Download VEVOR App 
Exclusive 5,00€ off for your first three orders on the App.
Scan the QR code to download
For contractors, certified electricians, and skilled do-it-yourselfers in need of long-lasting, code-compliant building wire for light industrial, commercial, and residential electrical installations, VEVOR manufactures THHN wires. VEVOR offers all the gauges, spool lengths, and conductor colors required for professional-grade electrical work, ranging from heavy 10 AWG THHN wire for high-draw appliance circuits to fine 14 AWG branch circuit wiring. Use VEVOR's extensive selection of THHN wire to wire your project properly.
On every installation, do you need dependable THHN wire that complies with NEC regulations and draws neatly through conduit? VEVOR THHN wires are available in the gauges and spool lengths most commonly used by electricians and contractors, and they feature smooth nylon-jacketed insulation over stranded or solid copper conductors. VEVOR offers the appropriate specification, whether you require THHN 12 AWG wire for typical branch circuits or 10 AWG THHN wire for specialized appliance runs.
The two purchasing variables that have the greatest direct impact on whether a THHN wire purchase covers the entire scope of an installation and whether the conductor can safely handle the circuit load are current load, wire gauge, and spool length. It is necessary to match both to the particular circuit specifications before ordering or pulling any wires.
The current-carrying capability of a THHN wire is determined by its American Wire Gauge (AWG) rating; choosing the appropriate gauge for each circuit is both a performance requirement and a requirement to comply with the National Electrical Code. The VEVOR THHN wires cover the amperage range from conventional branch circuits to high-draw dedicated equipment circuits. They are available in the most commonly required residential and commercial gauges, ranging from 14 AWG to 6 AWG. Rated for 20-amp circuits that supply outlets in the kitchen, bathrooms, garage, and general-purpose outlets throughout the house, THHN 12 AWG wire is the most often used gauge in residential branch circuit wiring.
For electric dryer circuits, water heater connections, and dedicated air conditioner circuits that require more current than a typical 20-amp branch circuit can safely give, switching to 10 AWG THHN wire raises the current capability to 30 amps, which is the standard specification. For subpanel feeder applications, large HVAC equipment, and electric ranges, heavier 8 AWG and 6 AWG THHN wire manage 40 to 55 amp circuits. VEVOR's product descriptions include suggested circuit breaker sizing and ampacity ratings for each gauge, giving knowledgeable do-it-yourselfers and electricians the reference information they need to make the right choice without contacting outside sources in the middle of a project.
There are two types of THHN wire: solid and stranded conductor. The installation type, conduit routing, and flexibility needs of the particular job will determine which type is best, not just personal taste.
For in-wall and structural wiring, solid conductor THHN wire uses a single, undamaged copper conductor. The wire travels in a conduit with a comparatively straight course, eliminating the need for flexibility before or after installation. At outlets, switches, and panel lugs, solid conductors provide dependable, low-resistance connections and cleanly terminate in screw-terminal devices.
To provide the flexibility required for longer conduit pulls with several bends, connections to vibration-sensitive equipment, and installations where wire routing necessitates frequent flexing, stranded conductor THHN wires use multiple fine copper strands twisted together. For installers whose conduit routing requires the extra draw flexibility that stranded construction offers over solid wire of the same gauge, VEVOR offers both constructions across its most common gauge offerings: stranded 12 gauge THHN wire and 10 AWG THHN wire alternatives.
Purchasing insufficient wire for a project results in a mid-project supply run, which is time-consuming and disrupts workflow. Purchasing significantly more than is necessary wastes money on materials. VEVOR THHN wires come in spool lengths ranging from 50-foot pull boxes for minor repair and extension tasks to 500-foot and 1,000-foot spools for commercial installs and full-home wiring projects. For the majority of single-circuit upgrades, such as wiring a small outbuilding, extending an existing circuit, or adding a new outlet run, a 50 to 100-foot spool of THHN 12 AWG wire is sufficient.
To cover all branch circuits without numerous partial spool orders, full residential rough-in projects usually require 250- to 500-foot spools per gauge. VEVOR's 500 to 1,000-foot bulk spool options are ideal for commercial and multi-unit residential projects that require hundreds of feet per circuit on each level. This feature ensures a steady supply throughout the project's lifespan and reduces the material cost per foot. Due to VEVOR's spool length range, purchasers of all project sizes can acquire a properly sized quantity, avoiding the need to choose between wasteful bulk quantities that exceed project needs or insufficient small packs.
