Customer Reviews for VEVOR 20U Open Frame Server Rack, 58.5-101.6cm/223-40 in Adjustable Depth, Free Standing or Wall Mount Network Server Rack, 4 Post AV Rack with Casters, Holds All Your Networking IT Equipment AV Gear Router Modem

Great quality, easy assembly, sturdy workhorse, casters are great for my application. Can't vouch for wall mounting system, but it looks beefy enough to hold whatever you can throw at it. Only MINOR issue is that all the threaded holes for assembly weren't cleaned out after powder-coating, so you'll need to either re-tap them for a silky assembly, or just power through with a standard drill-driver, which worked just fine. Arrived with the front and back faces pre-assembled, and the 4 depth arms pre-assembled at the minimum 23" depth (where I left them-can't vouch for sturdiness at full extension, but all steel felt plenty thick and well built for purpose everywhere else). The casters roll and rotate super smooth, even after loading. Lid (or bottom) was thick/sturdy enough for tools and supplies when installed half hanging over the back edge during installation work. 10/10 recommend that technique, and 11/10 recommend the product when considering the great price. - home user, 1st rack build

Nice and sturdy rack. I like it very much.

Tukeva laiteteline, laadukas, lukittavat pyörät liikkuu helposti, tilaa paljon

Muy bueno y resistente, deejorncalidad de lo que esperaba

This is a decent rack, especially for how little it cost I can't complain much. Although I'm about to describe what I didn't like about it, I would buy this rack again if I needed a second one. For about a third to a quarter of the cost for something of comparable size elsewhere, it's worth making a few adjustments to make it work. First thing, although this rack is(I think) rated for around 500 pounds, the casters and caster plates don't do well with any real weight. The caster pins and the mounting plate were both bending badly while I was getting it loaded up, and I ended up just removing the casters altogether and bolting the rack to a large 1200lb Harbor Freight furniture moving "skateboard", and it works great. Second thing that I didn't expect but should have, the vertical rails are a bit thinner than the more expensive racks, and bend easily with unsupported cantilevered loads, even light ones. This rack will definitely need server mount rails, or a mixture of the rails and fabricated shelves like I did. It's a pretty solid little rack, and is doing well. I configured mine as 28" depth, so the top cover plate doesn't cover the whole top, but I use the top as a place for my 3D printer enclosure. If you're networking on a budget, this is a good rack to get started.

Tolles stabiles Rack. Zusammenbau war einfach.

Finally found a decent sized rack. Most of the new stuff isn't deep enough for older servers, this works perfectly, doubted it's strength to start with, but it's really solid once finished.

THEY COME WITH (2) SHELVES. (1) 1u shelf unit and (1) 2u shelf unit. Within the products photos it shows that it has 2 shelved but in the descriptions, it doesnt state if that. I can confirm the "12U Open Frame Server Rack with wheels" physically come with 2 shelves. No need to buy separate if you are concerned

La robustezza mi ha veramente impressionato, stabile, ha una precisione della fabbricazione che non si presta a tolleranze anche minime "Full Standard" Ruote ben dimensionate ed efficaci e che dire della dotazione dei piani "3 unità + 1 unità Rack Inclusi? " Una qualità prezzo-prestazioni per davvero straordinaria. Uso: posseggo un mixer da studio con un alimentatore Triale che ha un peso di 32 Kg, era sistemato su un rack statico ma c'è sempre la necessità di spostare qualcosa nella stanza laboratoriale in vista di un suo rimontaggio in una scuola per fonici e devo dire che il risultato di utiliy è quello delle foto, Insieme al grande alimentatore del Mixer ho montato anche uno degli amplificatori finali dei monitor studio e ne monterò un secondo, è perfetto.

Bonjour, Après plus d'un an d'usage, rack robuste mais les vis autoperforantes font que le démontage et le remontage sont parfois délicats. POINT très NÉGATIF si le rack est lourdement chargé (100kg), les roulettes semblent adaptées pour des charges lourdes MAIS LES SUPPORTS DES ROULETTES se TORDENT très FACILEMENT (tôle trop mince) et vrillent la roulette.