Deals

VEVOR MD40 38.1 mm Electric Magnetic Drill Press Drilling Machine with 11PC HSS Cutter Set Precise Annular Cutter Kit Compact Switchable Evolution 1100W Magnet Force

1100W Copper Motor for High-Speed Portable Magnetic Drill Press Performance

Built around an 1100W copper-wound motor, the VEVOR MD40 portable magnetic drill press delivers steady, high-torque power to cut through the toughest structural steel, iron, and hard metals. Lower-rated motors slow down under heavy load, but the copper winding maintains thermal stability during long drilling sessions. This feature reduces heat buildup and extends its life. Because of this, it is a good choice for job sites that cannot afford downtime.

In a no-load state, the motor's spinning speed of 550 RPM makes it best for annular coring rather than high-speed twist drilling. This feature results in cleaner hole edges and less waste. The rated frequency of 50 Hz and the 230V input ensure that the power drawn from normal industrial supplies remains stable. This motor has the power you need to complete each bore efficiently, whether you are cutting through I-beams or structural plates.

12,000N Two-Stage Electromagnet for Secure Workpiece Anchoring

Holding force is one of the most important performance factors in any magnetic drill press. The VEVOR MD40's two-stage electromagnetic base can provide up to 12,000N (about 2,700 lbs). This electromagnet sticks tightly to ferrous metal surfaces, so there is no drift during the coring process. The hole is cleaner and more accurate, and there is a much lower chance that the tool or workpiece will break.

The solid iron bottom of the electromagnet base makes the most contact with the workpiece surface, distributing the clamping force evenly for a better hold. When setting up on lighter-gauge steel, workers should take into account the material's thickness, as thinner metal surfaces will generate less holding force. The 12,000N rating gives you a generous safety margin for normal structural tasks, keeping the drill press firmly in place from start to finish.

11-Piece HSS Cutter Set for Versatile Coring Diameters

With 11 high-speed steel (HSS) hollow coring bits in sizes of 12mm, 13mm, 15mm, 16mm, 18mm, 20mm, 21mm, 23mm, 24mm, 26mm, and 27mm, the MD40 comes ready to use. This range covers the most common hole sizes used in steel fabrication, equipment installation, and structure assembly, so you do not have to buy extra bits. There is a positive, non-slip link between each cutter and the 3/4-inch (19.05mm) Weldon shank tool holder.

A rustproof stainless-steel cooling pot and a pilot pin are included. The pilot pin does two things: it centers the cutter on a pre-punched mark before the annular cut starts, and it helps insert and remove bits between operations. This kit comes with everything you need to start coring right away, so the MD40 is a useful, ready-to-use option for contractors who need a fully set-up portable magnetic drill press.

Double Dovetail Rail Design for Rigid and Durable Operation

The double dovetail rail system on the MD40 makes the drill column significantly more rigid than single-rail designs. This two-rail design lowers lateral flex during the cutting stroke. This feature immediately leads to more consistent hole geometry and a longer cutter life. The dovetail shape also makes it more resistant to wear, so the motor carriage and column can maintain tight tolerances even after heavy use in tough conditions.

The three non-slip crank handles on the feed mechanism allow the user to apply steady, controlled downward pressure without hand fatigue. The body has an ergonomic grip handle that makes it easier to use and safer to move between positions on big pieces of work or between job sites. These design choices show that the machine was built to be used professionally over the long term, not just for light jobs once in a while.

Portable Magnetic Drill Press with 40mm Bore Capacity and 125mm Depth

The MD40 can drill holes up to 125 mm (5 inches) deep and 40 mm in diameter, covering the full range of hole sizes commonly required in structural steelwork and industrial fabrication. This portable magnetic drill press weighs only 13.6 kg (30 lbs), so one person can move it across a workpiece or carry it from one work area to another without mechanical assistance.

The small size does not mean less functionality. The MD40 fits into current toolboxes without extra adapters because it uses a Weldon shank tool holder and works with standard 3/4-inch annular cutters. It is especially good for on-site structural work where a floor-mounted drill press is not possible, and accuracy cannot be compromised due to its depth capacity, bore diameter, and lightweight design.

Multi-Industry Compatibility for Steel Fabrication and Construction Use

With its advanced design, the VEVOR portable magnetic drill press can handle the toughest jobs in a multitude of industries. This machine is perfect for shops that work with steel, shipbuilders, bridge builders, railway makers, and teams that install wind turbines because it reliably and accurately cuts holes in structural steel. It works just as well when placed flat on a steel plate or horizontally on a vertical beam, thanks to its magnetic base and portable design.

The MD40 works well for more than just heavy industry. It is also great for building power plants, installing general equipment, and use in home workshops. With its powerful electromagnet, 1100W motor, and full HSS cutter kit, this machine can do jobs that would normally need several tools or expensive fixed equipment. The MD40 delivers professional results in all these settings for any user who needs a portable, self-contained magnetic drill press.