To ensure safe, traceable circuit identification during an electrical installation, NEC conductor color-coding rules are in place. VEVOR THHN wires meet the hot, neutral, and ground identification criteria of typical residential and commercial circuit wiring and come in the normal NEC-specified conductor colors of black, red, white, green, and bare. THHN wire features the typical color scheme for branch-circuit live conductors in North American electrical installations, with red for ungrounded hot conductors on 240V circuits and black for those on 120V circuits.
Green or bare indicates the equipment grounding conductor, while white THHN wire indicates the grounded neutral conductor. Instead of sourcing colors from multiple vendors, VEVOR's conductor color range enables contractors and electricians to obtain appropriately color-coded wire for every circuit type in a single supplier relationship. VEVOR's complete conductor color availability is a practical professional need rather than a convenience feature for multi-circuit panel work, because circuit traceability across hundreds of breaker locations depends heavily on consistent color coding from installation day onward.
The heat rating, moisture resistance, and nylon jacket characteristics of THHN wire's insulation system dictate where and how the wire can be lawfully and safely installed in a variety of environmental and application conditions.
A marking that distinguishes the insulation material and its performance ratings is THHN, which stands for Thermoplastic High Heat-resistant Nylon-coated conductor. Most contemporary building wires adhere to the THHN/THWN dual-rated specification, which is defined by the conventional 90°C dry-location and 75°C wet-location temperature ratings carried by VEVOR THHN wires. With a 90°C rating for dry-conduit installations, the thermoplastic PVC insulating layer serves as the primary dielectric barrier in ambient and conductor temperature combinations found in attic spaces, mechanical rooms, and conduit lines near heat-generating equipment.
For conduit runs exposed to condensation, outdoor conduit, underground raceways or duct banks, and damp basement or crawlspace installations, the outer nylon jacket offers two advantages: it provides mechanical protection against abrasion during conduit pulling and moisture resistance that grants the wire its THWN wet-location rating. The insulation thickness, material characteristics, and nylon jacket performance of VEVOR's THHN wire insulation system are designed to meet the performance criteria referenced in NEC installation requirements and to comply with UL 83 listing requirements.
VEVOR THHN wires are the right choice for conduit installations, which are the NEC-mandated installation technique for the majority of exposed, commercial, and multi-family residential wiring situations where listed cable assemblies do not conceal wiring. Where local code requires conduit, 12 gauge THHN wire pushed through PVC or EMT conduit serves outdoor receptacle runs, garage outlets, kitchen circuits, and bathroom circuits in residential construction.
Every residence has 30-amp dedicated circuits for water heaters, dryers, and HVAC equipment, which are often wired with 10 AWG THHN conductors in conduit, following local code requirements. Commercial applications use VEVOR THHN wire in conduit for panel feeder lines, office outlet circuits, lighting branch circuits, HVAC equipment connections, and more. The wire spans the entire gauge range from 12 AWG to 6 AWG and higher. With its dual THHN/THWN insulation rating, color-coded conductor options, spool lengths, and gauge range, VEVOR is a convenient source for a wide range of conduit wiring needs in both light commercial and residential electrical installations.
To ensure electricians, contractors, and skilled do-it-yourselfers properly wire residential and commercial projects from the initial pull to the last connection, VEVOR THHN wires offer precision copper conductors, code-compliant insulation ratings, and the gauges and lengths they require. Whether you require strong 10 AWG THHN wire for dedicated appliance runs or 12 AWG THHN wire for branch circuits, VEVOR's entire range offers all specifications at affordable prices with dependable post-purchase assistance. Check out the entire VEVOR collection right now.
The dual THHN/THWN rating is present on most VEVOR THHN wires. THWN offers 75°C wet-location suitability for conduit lengths exposed to moisture, while THHN supports 90°C dry-location application. Before wet-location installation, confirm the wire's dual rating on its label.
According to NEC regulations, THHN 12 AWG wire is the standard specification for 20-amp branch circuits. For 30-amp circuits that require greater current capacity, such as those for specialized air conditioners, water heaters, and electric dryers, use 10 AWG THHN wire.
THHN wire is a conduit-rated building wire; it is not a listed cable assembly for open-air wiring without conduit or direct burial. As specified by the NEC for the particular installation location and application, THHN wire should always be installed inside designated conduit systems.
Straight conduit lines and screw-terminal device connections are suitable for solid THHN wire. In situations where stiff, solid conductors would wear out and break, stranded 12 gauge and 10 AWG THHN wire offer flexibility for long conduit draws with several bends and connections to vibrating equipment.
For the majority of single-circuit expansions, a 50–100 foot spool is sufficient. To ensure enough wire reaches every connection point without splicing in the middle, measure the entire conduit run from the panel to the last device, add 20% for bends and termination tails, then round up to the next available spool length.
