Kundeanmeldelser for VEVOR lineær styreskinnesæt, SBR16 1000 mm, 2 STK 39,4 tommer/1000 mm SBR16 styreskinner og 4 STK SBR16UU glideblokke, lineære skinner og lejesæt til automatiserede maskiner DIY Project CNC routermaskiner

Guias de muita qualidade , construidas com muita precisão e muito bons materiais ,com otimas afinações e ajustes , a melhor qualidade /preço que encontrei

Works very well. Built table for the table saw with a miter gauge as a device. Laser to show cut line. Since there was only 1200 mm length in stock at Vevor, I put the guide rails on the plate with the sliding blocks on the first half, and small support wheels after that. This is how I got a longer cutting length. Works very well.

I built a cnc desk top machine several years ago and used simular parts but about half the size and even with importing the parts directly from China it cost me well over 3 times the price I had checked the price of parts in uk but they would have cost a lot more than I could afford, this set has all of the mechanical parts you would need to build your own cnc cutter/engraver except for the base which could be any type of stiff board like a piece of kitchen worktop, I am going to use a workbench which I bought from amazon :- https://www.amazon.co.uk/dp/B0CNGHX25M?psc=1&ref=ppx_yo2ov_dt_b_product_details As it is a great heavy duty workbench which has adjustable legs which allow 3 different heights so you can use it sat down or stood up I have 2 of them which I use with the wheels fitted and if you want to move it it is very easy to move and it you want it not to it has brakes on the wheels and doesn't move at all. The only other thing it will need is stepper motors plus drivers, a program controller, and power supply's which will require 48 volts for the stepper motors and a 12 volt supply for the program controller and limit switches. I will add photos once built.

I wasn't expecting much for this price but was surprised at the accuracy. Still need to do some tests for backlash in the lead screws but as yet they're absolutely solid. Guide rails aren't the best but perfectly adequate for my use and a little tweaking mops up the slop. Very happy with these.

Absolutely perfect quality and good price

It feel bad before cleaning, a lot of grit in the bearings but after a lot of cleaning an new lubricant they works good.

Material as the description, delivery on time, very well packed, works perfectly, no problems so far.

Arrived within a few days, very well packaged, rails look top quality, slide bearings are of variable quality (have an amount of slop in them and aren´t the smoothest of action) but I will wash out the bearings and repack with grease and for the application this should not be an issue. For the price not a bad product.

A ajuns cam tarziu de la curier la destinatie, dar produsul este exact ce am comandat. sosit in depozit curier 29 dec. si livrare in 11 ian.

Pair of rails is the exactly the same I expected Pair of rails is the exactly the same I expected Pair of rails is the exactly the same I expected Pair of rails is the exactly the same I expected Pair of rails is the exactly the same I expected Pair of rails is the exactly the same I expected Pair of rails is the exactly the same I expected Pair of rails is the exactly the same I expected