Download VEVOR App 
Exclusive 5,00€ off for your first three orders on the App.
Scan the QR code to download
PVC fittings from VEVOR provide dependable, leak-free pipe connections for a variety of commercial, residential, and irrigation plumbing uses. Whether you require PVC water pipe fittings for a pressurized supply line, PVC plumbing fittings for a kitchen or bathroom drainage system, PVC fittings for plumbing repairs and renovations, or PVC pipes fittings for an outdoor irrigation layout, VEVOR offers well-built options for long-lasting installation performance. Discover a wide variety of pipe sizes, fitting types, and application combinations that are appropriate for each type of plumbing project.
Are you searching for fittings that attach consistently, adhere to standard pipe dimensions without modification, and last years of temperature cycling and pressurized water flow without surface deterioration or joint failure? A plumbing installation that functions flawlessly for decades or one that develops leaks at connection points within the first season of use depends on the choice of PVC water fittings. Every installer can find the ideal fit for their project thanks to VEVOR's range, which includes multiple pipe sizes, fitting geometries, and application ratings.
The two requirements that determine whether a PVC fitting correctly connects the pipes in a system and directs flow in the necessary direction and configuration are pipe size compatibility and fitting geometry. Every standard pipe diameter and system layout need is addressed by VEVOR's precisely dimensioned PVC fittings.
Common residential and light commercial plumbing sizes range from 1/2 inch to 4 inch nominal pipe diameters. PVC fittings are made to standard nominal pipe sizes that match the outside diameter of the pipe to which they are intended to attach. When small-diameter, high-pressure lines are the conventional layout, half-inch and three-quarter-inch plumbing fittings are suitable for compressed air distribution systems, irrigation laterals, and potable water supply lines.
Main supply lines, larger irrigation zone headers, and light commercial water distribution applications where higher flow volume necessitates a larger pipe cross-section than the smaller residential sizes provide are served by one-inch and 1-1/4-inch fittings. Main drain lines, sewer connections, large irrigation mains, and commercial plumbing systems that require larger pipes and fittings for gravity drainage or high flow use two- to four-inch PVC water pipe fittings. PVC fittings from VEVOR are available in the full standard size range, and each product has a clearly stated nominal pipe size, allowing customers to match the fitting to their current pipe diameter without any measuring uncertainty.
A PVC fitting's geometry dictates both the connection arrangement it establishes between the pipes it joins and how it controls flow inside the pipe system. Elbow fittings are the most widely used fitting type in any plumbing layout where the pipe run must change direction to avoid structural elements, follow wall and floor angles, or transition between horizontal and vertical pipe runs. They redirect pipe runs at specified angles, 90 degrees for right-angle direction changes and 45 degrees for gentler angled transitions.
When a supply or drain system needs to serve several locations from a single pipe run, tee fittings are used to make a three-way connection that divides or combines flow between a main run and a branch line. To expand pipe runs and repair damaged pipe sections, cut out the damaged section and couple in a new length of pipe using coupling fittings, which connect two pipes of the same diameter end-to-end. Reducer fittings link pipes with varying diameters, enabling a system to switch between pipe size classes when available pipe sizes or flow volume needs change between installation parts. For any plumbing configuration, VEVOR's PVC pipe fittings offer all four fundamental geometric types in a variety of sizes.
In addition to geometry, fittings come in a variety of connection types that dictate how the fitting is attached to the pipe and whether the connection is serviceable or permanent. The most popular type of PVC fitting connection, known as a slip-socket connection, uses a simple socket opening that is large enough to accommodate the pipe's outside diameter. PVC primer and solvent cement are then applied to the joint, chemically fusing the pipe and fitting into a single, long-lasting, leak-proof connection. For long-term buried and in-wall plumbing systems, slip connections are the norm since they eliminate the need to remove the junction after installation.
For service, valve replacement, and equipment connections where future access is needed, threaded PVC water fittings use male or female NPT threads to provide a mechanical connection that can be assembled and disassembled without tools. A major practical benefit for repair work in small spaces where solvent cement application and curing time are impractical constraints is that push-fit or push-to-connect fittings use an internal grab ring and O-ring seal that grips and seals the pipe when it is pushed into the fitting socket without the need for cement, primer, or threading tools. All three connection styles of VEVOR's PVC fittings are available, and each product has a clear connection technique.
The two most used classes in residential and commercial plumbing are Schedule 40 and Schedule 80. PVC plumbing fittings are produced in various wall thickness grades that match their pressure rating. For most residential cold-water supply, irrigation, and drainage applications where operating pressures stay well within this range, Schedule 40 PVC fittings use a standard wall thickness rated for working pressures of approximately 140 to 280 psi, depending on pipe diameter.
