Select the country/region, language, and currency you prefer for shopping.

Generator Parts

Customer Rating
5 stars only
4 stars and up
3 stars and up
2 stars and up
1 star and up
In Stock
Pickup
Black Friday

We couldn't find a match

Please try with other options or clear your filters.

You May Also Like
Recently Viewed

Results for  Generator Parts

Generator accessories are the supporting equipment that make a portable or standby generator safe to connect and ready to use. They carry the generator's electrical output to the appliances, inlet boxes, or transfer switches that draw on it, delivering high amperage across a distance without overheating or dropping voltage. Others shield the unit from rain, sun, and dust while it sits idle, so its engine and electrical parts last longer. Rated to match a generator's amperage and dimensions, these accessories turn a bare power source into a dependable, weather-ready system you can run during an outage or on a jobsite.


The range breaks into a few clear types. Generator cords are the direct link from the unit to an inlet box or transfer switch, rated for 30-amp or 50-amp service with twist-lock or straight-blade connectors. Generator extension cords add reach, carrying heavy loads 25 to 100 feet so the generator can sit well away from the building. Generator covers protect the idle unit from rain, UV, and dust, sized to fit everything from small inverter units to 12000-watt dual-fuel generators. Browse the complete generator accessories line to pair the right parts. Typical uses are powering a jobsite, running appliances during an outage, connecting an RV, and storing a unit safely between seasons.


Five things decide what you need:


  • Amperage rating: match the cord to your generator's maximum output; a 30A unit needs a 30A cord and a 50A unit a 50A cord, never lower.
  • Connector type: the plug and receptacle (L14-30, 14-50, CS6364, or straight-blade 6-50) must match your generator outlet and the inlet it feeds.
  • Wire gauge: heavier gauge (a lower AWG number) carries more current with less voltage drop, which matters most on long runs.
  • Length: pick enough reach to place the generator safely away from living space, without so much excess that voltage drops.
  • Cover fit: measure the unit including handles and outlets, and match a cover size that seals without gaps or stretching.

Compare the full generator accessories range to match amperage, connector, and fit to your unit, or go straight to weatherproof covers if protecting an idle generator is the priority.


Generator Accessory Types at a Glance


The range splits into three jobs, cords that transfer power, extension cords that add distance, and covers that protect the unit, compared below.


Type Primary Role Key Spec to Match Typical Range Selection Note
Generator cords Link the generator to an inlet box or transfer switch Amperage and connector type 30A to 50A; 15 to 50 ft The direct, load-bearing connection from unit to panel
Generator extension cords Add distance between generator and load Wire gauge over the run length 25 to 100 ft For siting the unit safely away from the building
Generator covers Shield an idle unit from weather Enclosure dimensions or wattage class Fits units up to 12000W Guards the engine and electrics between uses

VEVOR Generators Accessories for Safe Power, Storage, and All-Weather Performance


Are you looking for a sturdy generator cover to shield your investment from the weather or dependable generator cables to securely connect your appliances? Whether you are managing a construction site, preparing for hurricane season, or maintaining a standby home generator, VEVOR's generator accessories are designed to withstand harsh conditions. To increase performance, guarantee safe operation, and keep your generator ready when you need it most, choose the appropriate accessory.


Generators Accessories by Type: Cords and Covers Built for Every Setup


Knowing what your system truly requires is the first step in choosing the appropriate generator accessories. VEVOR offers a targeted, well-designed range of cords and covers that meet the demands of outdoor, commercial, and residential power applications without sacrificing quality.


Generator Cords: Safe, High-Capacity Power Transfer for Any Application


As the vital connection between the output of your generator and the appliances or transfer switches you rely on, generator cords are the foundation of any portable power system. There are significant safety issues associated with a poorly rated or damaged cord, including overheating, tripped breakers, and the risk of electrical fires. The heavy-gauge copper wiring, molded connectors, and thick insulation jackets used in VEVOR's generator cables enable them to safely and effectively handle high amperage loads.


L14-30, L14-20, and CS6364 twist-lock designs are just a few of the popular generator outlet types that VEVOR generator cables come in. From compact portable units to massive standby generators, these connectors are rated for both 30-amp and 50-amp service. VEVOR's generator cables provide the current capacity and connection dependability your arrangement requires, whether you are powering a distribution box on a construction site or connecting directly to a transfer switch panel. Because each cord is UL-listed and designed to endure the mechanical strain of frequent usage, coiling, and exposure to the elements, they are a reliable long-term investment for any generator owner.


Generator Extension Cords: Reach Further Without Sacrificing Safety


Generator extension cords are crucial in situations where standard generator siting frequently places the unit far from the appliances or outlets it needs to power. Generator extension cords, unlike regular household extension cords, are designed to carry much heavier electrical loads over longer distances without risking heat accumulation or voltage drop. This particular need is taken into account in the design of VEVOR's extension cords.


