Download VEVOR App 
Get 5,00€ Off 99,00€+ Orders on Your First 3 App Orders
Scan the QR code to download
Light kits, blades, motors, pull chains, capacitors, remote controls, and light covers are all parts that VEVOR makes for ceiling fans. These parts help the fan run well and look good. VEVOR's ceiling fan parts are compatible with a wide range of fans and are easy to install in both homes and light commercial settings. This is true whether you're replacing a broken part or upgrading an older unit.
Is your ceiling fan making strange noises, wobbling, running slowly, or just looking old? The right ceiling fan parts will fix the problem without buying a new one. You can find all the replacement parts for your ceiling fan at VEVOR. They have everything from warm LED light kits to pull chains, capacitors, and blade sets. This way, you can figure out what's wrong, order the part, and get your fan working right again.
Most of the time, a single broken or worn part is to blame for ceiling fan problems. It's easy to figure out what's wrong with a ceiling fan if you know what each part does. Plus, replacing just one part is much cheaper than replacing the whole fan.
People often replace ceiling fan light kits because they are easy to see, can change a room's ambiance, and wear out faster than mechanical parts. The brushed nickel hardware on VEVOR's ceiling fan light kits comes in one-light, two-light, three-light, and four-light configurations. All of them produce warm 3000K LED light at 750 lumens.
The quickest way to improve the look of an existing fan is to replace its light kit. If the current light fixture is broken, dim, or yellowed, it only takes about 30 minutes to replace it with a new ceiling fan light kit. VEVOR's light kits connect to standard fan wiring and use pull-chain operation, so you don't need to rewire or buy a smart switch.
For bedrooms and small rooms, use one or two-light ceiling fan light kits. For standard living rooms, use three-light kits. For larger rooms where the fan's lighting needs to fill the room, use four-light kits. Cloud-white and frosted milk-glass shades evenly spread light, eliminating glare in all settings.
Ceiling fan blades are mechanical parts that affect how well the fan moves air and how stable it is during operation. A cracked, bent, or missing blade throws off the fan's rotational balance, which causes the wobble that signals blade damage. If you don't fix it, it will make noise, reduce airflow, and put a lot of strain on the motor over time.
The new ceiling fan blades should be as close as possible to the original set's pitch angle, length, and weight distribution. When you mix up blades from different sets, you get the same imbalance problem that the replacement was supposed to fix. Before you buy new ceiling fan parts, make sure the blades' length and pitch match those of your existing fan.
If a blade is damaged, replacing the set is also a good way to upgrade. Changing the blades from plastic to wood-finish or metal entirely changes the fan's look without affecting the motor or wiring. Blade style significantly affects how the entire fixture appears in rooms where fans are visible, such as living rooms, bedrooms, and dining rooms. One of the few parts of a ceiling fan that can be replaced for both functional and cosmetic reasons is the blades.
Ceiling fan motors and capacitors are the electrical and mechanical core of the unit. When these ceiling fan parts fail, the fan may stop running, run at reduced speed, or hum without spinning. Distinguishing between a motor failure and a capacitor failure matters because they require different replacement parts and carry significantly different costs.
Capacitor failure is far more common than motor failure and produces a specific symptom: the fan hums when switched on, but the blades don't turn, or the fan runs at only one speed regardless of the control setting. Ceiling fan capacitors are inexpensive ceiling fan parts that are relatively straightforward to replace: disconnect power, match the microfarad rating exactly, and reconnect.
When the motor fails, it stops working completely, no hum, no spin, and no response. Replacing the entire motor is more complicated and requires checking the motor frame size, shaft diameter, and mounting to the existing fan housing. For older fans, if the motor costs close to a new unit, consider whether it's better to replace the whole thing or get a new motor as a separate ceiling fan part. Motor replacement preserves the whole fixture for newer fans or models that have sentimental or design value.
Ceiling fan light covers, pull chains, remote controls, and capacitors are small parts that can be very frustrating when they break, but they are also very easy and cheap to fix. Pull chains on ceiling fans break at the base where they connect to the switch housing. It usually happens when they are pulled hard over and over again. Replacement pull chains are ceiling fan parts that can be swapped out right away. They let you switch the speed and the light back on without any wiring.