Schedule 80 PVC fittings are the right specification for higher-pressure industrial applications, chemical handling systems, and any installation where pressure surges or elevated operating pressures exceed the Schedule 40 rating margin because they use a heavier wall thickness that increases the working pressure rating by roughly 25 to 30 percent over Schedule 40 at the same nominal pipe size. Schedule 80 is the recommended option for exposed above-ground installations where accidental impact damage is a realistic concern, thanks to its heavier wall, which also provides superior physical impact protection. VEVOR offers Schedule 40 and Schedule 80 PVC fittings, each with a specific pressure rating.
The reliability of PVC fittings across various fluid types, temperature ranges, and installation situations is determined by their material qualities and the range of applications for which they are rated. The high-quality PVC compound used in VEVOR's fittings is suitable for most plumbing and fluid-handling applications.
The most popular thermoplastic material in plumbing and fluid-handling applications is PVC, or polyvinyl chloride, which combines low material cost, smooth-flow surfaces, structural rigidity, and good chemical resistance into a single lightweight, readily worked material. Most typical water-borne chemicals found in residential and commercial plumbing, including mild acids, alkali solutions, and chlorinated municipal water, which would quickly corrode metal fittings of comparable size and pressure rating, do not degrade PVC.
Standard PVC plumbing fittings have a practical operating temperature range that covers the entire spectrum of cold-water supply and room-temperature fluid-handling applications, from nearly freezing to about 140°F for pressure-rated applications. CPVC fittings, made of chlorinated PVC with an increased temperature rating, are the proper substitute for hot-water supply lines and applications where fluid temperatures frequently exceed 140°F. The high-quality PVC compound used to make VEVOR's PVC water fittings meets the standard dimensions and material property requirements for cold-water plumbing applications in homes and businesses.
Pressurized water supply and distribution, gravity drainage and sewer systems, and irrigation system layout are the three main application categories for PVC fittings in residential and light commercial construction. The fitting specifications suitable for each application vary in pressure rating, chemical compatibility, and dimensional standards, making proper application selection crucial for long-term system performance. Pressure-rated Schedule 40 or Schedule 80 fittings that can maintain operational pressure without joint creep or fitting distortion over years of continuous pressurization are necessary for pressurized supply applications.
DWV (drain, waste, and vent) rated fittings, which are made to different dimensional standards than pressure-rated fittings, are used in gravity drainage and sewer applications. Larger sweep radii on elbow fittings reduce flow restriction and solid material accumulation in gravity-flow drain lines, compared with pressure-flow drain lines. PVC fittings for irrigation systems must withstand UV degradation in above-ground applications and soil chemical exposure in buried lateral lines, while preserving joint integrity throughout seasonal freeze-thaw cycles in cold locations. VEVOR's PVC fittings line covers all three application areas, each with precisely defined, application-specific requirements.
From small-diameter PVC water fittings for domestic supply lines to large-format PVC pipe fittings for drainage and commercial plumbing systems, VEVOR offers a complete selection of PVC fittings that cover every common pipe size, fitting geometry, connection type, and pressure rating. Each product offers dependable connection performance and long-lasting materials at an affordable cost for both do-it-yourself installers and professional plumbers. Find the ideal PVC fittings for your project now by browsing VEVOR.com's entire inventory.
For household water supply and irrigation pressure ranges, Schedule 40 fittings employ a typical wall thickness. Schedule 80 fittings are appropriate for industrial applications and higher-pressure systems that exceed the Schedule 40 working pressure specification due to their greater wall thickness, higher pressure rating, and increased impact resistance.
Standard PVC fittings can withstand temperatures up to 140°F in cold-water applications. CPVC fittings, which are made of chlorinated PVC with a higher temperature rating, are the appropriate material standard for safe, dependable long-term performance in hot water supply lines where temperatures frequently exceed this limit.
Yes. Before applying solvent cement, the PVC primer chemically prepares the outside surface of the pipe and the interior of the fitting socket, ensuring that the cement fully adheres across the joint surface. In addition to reducing joint strength, skipping priming increases the risk of gradual joint degradation under prolonged loading.
Because push-fit PVC fittings do not require solvent cement, priming, or threading tools, they are the most practical choice for repair work. For most cold water repair applications, the pipe only needs to be pushed into the fitting socket, where an internal grab ring and O-ring seal provide an instantaneous, watertight connection.
