug pads range from 5x7 to 10x14 feet.
Why shop them as a single generic category when flooring a home office, a garage bay, or a boat deck all require separate builds? VEVOR's carpets are neatly divided by job: 24x24-inch peel-and-stick carpet panels for interior rooms, 6-foot-wide black marine carpet rolls up to 52.5 feet for boats and patios, felt-and-rubber padding for cushioning beneath an existing rug, and TPE-backed garage floor pads up to 8'10" by 22' for full-bay coverage.
Because not all VEVOR carpets are meant for the same space or surface, each variety below has a unique backing and set of dimensions.
Every marine carpet roll in VEVOR's range has a constant width of 6 feet and a variable length of 13, 18, 23, 29.5, 30, 36, 39.3, 49.2, or 52.5 feet. These lengths can cover everything from a single boat deck area to an entire dock pathway in a single continuous piece. Compared to a typical interior carpet, the 32 oz cutpile construction has more fiber per square yard.
It is far more resilient to sun, saltwater spray, and frequent foot traffic than household-grade material. Because a boat deck receives far more UV exposure than an indoor floor, we chose the color options—charcoal black, grey, deep blue, and light brown—more for their ability to conceal grime and fading than for their aesthetic value.
The anti-slide backing keeps footing secure even when the surface gets wet, and each roll can be trimmed to match an uneven deck shape. If your deck, patio, or porch is longer than a single 6x13 section and needs one seamless piece rather than several linked strips, marine rolls are the only VEVOR design supplied in continuous length rather than fixed panel sizes.
VEVOR offers three carpet tile sizes: 18x18, 20x20, and 24x24 inches. The 24-inch square is the most popular footprint for covering an entire room without making significant wall cuts. Packs include 10, 12, 20, or 24 tiles per box, which, depending on tile count and size, cover 22.5, 30, 80, or 96 square feet. By matching a pack to your room dimensions, you can avoid ordering a second box for a few leftover square feet.
There are two installation options: cushioned squares come with cushioning already affixed to the underside of the tile, providing underfoot comfort without a separate rug pad, while peel-and-stick tiles have a self-adhesive backing that adheres directly to a clean, dry subfloor.
Peel-and-stick tiles work well for long-term installations over hard floors, but reusable, padded tiles lift back up neatly. Our office carpet panels are ideal for rental apartments or offices with changing layouts. Both types fall under the same modular category of VEVOR carpets designed for do-it-yourself installation rather than professional carpet stretching, and they interlock or butt edge-to-edge for a seamless look once fitted.
Instead of requiring a pad cut from a larger roll, VEVOR's carpet padding comes as standalone rug pads in 5x7, 8x10, 9x12, and 10x14-foot sizes to match standard area rug proportions. The pad's dual-surface construction does more than add softness; a rubber gripper layer on the bottom grips the hardwood, tile, or laminate underneath, while a felt cushion layer on top faces the rug.
Because these rug pads prevent an area rug from bunching, sliding, or crawling on a hard surface during frequent foot traffic- a problem plain felt padding alone cannot solve- the rubber gripper layer is the product's true functional core.
Since the felt side won't harm or discolor a sealed surface as other rubber-only pads do, it suits all finished floor types, even hardwood. To ensure none of VEVOR's carpets or rugs have visible padding protruding above the rug's edge, size each pad 1 to 2 inches smaller than the rug on each side.
Garage floor pads range from a small 3x5-foot mat for one spot beneath the engine bay or the motorcycle to a large 8'10" by 22' containment mats that covers a single-car bay from the rear wall to the garage door.
Between the two extremes are mid-size alternatives at 6.6'x8.5', 7.4'x17', and 7.5'x20', matched to a small car, a larger vehicle, or a truck with some extra room around the corners. What sets these apart from other carpets and rugs is the TPE anti-leak backing, which prevents spills and drips from spreading over the garage floor by preventing water, snowmelt, mud, and oil from seeping through to the concrete beneath.
Because all mats are cuttable, you can cut an almost exact size along one edge to fit around a support post or an uneven bay floor. During the winter months, when garage floors experience the most runoff, the non-slip texture on top maintains solid footing even when the mat is coated in melted snow or standing water.
Although surface fiber gets most of the attention, the backing material determines whether a VEVOR carpet can withstand years of foot traffic, a wet boat deck, or a garage floor.
Cutpile marine material resists matting under frequent foot traffic on a boat deck far longer than a lighter-weight indoor product because the 32 oz weight rating on VEVOR's marine carpet refers to fiber density per square yard, which is heavier than the 20 to 28 oz range typical of indoor residential carpet.
Cutpile construction produces a velvety, carpet-like texture that nonetheless drains water more effectively than a plush pile by cutting individual yarn loops at the top instead of leaving them as closed loops. The waterproof backing layer attached to the underside of each roll is made of thermoplastic rubber, or TPR, replacing the jute or woven backing found on typical indoor carpet with a solid, non-porous barrier that water cannot penetrate.
Because TPR naturally has a higher coefficient of friction against fiberglass and gelcoat than fabric-backed alternatives, it also provides anti-slip hold on wet surfaces. Oz weight and backing material determine whether a carpet can withstand standing water. Even heavy-weight carpets can quickly fail once the backing lets moisture seep through. This lesson applies to all of VEVOR's carpets, not just the marine line.
Although they use different backing chemistries suited to their specific exposure, garage floor pads and front doormats address similar issues by keeping moisture and debris off the floor. VEVOR's garage floor pads use a TPE (thermoplastic elastomer) backing designed for direct contact with automotive fluids. Road salt, engine oil, and antifreeze won't deteriorate or break down a TPE backing like they would a less expensive vinyl.
Instead, VEVOR's front door mats have PVC backing, a material better suited to foot traffic, dirt, rain, and milder exposure than the prolonged chemical interaction a garage floor experiences. While TPE's harder structure holds its shape under the continuous weight of a parked vehicle without permanent compression, PVC is typically more flexible at low temperatures.
This makes it suitable for an entryway mat that people step on directly rather than park on. Both backings are completely waterproof and hose-washable, but choosing the right one prevents VEVOR carpets and mats from deteriorating too soon from exposure to conditions they weren't designed to withstand.
In addition to carpet panels, carpet padding, and garage floor pads for any surface, VEVOR also offers blue marine carpet, marine grade carpet for boats, and waterproof carpet for boats. Each product includes precise measurements and backing specifications for buyers searching for outdoor carpet for boat decks, boat carpet runners, outdoor rugs, door mats, stair treads, or interlocking floor mats. Every VEVOR order includes a warranty and prompt customer service. Look through marine carpets and more right now.
VEVOR marine carpet rolls are available in nine lengths: 13, 18, 23, 29.5, 30, 36, 39.3, 49.2, and 52.5 feet. You only need to choose the length that fits your patio or boat deck because each roll is always 6 feet wide.
Depending on the tile size (18x18, 20x20, or 24x24 inches) and the number of tiles per box (usually 10, 12, 20, or 24), a single box of VEVOR carpet panels can cover 22.5 to 96 square feet.
Choose a rug pad that is marginally smaller for a 9 x 12-foot rug; ideally, it should be 1 to 2 inches smaller on each side.
Indeed, all VEVOR garage floor pads are cuttable. Even if your garage bay contains corners, support pillars, or an uneven design, you can trim the mat along any edge to match its precise shape.
No, TPE and TPR are different types of waterproof backing. VEVOR's marine carpets use thermoplastic rubber, or TPR. Garage floor pads use TPE (thermoplastic elastomer) to withstand heavy car weight and automotive fluids.