The thick, flexible outer jackets of VEVOR extension cords are essential for outdoor and seasonal use because they prevent cracking in cold weather and maintain their pliability in hot weather. These cords, available in lengths of 25 to 100 feet, let you place your generator at a safe distance from residential areas while still powering your connected devices. Even in damp situations, the weather-resistant, molded plugs on both ends provide a safe, waterproof connection. VEVOR extension cords provide the length, capacity, and safety ratings necessary for homeowners who need to run power from a garage-stationed generator into their home or contractors overseeing multi-point power distribution throughout a sizable jobsite.


Generator Covers: All-Season Protection for Your Power Investment


A generator is a significant investment, and exposing it to rain, UV light, dust, and debris between uses shortens its lifespan and accelerates wear. Generator covers offer an easy-to-use, reasonably priced layer of defense that keeps your machine dry, clean, and operational at all times. Heavy-duty polyester with waterproof coatings and reinforced seams is used to make VEVOR's generator covers, which are made to withstand seasons of outside exposure.


VEVOR generator covers come in a variety of sizes to accommodate big dual-fuel units, mid-size portables, and small inverter generators. Elastic bases and adjustable drawstring hems guarantee a secure, wind-resistant fit that will not blow off during storms. Breathable vent panels minimize internal condensation, shielding your generator's electrical components from moisture damage even when covered for extended periods. UV-resistant exterior fabric prevents fading and material degradation from prolonged sun exposure. A well-fitting VEVOR generator cover is one of the most useful generator accessories you can add to your system, whether you store your generator outside year-round or move it around a lot in an open truck bed.


Matching the Right Accessory to Your Generator Model and Power Output


Not all generator accessories are interchangeable, and choosing parts that do not match your generator's output rating may result in performance issues or safety risks. It is crucial to compare the specifications for each accessory with your generator's wattage, amperage rating, and physical dimensions before buying generator cords, extension cords, or covers. With clearly labeled product specs throughout its whole accessory array, VEVOR simplifies this process.


When using cables, make sure their amperage rating is at least equal to the maximum output amperage of your generator. A 30-amp cord is required for a 30-amp generator; a lower-rated cord is never acceptable. Measure your unit's length, width, and height for generator covers, including any handles or outlets that protrude from the housing. Customers can choose a cover that fits snugly, without stretching or creating gaps, with VEVOR's size guide. Before making a purchase, spend a few minutes confirming compatibility to ensure your generator's accessories function as intended and provide the long-term protection and connectivity your setup needs.


Which Cord for Which Power Setup


Amperage is only half the match; the connector style has to fit both your generator outlet and what it feeds, so this table pairs common setups with the right configuration and the gauge point to check.


Your Power Setup Amperage Needed Common Connector What to Check
Small portable generator (about 3500 to 4000W) 30A L14-30 twist-lock (4-prong) 10 AWG is enough for runs up to about 50 ft
Large portable or dual-fuel (7500W and up) 50A 14-50 or CS6364 locking Step up to 6 AWG so heavy loads do not drop voltage
RV hookup 50A 14-50P to SS2-50R, or bare wire to hardwire Confirm the RV inlet style before buying
Welder or 240V power tool 30A or 50A Straight-blade 6-50 pair Use a straight-blade cord, not an RV twist-lock
Transfer switch panel 30A or 50A Twist-lock (L14-30 or CS6364) Match the panel inlet exactly, not just the amperage

Compatibility and Weather Protection: Generators Accessories That Last Through Any Condition


The best generator accessories are designed to run dependably under challenging conditions, withstand frequent use, and adapt to changing seasons. VEVOR ensures compatibility with a variety of generator brands and reliable operation, regardless of the conditions you encounter, by designing its accessories with real-world environmental conditions in mind.


Weather-Resistant Construction in Generator Cords and Covers


Rain, snow, UV rays, and temperature fluctuations can damage outdoor power equipment and compromise poorly made accessories in a single season. SJTW-certified thermoplastic material, specifically designated for outdoor, wet-location use and maintaining its flexibility at temperatures well below freezing, is used to jacket VEVOR's generator cords. This means that during winter storm operation, when dependable generator power is most important, your generator extension cords will not stiffen, fracture, or lose their protective integrity.


VEVOR generator covers are made of 600D polyester fabric with a water resistant interior coating. While the outer fabric resists abrasion from wind-driven debris, this dual-layer design stops water penetration. During installation and removal in windy conditions, reinforced stress points at handles and corners help prevent tearing. The breathable vent design keeps stored moisture from generating a corrosive environment inside the cover for customers in high-humidity or coastal areas. VEVOR's weather-ready generator accessories are designed to withstand any situation, whether you are safeguarding a backup generator during a New England winter or a portable unit during a Pacific coast wet season.


