All

Customer Reviews

  • 4.7
  • 4.5
  • 4.6
  • 4.7
Brightsparkey Brightsparkey
1.5 kW 220V
Does what it says on the tin
Easy to use and seems to work fine. Fan is noisy but at least airflow is adequate. One thing to be aware of is the external button controls don't function the same as the built in panel for stop/start and rev. The external button must be latched to keep the motor running. I used a 3 way rotary switch in the end. No problems encountered with radio noise or interference, and the controller has good control of the motor start and stop speed. Even though it doesn't have braking, the motor spins down fast enough on my lathe. Not enough mileage to comment on reliability, but it been put through its paces with no signs of distress. Shame these units are discontinued, as I have a couple of other machines that could benefit from one.
0
gary howell gary howell
2.2 kW 220V
Easy to use
Found it easy to use and connect up. I find it to be value for money.
0
parwood parwood
2.2 kW 220V
md
a great product essay to set up out of the box wired up and running am really happy with with it the good thing as i can get intouch if there was ever a problem
0
DavidJ DavidJ
1.5 kW 220V
VFD for pillar drill
Excellent quality unit , does all that is required of it. Only thing is that for a relatively inexperienced engineer set-up proved to be a little complex. Used to enable the use of a 3 phase Pillar drill where only sigle phase available. However achieved and now understand the manual much better. Will buy again for 3 other machines in due course
0
Steve Steve
1.5 kW 220V
Mr
Does what it's supposed to at a great price. Time will tell on reliability but its holding up so far
0
Laurens Laurens
4 kW 220V
Awesome cheap solution.
This really is a nice piece of kit. Four stars for quality because the housing is really cheap brittle plastic. I use it to power a three phase piston compressor and without any problems. The start/stop input wired to the pressure switch, the output of the regulator directly to the motor and bang! Done. Easy to set up and does what it promises. If I need another one, I will get a Vevor again.
0
benda benda
2.2 kW 220V
VFD 2,2Kw
Super fast delivery - 2 days, good product, arrived slightly damaged - 2 locking lugs securing the PVC cover and front panel were broken. It's a small thing, but I'm still sorry, but it doesn't affect the functionality.
0
FOTINI FOTINI
4 kW 220V
5hp 4kw 220v Vfd Capability Variable Frequency Drive Avc Motor
Very Good Seller super quick delivery very excellent packet and very good product, Will buy again from this seller. It's one of the fastest order I've It is one of the best products I have ever bought a very good machine
0
Engineer Engineer
1.5 kW 220V
Mr
Arrived safely and worked very well.Has all the various functions that I need when I used it to run and regulate my 72 x 2 Belt Grinder
0
Zrt121 Zrt121
1.5 kW 220V
It works Amazing
Bought this to try it, It was a low price, I have a Fobco Star drill with A three Phase motor, and I wanted to power it with 240v power. I rewired the motor To delta 240V , I had to change the setting from 400HZ to 50HZ and the motor starts and runs perfect , It is best to read the whole manual as there are a lot of setting that you can change. I bought the 1.5KW unit and it powered an old 0.33BHP / 0.25KW motor with no problems
0

People Who Bought This Item Also Bought

44-330-175-5511 Monday to Friday, 08:00-16:00, GMT+1 ©2009 - 2022 VEVOR All Rights Reserved