There are a few reasons why ceiling fan remote controls don't work. Some of these are dead receiver modules, signal interference or pairing issues, or just battery and pairing problems. Replacement remote controls for ceiling fans must match the frequency of the fan's receiver, or come with a universal receiver kit that replaces the one already installed. Check whether they work together before you order.
The glass shades, globes, or diffusers that sit over the bulb positions on ceiling fans can crack or discolor over time, especially with heat cycling. For a very low cost, replacement covers can completely change the look and feel of the fixture's light. These are the easiest ceiling fan parts to get to if you want to give the fan a quick visual update without messing with its electrical or mechanical systems.
The most common mistake people make when buying ceiling fan parts is ordering the wrong ones. However, this situation can be easily avoided if you gather the right information before you buy.
The compatibility of ceiling fan parts depends on several factors that vary widely across fan brands and models. These include canopy size, blade-arm mounting pattern, motor shaft diameter, capacitor microfarad rating, and type of light kit receiver. If you get any of these wrong, the part won't fit, work, or balance correctly.
The model number of your fan is usually printed on a label inside the canopy or on the motor housing. The model number is the best way to ensure that the parts of a ceiling fan, such as the light kits, blades, and electrical components, will work together. If the label is missing, take a picture of the part's size and markings before you order a new one.
The mounting interface is especially crucial for ceiling fan light kits. Most home fans use a standard ball-and-socket or threaded fitter, but some companies use proprietary connections that work only with their ceiling fan parts. For maximum compatibility, VEVOR's ceiling fan light kits use standard connection types.
Deciding when to replace individual parts of a ceiling fan rather than the whole fan is a practical and financial decision that depends on the fan's age, the cost of the broken part, and the availability of compatible parts.
If your ceiling fan is less than five years old, it almost always makes sense to replace individual parts. Ceiling fan parts like light kits, pull chains, blades, and capacitors are all inexpensive and can make your fan work like new again for a lot less than buying a new one. If the fan is part of a matched set or has design value, you might want to consider replacing the motor, even if it's not very old. For fans over 10 years old, the availability of parts is the main problem.
The original manufacturer may no longer have any of the older ceiling fan parts, such as proprietary blades, specialized motor housings, and receiver modules that are no longer made. Some of these gaps can be filled with universal replacement parts for ceiling fans, but not all of them can be filled with a generic part that fits the motor and maintains blade balance. VEVOR's ceiling fan parts range makes that choice easier by offering compatibility with a wide range of fans and reasonable prices.
VEVOR ceiling fan parts include everything you need to repair a fan, including light kits, blades, motors, capacitors, pull chains, remote controls, and light covers. They work with a wide range of fans and are easy to install. Don't put up with a fan that wobbles, is dim, or doesn't work. Look through VEVOR's full selection of ceiling fan parts to find what your fan needs and get it back to full performance today.
Look for the model number on your fan's motor housing or inside the canopy. Before you place your order, use it to double-check the blade length, the capacitor rating, and the type of light kit receiver. Most VEVOR light kits use standard connection types that work with most home fans.
It is almost always a bad capacitor. The capacitor starts the blade motor and controls its speed. If it breaks, the motor gets power but can't turn. Ceiling fan capacitors are cheap and easy to replace; make sure the microfarad rating matches the one you already have.
Yes, but it's not a good idea. A single replacement blade that doesn't match the weight and pitch of the other blades exactly will throw off the rotation, making the motor work harder and causing wobble. To get the right balance, change the blades as a full set.
No, VEVOR ceiling fan light kits work with standard fan wiring and use a pull chain to control them. You don't need to rewire, use smart switches, or hubs. Installation is easy and direct if your fan has a port for a light kit receiver.
A cracked or warped blade, an unbalanced blade set, or a loose screw that holds the blade arm in place are the most common causes of wobble. Loose hardware is the easiest problem to fix. If tightening doesn't work, check the blades for damage and replace the set if any of them are clearly bent or broken.
