VEVOR 7x14 tommers metalldreiebenk 50-2500 rpm 550W minibenk dreiebenk 0,75 HK Fresemaskin med variabel spindelhastighet for minipresisjonsdeler bearbeiding av nylonutstyr

Great bit of kit. Haven’t used a lathe in 50 plus years and have made a couple of bits in the first few days..

item arrived undamaged in wooden crate, many screws had worked loose or fallen out but all were in the box. could have came wish a detailed operators manual. But one is available on line to down load. Also a spares list for items such as spare belt etc. as cant find a spare belt to fit if it does break, there is a YouTube tutorial for machining pulleys for a vee belt, which I will be doing, but some mods will have to be made for the motor adjustment. The cutting tools are reasonable, but a set of replaceable tipped tools were obtained form Ebay for £25. Too sum it up a good item for the money, reminds me of my apprenticeship days at Ford Motor Company.

Very happy with the lathe , as soon as I unpacked I checked motor mounts and gears to ensure all tight and lined up , also fitted 3 pin UK plug as it comes with euro plug with no earth . The reason for all this was I did quite a bit of research before I bought and found all the problems that people have had , I've saved myself a lot of work down the line just by doing a few pre checks . My advice would be to anyone buying do your YouTube vids it will give u a good heads up . Tools also bought and quick change holder so will fit these then get some projects on the go .

It's a Chinese mini lathe. There is going to be slop on the slides. You will have to adjust many things and take care of this machine. My tailstock was so poorly made that I had to take it into work where I have a full sized Bridgeport mill and mill down the V groove a bit. The cross slide had WAY too much slop in it, and the cuts would WILDLY vary, and I've had to tighten mine a decent bit so that that slop is gone. I have no real complaints about the carriage. The motor makes some noticeable noise, but it's just a very audible humming, nothing too egregious. I run mine in my apartment and try to be conscious of the noise, I think it is an acceptable volume. Unless you intend on doing a lot of work to this thing, don't go into this expecting to be cutting up steel like a pro. This lathe is GREAT for softer materials like aluminum, brass, etc, but it does NOT like steel. After many adjustments, lots of work, it's still a pain to get good cuts out of any sort of steel rod on this lathe. Seriously, I would avoid this if you are going to be mostly turning steel. The machine works great, just be mindful of how you're using it. The lathe fit great on my workbench, and bolted down to the wood so it's fairly stable. If you're looking for something to go in the corner of your garage on a tool bench, this is a good option.

Arrived about a month ago,I’ve been out of town and busy with work,I pulled it out of the crate yesterday,it was well packaged, I plugged it in and tried the controls , it worked great,very excited to use it, I put in a small piece of aluminum I had 3/4” round, put a tool in and started to turning it, I activated the auto feed,it started working its way down and I saw a flash from the box with the electrical knobs,, I unplugged it ,fuse was blown and I could smell burnt , I removed the box ,there’s only 4 screws holding it on, and noticed some blackened components on the motherboard, I’m sure its toast now, I left a message with the seller,waiting for a response, I think the return date is past by a couple days,but I’m really hoping maybe they could send me another motherboard or something, It’s a large expense, just because I didn’t have a chance to examine it as soon as it arrived, I hope seller won’t leave me screwed out of $700 UPDATE: the seller contacted me they contacted the manufacturer and are going to send me a replacement motherboard, I will update again if this happens, I really hope so UPDATE: I emailed the Seller through Amazon,told them the issue. I just arrived home from another extended work project to find a package from them, It had been delivered by DHL, it was a complete mother board (whatever that thing is). So I am very pleased and impressed with the after care from the seller. Thank you BestEquip👍 UPDATE,the motor started to smoke while working some aluminum,I shut down to let it cool down, When I restarted it,it was making a clunky noise and stopped, I guess it’s toast, I read somewhere that these are only good for about 3 years,it’s only been 2,and sometimes I don’t use it for months, Now I have to spend $150.00 on a new motor, I know it’s Trudeau’s fault,not sure how,but it seems like one of his sneaky tricks 😠

A good purchase if you are prepared to invest some time to partially disassemble, clean, lubricate and put it back together. I knew what I was buying, but it was even dirtier than I expected, hence the 4 stars. Can do plastics, brass, aluminium. At really slow feedrates can do steel, but I would not recommend this in case that is your primary application. Also be prepared to spend up to another 100 quid on toolposts, maybe a 4-jaw chuck, tools etc.

Affordable

I’m satisfied with this product the lack of a proper manual and wiring diagram is a letdown it took me a while to get proper support when I got the right department support was great

Výborný pomocník pro modeláře. Výroba malých součástí. Je nutné dokoupit kvalitní řezné nástroje, hlavičky pro upnutí vrtáků.

Perfect size for the projects I currently do. Very easy setup, low noise level. Quality is very good.