The metal plate that goes on the top was pretty badly damaged, the corner was bent meaning the plate had to be orientated in a certain way7 or it wouldn't fit. There is a lot of scrapes on the top plate. Everything else was alright, though the screws requiring an hex key is annoying, just use regular flat/phillips head screws.

Easy to assemble and surprisingly sturdy. Although I should have got higher. But I didn't know better.

Pros:- Rack arrived very well packed on a flat pack, no scratch marks or paint issues.- Easy to Assemble (The assembly instructions came completely teared but were not needed as the rack is very very easy to assemble)- Very sturdy- Compact for an Open Frame- Price was very good- Seller was really gentle and polite all times I needed to contact him/her.- Would definitely buy again !!!!!Cons:- Dimensions in description are completely wrong and don't reflect a 24U (but a 26U instead). Server rack is 121cm tall (no wheels) and 130cm tall (with wheels). This took me ages to find out before buying the rack. I put it inside an IKEA furniture so I needed to know the exact measurements, contacted the vendor and they told me 26U and 24U had the same (for my surprise). PLEASE, update the measurements. Your graphic marketing content is using the same measurements for both 24U and 26U.OBS:- Stock issues: When I bought the item there was 7 in stock, but after I bought it the seller contacted me saying they had a problem with the stock, and it would be remediated as soon as they received the item again. The item took just 10 days to arrive, and it was sent to me before expected. Very good contact with the seller.

This arrived much earlier than estimated in my case.It comes in an ikea-style flatpack, there are no instructions included to assemble it :-) but by studying the photos in the Amazon listing, you can see how to put it together. - You will need to prepare a spanner and screwdriver, posi or flathead. - The vertical bars are in three pieces and take two clamps held by four nuts and bolts each. - Then add the castors to the base, - the vertical bars to the base, - then the central tray, - and finally the top.All in all it took about an hour to put it together.The results were good, it is stable, solid and happily took a bunch of 19 inch rackmount things only bolted in at the front and with no other support. I did not wear gloves and there were no snags on the metalwork to cut my hands. One corner of the lid was slightly bent out, but I tapped it on the ground and it was enough to realign it. There were a couple of edges that lost the power-coating but nothing too bad.You'll need to buy your own captive nuts and rack bolts separately.Overall if I needed another one, I would buy another of these without hesitating, the price / performance is very good.