Wide Brand Compatibility Throughout VEVOR's Range of Generator Accessories


When buying generators accessories, one of the most common concerns is whether a cord or cover will fit or function with a specific generator brand. VEVOR ensures wide compatibility with the most popular residential and commercial generator manufacturers, including Honda, Champion, Westinghouse, DuroMax, Generac, and more, by designing its accessories to industry standards.


A VEVOR L14-30 generator cord will attach correctly to any generator and transfer switch that uses the same outlet standard because generator cords use standardized NEMA twist-lock and straight-blade configurations that are consistent throughout the generator industry. Customers can precisely match their unit, regardless of brand, because generator covers are available in small, medium, large, and extra-large sizes, with specified dimensional ranges listed for each. Additionally, VEVOR helps customers choose generator accessories with complete confidence by offering thorough compatibility assistance through product descriptions and customer support. VEVOR is a useful one-stop shop for accessories, replacements, and upgrades for your entire power equipment setup, thanks to its wide compatibility.


Best-Seller Comparison


The best five cords in the category line up below in page order by the specs that decide fit: amperage, length, gauge, and connector configuration.


Product Amperage Length Wire Gauge Connector Configuration Rated Voltage Best For
Welder Extension Cord, 30A 50 ft 30A 50 ft 10/3 AWG NEMA 6-50P welder plug 250V Only 30A cord here; welders and 240V tools on a 6-50 plug
Generator Extension Cord, 50A 50 ft 50A 50 ft 6 AWG 6-50P to 6-50R straight-blade 250V Highest-rated straight-blade cord (12500W); heavy welders and tools
RV Camp Power Cord, 25 ft 50A 25 ft 6/3 + 8/1 AWG 14-50P to bare wire 110V Shortest bare-wire cord; hardwiring a panel or inlet close by
RV Camp Power Cord, 50 ft 50A 50 ft 6/3 + 8/1 AWG 14-50P to bare wire 110V Same bare-wire hookup with double the reach
Locking Generator Power Cord, 50 ft 50A 50 ft STW 6/3 + 8/1 AWG 14-50P to CS6364 twist-lock 125/250V Only twist-lock CS6364 end; secure generator-to-inlet runs

Why Choose VEVOR Generators Accessories?


From high-amperage generator cords and long-reach generator extension cords to all-weather generator covers designed for year-round protection, VEVOR provides a full range of generator accessories. Every product is made with materials and ratings that withstand harsh environments and frequent use, meeting real-world performance requirements. VEVOR makes it simple to safeguard and maximize your power setup with its affordable prices, solid after-sales service, and wide compatibility with key generator brands. Get VEVOR generator accessories right now.


FAQs


What amperage rating should my generator cord have?


The maximum output amperage of your generator must be equal to or greater than that of your generator cord. A 30-amp cord works well with most portable generators. Large standby or dual-fuel units often require a 50-amp wire. Avoid using short cords, as they pose a significant risk of overheating and fire.


Can I use a standard extension cord with my generator?


No, the high amperage generated by generators is incompatible with standard household extension cables. To guarantee safe, effective power delivery without voltage drop or heat accumulation, always use specially designed generator extension cords with the appropriate gauge and outdoor-rated insulation.


Will a VEVOR generator cover fit my specific generator brand?


With a wide range of dimensions, VEVOR generator covers are available in small, medium, large, and extra-large sizes. The majority of well-known manufacturers, including Honda, Champion, Generac, and Westinghouse, are compatible with them. Before making a purchase, always compare the mentioned dimensions with the measurements of your device.


How do I store my generator cords properly between uses?


To prevent kinking the internal wiring, coil generator cords loosely in wide loops. Keep them out of direct sunlight and in a dry, protected place. Steer clear of tight wrapping around the generator itself because the insulation jacket may eventually deteriorate from frequent, abrupt bending.


Where can I buy reliable generator supplies online?


You can buy them here. VEVOR stocks a full online range of generator cords, extension cords, and covers, each UL- or ETL-listed and rated for outdoor use, with clear specs and after-sales support. Browse the generator accessories category to match parts to your unit and order directly.


How can I find compatible accessories for my generator model?


Check three things against your generator: its maximum output amperage, its outlet type (such as L14-30 or 14-50), and its physical dimensions for a cover. Match each to the accessory's labeled specs. VEVOR lists these on every product, and support can confirm a fit before you buy.


What are the most essential accessories for portable generators?


Three cover most needs: a correctly rated power cord to connect the unit to your inlet or transfer switch, a heavy-duty extension cord to place the generator safely away from the building, and a weatherproof cover to protect it between uses. Add adapters only if your inlets differ.


What are the common types of generator parts available?


The three staples are generator cords that link the unit to a panel or inlet, generator extension cords that extend reach over distance, and generator covers that shield an idle unit from weather. Cords vary by amperage, gauge, and connector; covers vary by size and fabric.


Tips & Inspiration